›› 2018, Vol. 39 ›› Issue (2): 745-752.doi: 10.16285/j.rsm.2016.0340

• 数值分析 • 上一篇    下一篇

基于广义塑性理论的尾砂本构模型在ABAQUS中的二次开发

崔 旋1, 2,董威信1, 2,周汉民1, 2,孙书伟3   

  1. 1. 北京矿冶科技集团有限公司,北京 100160;2. 北京矿冶科技集团有限公司 金属矿山智能开采技术北京市重点实验室,北京 102628; 3. 中国矿业大学(北京) 资源与安全工程学院,北京 100083
  • 收稿日期:2016-04-09 出版日期:2018-02-10 发布日期:2018-06-06
  • 作者简介:崔旋,男,1987年生,硕士,高级工程师,主要从事矿山尾矿库方面的研究工作。
  • 基金资助:

    国家重点研发计划项目(No. 2017YFC0804608)。

Secondary development of a constitutive model in ABAQUS for tailings sand using generalized plasticity theory

CUI Xuan1, 2, DONG Wei-xin1, 2, ZHOU Han-min1, 2, SUN Shu-wei3   

  1. 1. Beijing Mining & Metallurgy Technology Group Co., Ltd., Beijing 100160, China; 2. Beijing Key Laboratory of Nonferrous Intelligent Mining Technology, Beijing Mining & Metallurgy Technology Group Co., Ltd., Beijing 102628, China; 3. Faculty of Resources and Safety Engineering, China University of Mining and Technology (Beijing), Beijing 100083, China
  • Received:2016-04-09 Online:2018-02-10 Published:2018-06-06
  • Supported by:

    This work was supported by the National Key R & D Program of China (2017YFC0804608).

摘要: 建立尾砂的本构模型是开展尾矿坝数值模拟和安全评价的重要基础,而目前尾砂的本构模型研究多集中于非线性弹性模型,如Duncan-Chang模型,关于弹塑性模型的研究较少。结合尾砂的应力-应变特性,提出了一种适用于描述尾砂力学特性的改进广义塑性模型。基于用户自定义材料子程序UMAT,将提出的模型在ABAQUS中二次开发实现,应力积分采用Runge-Kutta显式积分。通过三轴试验模拟验证,偏差应力曲线表明,有限元计算结果可以反映围压对应力-应变关系的影响,抗剪强度随应变逐渐硬化,达到峰值强度,随后发生应变软化,抗剪强度有所下降。体应变曲线结果表明,广义塑性模型可以很好地描述体应变曲线的体缩-体胀发展过程,与试验曲线吻合较好。同时有限元数值模拟结果和理论值误差很小,且和试验结果拟合较好。该研究成果可进一步用于尾矿坝的应力变形计算和安全评价。

关键词: 尾砂, 广义塑性模型, ABAQUS, UMAT, 三轴试验

Abstract: Constitutive model of tailings sand plays an important role in the numerical simulation and security evaluation of tailings dam. However, current researches focus on nonlinear elastic model such as Duncan-Chang model, but less on elastoplastic model. A modified generalized plasticity model considering the stress-strain property of tailings sand is proposed to describe the mechanical characteristics of tailings sand. The constitutive model is developed in ABAQUS with user defined material subroutine UMAT and explicit stress integration of Runge-Kutta method. Finally, the modified model is verified in ABAQUS by triaxial test simulation. The deviatoric stress curve shows that the results of finite element method can reflect the influence of confining pressure on stress-strain relationship. And the shear strength gradually increases with strain increases, followed by strain softening after reaching the peak strength. Volumetric strain calculation results show that the generalized plasticity model can well describe the volumetric strain development, which is in good agreement with the experimental curve. Meanwhile, finite element computation data match well with test data, and the theoretical value. The research results can be further used in the stress-strain analysis and security evaluation of tailings dam.

Key words: tailings sand, generalized plasticity model, ABAQUS, UMAT, triaxial test

中图分类号: 

  • TD 164

[1] 孟庆彬, 王杰, 韩立军, 孙稳, 乔卫国, 王刚, . 极弱胶结岩石物理力学特性及本构模型研究[J]. 岩土力学, 2020, 41(S1): 19-29.
[2] 李丽华, 余肖婷, 肖衡林, 马强, 刘一鸣, 杨 星, . 稻壳灰加筋土力学性能研究[J]. 岩土力学, 2020, 41(7): 2168-2178.
[3] 杨志浩, 岳祖润, 冯怀平, . 非饱和粉土路基内水分迁移规律试验研究[J]. 岩土力学, 2020, 41(7): 2241-2251.
[4] 王康宇, 庄妍, 耿雪玉, . 铁路路基粗粒土填料临界动应力试验研究[J]. 岩土力学, 2020, 41(6): 1865-1873.
[5] 梁珂, 陈国兴, 刘抗, 王彦臻, . 饱和珊瑚砂最大动剪切模量的 循环加载衰退特性及预测模型[J]. 岩土力学, 2020, 41(2): 601-611.
[6] 梁珂, 何杨, 陈国兴, . 南沙珊瑚砂的动剪切模量和阻尼比特性试验研究[J]. 岩土力学, 2020, 41(1): 23-31.
[7] 周家作, 韦昌富, 魏厚振, 杨周洁, 李力昕, 李彦龙, 丁根荣, . 多功能水合物沉积物三轴试验系统的研制与应用[J]. 岩土力学, 2020, 41(1): 342-352.
[8] 高运昌, 高盟, 尹诗, . 聚氨酯固化海砂的静力特性试验研究[J]. 岩土力学, 2019, 40(S1): 231-236.
[9] 孔亮, 刘文卓, 袁庆盟, 董彤, . 常剪应力路径下含气砂土的三轴试验[J]. 岩土力学, 2019, 40(9): 3319-3326.
[10] 陈宇龙, 内村太郎, . 基于弹性波波速的降雨型滑坡预警系统[J]. 岩土力学, 2019, 40(9): 3373-3386.
[11] 陈永青, 文畅平, 方炫强, . 生物酶改良膨胀土的修正殷宗泽模型[J]. 岩土力学, 2019, 40(9): 3515-3523.
[12] 丁艳辉, 张丙印, 钱晓翔, 殷 殷, 孙 逊. 堆石料湿化变形特性试验研究[J]. 岩土力学, 2019, 40(8): 2975-2981.
[13] 孔宪京, 宁凡伟, 刘京茂, 邹德高, 周晨光, . 应力路径和干湿状态对堆石料颗粒破碎的影响研究[J]. 岩土力学, 2019, 40(6): 2059-2065.
[14] 宫凤强, 伍武星, 李天斌, 司雪峰, . 深部硬岩矩形隧洞围岩板裂破坏的试验模拟研究[J]. 岩土力学, 2019, 40(6): 2085-2098.
[15] 李建朋, 高岭, 母焕胜. 高应力卸荷条件下砂岩扩容特征及其剪胀角函数[J]. 岩土力学, 2019, 40(6): 2119-2126.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!