模型相似材料内部应变光纤量测应变传递

doi:10.16285/j.rsm.2016.0370

›› 2018, Vol. 39 ›› Issue (2): 759-764.doi: 10.16285/j.rsm.2016.0370

模型相似材料内部应变光纤量测应变传递

孙阳阳¹，王源²，张清华¹，段建立¹，张文渊²，章征林²，由泽伟²

1. 解放军理工大学国防工程学院，江苏南京 210007；2. 解放军理工大学爆炸冲击防灾减灾国家重点实验室，江苏南京 210007

收稿日期:2016-04-19 出版日期:2018-02-10 发布日期:2018-06-06
作者简介:孙阳阳，男，1983年生，博士，主要从事光纤传感与系统集成工作。
基金资助:
国家自然科学基金重大科研仪器研制项目（No. 51527810）；国家自然科学基金青年基金（No. 51608528）。

Strain transfer of internal strain of model similar materials with optical fibre measurement

SUN Yang-yang¹, WANG Yuan², ZHANG Qing-hua¹, DUAN Jian-li¹, ZHANG Wen-yuan², ZHANG Zheng-lin², YOU Ze-wei²

1. College of Defense Engineering, PLA University of Science and Technology, Nanjing, Jiangsu 210007, China; 2. State Key Laboratory of Disaster Prevention & Mitigation of Explosion & Impact, PLA University of Science and Technology, Nanjing, Jiangsu 210007, China

Received:2016-04-19 Online:2018-02-10 Published:2018-06-06
Supported by:
This work was supported by the Development of the Testing Apparatus for Simulating and Instrumenting (51527810) and the National Natural Science Foundation of China for Young Scholars (51608528).

摘要/Abstract

摘要： 应用光纤传感技术测量模型相似材料内部应变，必须解决光纤与相似材料耦合的问题。传统的研究中普遍存在应变传递理论分析结果无法通过试验检验的问题。设计实现了一种基于光纤-胶体-相似材料3层应变传递结构的光纤Bragg光栅（FBG）相似材料一维传感器。通过对该传感器应变传递特性和标定方法的研究探索解决光纤与相似材料耦合性的问题。该传感器采用无涂覆层的光纤Bragg光栅作为传感元件，将光纤埋入相似材料应变试件内部直接测量轴向中心应变。通过应变传递理论分析、数值模拟以及全新设计的标定试验研究3种方法研究了该相似材料光栅传感器的应变传递特性。平均应变传递率结果显示3种方法所得到的数值非常接近，表明该传感器的光纤、胶体、相似材料具有良好的耦合性以及应变测量的准确性。该方法为解决模型相似材料内部三维应变测量提供了可行方案。

关键词: 相似材料, 内部应变, 应变传递, 光纤

Abstract: The optical fibre sensing technology has been widely used to measure the internal strain of similar material. However, the coupling between the optical fibre and similar materials has not yet been resolved. In previous studies, theoretical results of strain transfer cannot be validated in the experiments. A one-dimensional optical fibre Bragg grating (FBG) similar material was designed and realized using three layers of fibre-adhesive-similar material. The sensor provides a method to solve the problem of coupling between the fibre and similar material. The FGB sensor without coating layer was used as the sensing element, and the axial centre strain was measured by using the fibre embedded in the similar-material strain testing pieces. We investigated the behaviour of strain transfer using theoretical analysis, numerical simulation and a newly designed calibration. The results of the average strain transfer rate of the sensor obtained by different methods were very close, which demonstrated good coupling among fibre, adhesive and similar material. Moreover, the accuracy and reliability of theoretical analysis and numerical simulation were verified by a new calibration experiment. The method provides a feasible solution for the three-dimensional strain measurement of similar material in the model.

中图分类号:

O 319.56

孙阳阳，王源，张清华，段建立，张文渊，章征林，由泽伟,. 模型相似材料内部应变光纤量测应变传递[J]. , 2018, 39(2): 759-764.

SUN Yang-yang, WANG Yuan, ZHANG Qing-hua, DUAN Jian-li, ZHANG Wen-yuan, ZHANG Zheng-lin, YOU Ze-wei,. Strain transfer of internal strain of model similar materials with optical fibre measurement[J]. , 2018, 39(2): 759-764.

参考文献

相关文章 15

[1]	徐刚, 张春会, 于永江, . 综放工作面覆岩破断和压架的试验研究及预测模型[J]. 岩土力学, 2020, 41(S1): 106-114.
[2]	宁奕冰, 唐辉明, 张勃成, 申培武, 章广成, 夏丁, . 基于正交设计的岩石相似材料配比研究及底摩擦物理模型试验应用[J]. 岩土力学, 2020, 41(6): 2009-2020.
[3]	侯公羽, 胡涛, 李子祥, 谢冰冰, 肖海林, 周天赐, . 基于分布式光纤技术的采动影响下覆岩变形演化规律试验研究[J]. 岩土力学, 2020, 41(3): 970-979.
[4]	秦伟, 戴国亮, 马李志, 裴铭海, 王磊, 朱光耀, 高博, . 珊瑚礁地层中PHC桩原位静载试验研究[J]. 岩土力学, 2019, 40(S1): 381-389.
[5]	许江, 邬君宇, 刘义鑫, 雷娇, . 不同充填度下岩体剪切−渗流耦合试验研究[J]. 岩土力学, 2019, 40(9): 3416-3424.
[6]	储昭飞, 刘保国, 任大瑞, 宋宇, 马强, . 软岩流变相似材料的研制及物理模型试验应用[J]. 岩土力学, 2019, 40(6): 2172-2182.
[7]	侯公羽, 韩育琛, 谢冰冰, 魏广庆, 李子祥, 肖海林, 周天赐, . 定点式布设光纤在隧道结构健康监测中的预拉应变损失研究 [J]. 岩土力学, 2019, 40(10): 4120-4128.
[8]	姚爱军，张剑涛，郭海峰，郭彦非. 地铁盾构隧道上方基坑开挖卸荷-加载影响研究[J]. , 2018, 39(7): 2318-2326.
[9]	雷文凯，肖衡林，张金团，刘永莉，范萌, . 基于光纤检测技术的夹泥灌注桩模型试验[J]. , 2018, 39(3): 909-916.
[10]	刘金辉，李文枭，刘宇森，刘保国，. 多孔含水岩层的相似材料配比研究[J]. , 2018, 39(2): 657-664.
[11]	汪北方，梁冰，王俊光，孙可明，孙维吉，迟海波，. 煤矿地下水库岩体碎胀特性试验研究[J]. , 2018, 39(11): 4086-4092.
[12]	徐楚，胡新丽，何春灿，徐迎，周昌. 水库型滑坡模型试验相似材料的研制及应用[J]. , 2018, 39(11): 4287-4293.
[13]	白晓宇，张明义，匡政，王永洪，闫楠，朱磊，. 光纤光栅传感技术在GFRP抗浮锚杆现场拉拔试验中的应用[J]. , 2018, 39(10): 3891-3899.
[14]	岳哲，叶义成，王其虎，姚囝，施耀斌. 基于量纲分析的岩石相似材料抗压强度计算模型[J]. , 2018, 39(1): 216-221.
[15]	刘晓云，叶义成，王其虎，张华，刘艳章，刘洋，. 单轴压缩下不同强度组合复合岩体相似材料试件力学特性研究[J]. , 2017, 38(S2): 183-190.

Metrics

Viewed

Full text

Abstract

Cited

Shared

Discussed

模型相似材料内部应变光纤量测应变传递

Strain transfer of internal strain of model similar materials with optical fibre measurement

PDF (Chinese)

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

Metrics

本文评价

推荐阅读 0