›› 2016, Vol. 37 ›› Issue (6): 1597-1602.doi: 10.16285/j.rsm.2016.06.009

• 基础理论与实验研究 • 上一篇    下一篇

圆孔缺陷与I型运动裂纹相互作用的试验研究

杨仁树1, 2,许 鹏1, 2,岳中文1, 2,陈 程1, 2   

  1. 1. 中国矿业大学(北京)力学与建筑工程学院,北京 100083;2. 中国矿业大学(北京) 深部岩土力学与地下工程国家重点试验室,北京 100083
  • 收稿日期:2016-01-13 出版日期:2016-06-13 发布日期:2018-06-09
  • 通讯作者: 许鹏,男,1987年生,博士生,主要研究岩石动态断裂。E-mail: pxcumtb@163.com E-mail:yrs@cumtb.edu.cn
  • 作者简介:杨仁树,男,1963年生,博士,教授,博士生导师,主要研究方向为动态断裂力学、工程爆破等。
  • 基金资助:

    国家自然科学基金煤炭联合基金重点项目(No.51134025);高等学校学科创新引智计划资助(No.B14006)。

Laboratory study of interaction between a circular hole defect and mode I moving crack

YANG Ren-shu1, 2, XU Peng1, 2, YUE Zhong-wen1, 2, CHEN Cheng1, 2   

  1. 1. School of Mechanics & Civil Engineering, China University of Mining & Technology (Beijing), Beijing 100083, China; 2. State Key Laboratory for Geomechanics and Deep Underground Engineering, China University of Mining & Technology (Beijing), Beijing 100083, China
  • Received:2016-01-13 Online:2016-06-13 Published:2018-06-09
  • Supported by:

    This work was supported by the National Natural Science Foundation-Coal Joint Foundation of China (51134025) and the Program of Introducing Talents of Discipline to Universities (B14006).

摘要: 为了研究运动裂纹与圆形孔缺陷的相互作用机制,采用数字激光动态焦散线方法进行了含圆形孔缺陷的冲击试验。结果表明:在冲击载荷下,I型运动裂纹在与圆形孔贯通前,断裂面光滑,扩展路径平直;运动裂纹从圆形孔上端起裂后,断裂面凹凸不平,扩展路径也更为弯曲。当运动裂纹朝向邻近的圆形孔扩展时,圆形孔对运动裂纹的扩展速度和动态应力强度因子有抑制作用,且随着圆形孔直径的增大,这种抑制作用不断增强。当运动裂纹与圆形孔缺陷汇聚后,圆形孔阻碍了裂纹的继续扩展,裂纹尖端被钝化,钝裂纹的起裂韧度较尖裂纹提高9.58%~13.87%,裂纹再次起裂时的扩展速度和动态应力强度因子存在明显的跳跃,表明钝裂纹更难起裂,需要消耗的能量更多。

关键词: 焦散线, 运动裂纹, 圆形孔缺陷, 裂纹扩展速度, 动态应力强度因子

Abstract: Using the digital-laser dynamic caustic system, the impact tests are utilized to investigate the interaction mechanism between a circular hole defect and mode I moving crack. The result shows that, under impact loading, the fracture face is relatively smooth and the growth path is straight towards the hole before the coalescence of moving crack and the round hole. After the moving crack initiates at the top of the round hole, the fracture face is relatively bumpy and the growth path is relatively bent. When the mode I moving crack propagates towards the adjacent round hole, the round hole plays a suppressive effect on crack growth velocity and dynamic stress intensity factor of moving crack. The suppressive effect becomes apparent with the increase of round hole diameter. After the crack-hole coalescence, the moving crack is arrested abruptly and the crack tip becomes blunt. The initiation toughness of the blunt crack increases about 9.58%-13.87% than that of the tip fracture. The crack growth velocity and dynamic stress intensity factor of the blunt crack show obvious jump when the crack initiates again at the hole, indicating that the more energy consumption is needed for blunt crack initiation.

Key words: caustic, moving crack, round hole, crack growth velocity, dynamic stress intensity factor

中图分类号: 

  • O 346.1

[1] 李 清,于 强,徐文龙,万明华,张 正,吕 陈,王汉军,. 应变片法确定Ⅰ型裂纹动态应力强度因子试验研究[J]. , 2018, 39(4): 1211-1218.
[2] 郭 洋,李 清,徐文龙,钱 路,田 策. 条形药包爆破预制贯通裂纹动态断裂过程研究[J]. , 2018, 39(10): 3882-3890.
[3] 杨仁树,苏 洪,龚 悦,陈 程,. 爆炸荷载下不对称Y型裂纹扩展规律的试验研究[J]. , 2017, 38(8): 2175-2181.
[4] 岳中文,郭 洋,王 煦,杨惠斌,韩途鲜. 空孔形状对岩石定向断裂爆破影响规律的研究[J]. , 2016, 37(2): 376-382.
[5] 宋义敏,何爱军,王泽军,陈浩哲. 冲击载荷作用下岩石动态断裂试验研究[J]. , 2015, 36(4): 965-970.
[6] 苟小平 ,杨井瑞 ,王启智 . 基于P-CCNBD试样的岩石动态断裂韧度测试方法[J]. , 2013, 34(9): 2449-2459.
[7] 黄 达,金华辉,黄润秋. 拉剪应力状态下岩体裂隙扩展的断裂力学机制及物理模型试验[J]. , 2011, 32(4): 997-1002.
[8] 谢其泰 ,郭俊志 ,王建力 ,陈于高. 单轴压缩下含倾斜单裂纹砂岩试件裂纹扩展量测研究[J]. , 2011, 32(10): 2917-2922.
[9] 李 清 ,张 茜 ,李晟源 ,谢建文 ,孟宁宁. 爆炸应力波作用下分支裂纹动态力学特性试验[J]. , 2011, 32(10): 3026-3032.
[10] 刘彩平,鞠 杨,段庆全. 岩石材料内部特征尺度对裂纹扩展机制的影响[J]. , 2010, 31(S1): 91-95.
[11] 岳中文,杨仁树,郭东明,曹 辉,董聚才. 爆炸应力波作用下缺陷介质裂纹扩展的动态分析[J]. , 2009, 30(4): 949-954.
[12] 谢其泰,王建力. 石材亚临界裂纹扩展量测研究[J]. , 2006, 27(S2): 621-626.
[13] 吴 亮,卢文波. 预裂爆破作用下岩石裂纹动态应力强度因子分析[J]. , 2006, 27(S2): 791-794.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!