›› 2018, Vol. 39 ›› Issue (4): 1525-1534.doi: 10.16285/j.rsm.2016.1237

• 数值分析 • 上一篇    下一篇

砂土液化大变形模型在FLAC3D中的开发与应用

邹佑学1, 2,王 睿1, 2,张建民1, 2   

  1. 1. 清华大学 水沙科学与水利水电工程国家重点实验室,北京 100084;2. 清华大学 土木水利学院,北京 100084
  • 收稿日期:2016-05-31 出版日期:2018-04-11 发布日期:2018-06-06
  • 通讯作者: 张建民,男,1960年生,博士,教授,主要从事岩土工程方面的教学和研究工作。E-mail: zhangjm@tsinghua.edu.cn E-mail: zouyx09@mails.tsinghua.edu.cn
  • 作者简介:邹佑学,男,1974年生,博士研究生,主要从事岩土工程抗震方面的研究工作。
  • 基金资助:

    国家自然科学基金资助项目(No. 51678346,No. 51708332)。

Implementation of a plasticity model for large post-liquefaction deformation of sand in FLAC3D

ZOU You-xue1, 2, WANG Rui1, 2, ZHANG Jian-min1, 2   

  1. 1. State Key Laboratory of Hydroscience and Engineering, Tsinghua University, Beijing 100084, China; 2. School of Civil Engineering, Tsinghua University, Beijing 100084, China
  • Received:2016-05-31 Online:2018-04-11 Published:2018-06-06
  • Supported by:

    This work was supported by the National Natural Science Foundation of China (51678346, 51708332).

摘要: 通过FLAC3D二次开发平台,在VC++环境下实现了基于砂土液化大变形机制的变动映射中心边界面弹塑性模型的二次开发。基于饱和砂土液化大变形本构理论,该模型符合三维应力空间边界面映射规则,并引入临界状态变量,可实现对不同密度和围压状态下砂土液化大变形分析。针对FLAC3D程序混合离散技术与数据调用模式和模型的体积相容性条件,测试分析了将模型采用不同植入方案的计算稳定性,开发了在FLAC3D混合离散技术下不同子区共享映射中心,进入与离开液化状态保持同步的开发方案,并给出模型开发的关键技术与实施方法。利用开发的模型,对饱和砂土开展了不排水/排水/循环三轴试验与不排水循环扭剪试验模拟,及三维地基的动力反应分析。计算结果表明,模型及所开发程序具有很好的模拟与分析砂土液化后大变形的能力。

关键词: 液化变形, 弹塑性本构模型, FLAC3D, 二次开发

Abstract: The purpose of the study is to improve the simulation of liquefaction of sands and variations in effective stress when using FLAC3D for the dynamic analysis of liquefiable ground and structures. Based on the physics of large post-liquefaction deformation of sand, a bounding surface plasticity model with appropriate mapping rules for plasticity and dilatancy in three-dimensional stress space is developed. A state parameter for compatibility with critical state soil mechanics enables the simulation of sand at various densities and confining pressures with a same set of parameters. According to requirements and procedures of user-defined-model (UDM), the plasticity model is successfully implemented into FLAC3D code in Visual C++ environment. After testing the calculation stability, the implemented schematics allow subzones of the mixed discretization process in FLAC3D share mapping center and simultaneously enter and leave liquefaction status. Using the program, undrained and drained triaxial tests, cyclic triaxial tests, undrained cyclic torsional tests are simulated and a three-dimensional site dynamic response analysis is also performed. The results show that the model and the implemented program have superior and reasonable capability to simulate small and large deformation in pre- to post-liquefaction phase of sand.

Key words: post-liquefaction deformation, elastic-plastic constitutive model, FLAC3D, further development

中图分类号: 

  • TU 441

[1] 李潇旋, 李涛, 彭丽云, . 控制吸力循环荷载下非饱和黏性土 的弹塑性双面模型[J]. 岩土力学, 2020, 41(2): 552-560.
[2] 杨文波, 邹涛, 涂玖林, 谷笑旭, 刘雨辰, 晏启祥, 何川. 高速列车振动荷载作用下马蹄形断面隧 道动力响应特性分析[J]. 岩土力学, 2019, 40(9): 3635-3644.
[3] 刘斯宏, 沈超敏, 毛航宇, 孙 屹. 堆石料状态相关弹塑性本构模型[J]. 岩土力学, 2019, 40(8): 2891-2898.
[4] 穆锐, 浦少云, 黄质宏, 李永辉, 郑培鑫, 刘 旸, 刘 泽, 郑红超, . 土岩组合岩体中抗拔桩极限承载力的确定[J]. 岩土力学, 2019, 40(7): 2825-2837.
[5] 邹佑学, 王睿, 张建民, . 可液化场地碎石桩复合地基地震动力响应分析[J]. 岩土力学, 2019, 40(6): 2443-2455.
[6] 杨秀荣,姜谙男,江宗斌. 含水状态下软岩蠕变试验及损伤模型研究[J]. , 2018, 39(S1): 167-174.
[7] 刘 建,赵国彦,梁伟章,吴 浩,彭府华,. 非均匀岩石介质单轴压缩强度及变形破裂规律的数值模拟[J]. , 2018, 39(S1): 505-512.
[8] 姚志华,连 杰,陈正汉,朱元青,方祥位,. 考虑细观结构演化的非饱和Q3 原状黄土弹塑性本构模型[J]. , 2018, 39(5): 1553-1563.
[9] 刘飞跃,杨天鸿,张鹏海,周靖人,邓文学,侯宪港,赵永川, . 基于声发射的岩石破裂应力场动态反演[J]. , 2018, 39(4): 1517-1524.
[10] 蒋 毅,魏思宇,尚彦军,高 强,李严严,. 深部复合地层力学性质研究[J]. , 2017, 38(S2): 266-272.
[11] 马春景,姜谙男,江宗斌,王善勇,. 基于单元状态指标的盾构隧道水-力耦合模拟分析[J]. , 2017, 38(6): 1762-1770.
[12] 费 康,刘汉龙,孔纲强,吴宏伟,. 热力耦合边界面模型在COMSOL中的开发应用[J]. , 2017, 38(6): 1819-1826.
[13] 蔡国庆,郭艳鑫,李 舰,张雪东,赵成刚,. 热-水-力耦合作用下非饱和土变形特性的弹塑性模拟[J]. , 2017, 38(4): 1060-1068.
[14] 柯锦福,吴爱祥,. 基于半隐式积分方案统一强度理论 ANSYS二次开发[J]. , 2017, 38(10): 3048-3052.
[15] 姚文娟,蔡晨雨. 一种新的超长桩荷载传递模型[J]. , 2016, 37(S2): 783-787.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!