›› 2018, Vol. 39 ›› Issue (6): 2017-2024.doi: 10.16285/j.rsm.2016.1924

• 基础理论与实验研究 • 上一篇    下一篇

峰后围压卸载对原煤变形和渗透特性的影响

刘 超1, 2, 3,张东明1, 2, 3,尚德磊1, 2, 3,赵宏刚1, 2, 3,宋真龙1, 2, 3,俞 欢1, 2, 3   

  1. 1. 重庆大学 煤矿灾害动力学与控制国家重点实验室,重庆 400030;2. 重庆大学 资源及环境科学学院,重庆 400030; 3. 重庆大学 复杂煤气层瓦斯抽采国家地方联合工程实验室,重庆 400030
  • 收稿日期:2016-10-31 出版日期:2018-06-11 发布日期:2018-07-03
  • 通讯作者: 张东明,男,1973年生,博士,教授,博士生导师,主要从事煤矿安全与岩土工程方面的教学与研究工作。E-mail: zhangdm@cqu.edu.cn E-mail:1712594246@qq.com
  • 作者简介:刘超,男,1990年生,博士研究生,主要从事矿山岩石力学、煤矿灾害动力学与控制方面的研究。
  • 基金资助:

    国家自然科学基金(No.51434003,No.51374256)

Influence of confining pressure unloading at post-peak on deformation and permeability characteristics of raw coal

LIU Chao1, 2, 3, ZHANG Dong-ming1, 2, 3, SHANG De-lei1, 2, 3, ZHAO Hong-gang 1, 2, 3, SONG Zhen-long1, 2, 3, YU Huan1, 2, 3   

  1. 1. State Key Laboratory of Coal Mine Disaster Dynamics and Control, Chongqing University, Chongqing 400030, China; 2. College of Resources and Environmental Sciences, Chongqing University, Chongqing 400030, China; 3. State and Local Joint Engineering Laboratory of Methane Drainage in Complex Coal Gas Seam, Chongqing 400030, China
  • Received:2016-10-31 Online:2018-06-11 Published:2018-07-03
  • Supported by:

    This work was supported by the National Natural Science Foundation of China (51434003, 51374256).

摘要: 运用自主研制的煤岩热-流-固耦合试验系统,以原煤为研究对象,进行峰后轴压保持在不同应力水平下围压的卸载试验,以分析围压卸载对原煤变形特性和渗透特性的影响。研究结果表明:通过径向应变 、轴向应变 和体应变 的不可恢复变形量以及三者在力加载过程中的响应程度来定义损伤变量,满足损伤变量的变化区间[0, 1],并以此计算煤样在卸载过程中的损伤量,得到在峰后轴压 保持不变,对围压 进行卸载时,损伤量D随着 的减小而增大,煤样的损伤程度越来越大;当轴压卸荷到不同应力时,煤样的渗透率随围压卸载次数的增加而增大,表明当 减小时, 对渗透率的影响越来越重要,同时煤样内部的孔隙裂隙以发育、扩展、延伸为主。此外,渗透率k在 卸载初期,几乎不增加;当 继续卸载时, 开始增大,并且斜率越来越大,表明煤样的损伤加剧。当保持 不变,对 进行卸载时,相当于摩尔应力圆半径增大,煤样向破坏的趋势发展,发生二次破坏的可能性增大。随着 的卸载,卸围压前 越大,摩尔应力圆半径越大,煤样的承载能力就越弱,更易发生煤样的二次破坏,表现在煤样的轴向应变 和径向应变 发生突变。

关键词: 围压卸载, 损伤, 损伤变量表达式, 渗透率, 摩尔应力圆, 二次破坏

Abstract: In this study, experiments were conducted on raw coal specimens by using the self-developed triaxial servo-controlled seepage equipment for thermo-hydro-mechanical coupling of coal containing methane. Experiments were carried out when the axial pressure maintained at different stress levels but the confining pressure was unloaded. We studied the effects of unloading confining pressure on deformation properties and permeability characteristics of gas-filled coal at the post-peak. The results showed that the damage variable was defined by the unrecoverable deformations of radial strain , axial strain and volumetric strain and the response of these three parameters during the process of unloading. The interval [0, 1] of damage variable was satisfied to calculate the damage quantity of coal specimen in the process of unloading. When the axial pressure remained constant and the confining pressure was unloaded, the amount of damage quantity D increased with the decrease of and the damage degree of coal specimen increased greatly. When unloading the axial pressure to different stress levels, the permeability of coal specimen increased with the growing unloading times of confining pressure. It indicated that the influence of confining pressure on permeability was more and more important when decreased. At the same time, the pores and fractures in the coal specimen were developed, expanded and extended. In addition, the permeability k hardly increased at the beginning of unloading . As continued to unload, k began to increase and the slope became growing, indicating the severe damage of coal specimen. The radius of Mohr stress circle was equivalent to an increase under this stress path of loading and unloading, and coal specimens tended to destruction causing the increasing possibility of the occurrence of secondary failure. At the higher level of , with the unloading of , the radius of Mohr stress circle increased and the supportability of coal specimens became weaker. Hence, the secondary failure easily occurred, which manifested the abrupt change of axial strain and radial strain .

Key words: confining pressure unloading, damage, damage variable expression, permeability, Mohr stress circle, secondary failure

中图分类号: 

  • TD 712

[1] 张艳博, 吴文瑞, 姚旭龙, 梁鹏, 田宝柱, 黄艳利, 梁精龙, . 单轴压缩下花岗岩声发射、红外特征及 损伤演化试验研究[J]. 岩土力学, 2020, 41(S1): 139-146.
[2] 叶阳, 曾亚武, 杜欣, 孙翰卿, 陈曦, . 球形砾石碰撞损伤破碎三维离散元模拟研究[J]. 岩土力学, 2020, 41(S1): 368-378.
[3] 杨艳霜, 周辉, 梅松华, 张占荣, 李金兰. 高地应力硬脆性围岩开挖损伤区时效性扩展案例分析——特征与机制[J]. 岩土力学, 2020, 41(4): 1357-1365.
[4] 王青元, 刘杰, 王培涛, 刘飞, . 冲击扰动诱发蠕变岩石加速失稳破坏试验[J]. 岩土力学, 2020, 41(3): 781-788.
[5] 侯会明, 胡大伟, 周辉, 卢景景, 吕涛, 张帆. 考虑开挖损伤的高放废物地质处置库温度-渗流-应力耦合数值模拟方法[J]. 岩土力学, 2020, 41(3): 1056-1064.
[6] 李康, 王威, 杨典森, 陈卫忠, 亓宪寅, 谭彩. 周期振荡法在低渗透测量中的应用研究[J]. 岩土力学, 2020, 41(3): 1086-1094.
[7] 陈卫忠, 李翻翻, 雷江, 于洪丹, 马永尚, . 热−水−力耦合条件下黏土岩蠕变特性研究[J]. 岩土力学, 2020, 41(2): 379-388.
[8] 张峰瑞, 姜谙男, 杨秀荣, 申发义. 冻融循环下花岗岩剪切蠕变试验与模型研究[J]. 岩土力学, 2020, 41(2): 509-519.
[9] 梁珂, 陈国兴, 刘抗, 王彦臻, . 饱和珊瑚砂最大动剪切模量的 循环加载衰退特性及预测模型[J]. 岩土力学, 2020, 41(2): 601-611.
[10] 杨福见, 胡大伟, 田振保, 周辉, 卢景景, 罗宇杰, 桂树强, . 高静水压力压实作用下疏松砂岩渗透 特性演化及其机制[J]. 岩土力学, 2020, 41(1): 67-77.
[11] 李翻翻, 陈卫忠, 雷江, 于洪丹, 马永尚, . 基于塑性损伤的黏土岩力学特性研究[J]. 岩土力学, 2020, 41(1): 132-140.
[12] 宋勇军, 杨慧敏, 张磊涛, 任建喜. 冻结红砂岩单轴损伤破坏CT实时试验研究[J]. 岩土力学, 2019, 40(S1): 152-160.
[13] 范运辉, 朱其志, 倪涛, 张坤, 张振南, . 基于弹性张量离散化的脆延转变本构模型研究[J]. 岩土力学, 2019, 40(S1): 181-188.
[14] 丁长栋, 张杨, 杨向同, 胡大伟, 周辉, 卢景景, . 致密砂岩高围压和高孔隙水压下渗透率 演化规律及微观机制[J]. 岩土力学, 2019, 40(9): 3300-3308.
[15] 李杰林, 朱龙胤, 周科平, 刘汉文, 曹善鹏, . 冻融作用下砂岩孔隙结构损伤特征研究[J]. 岩土力学, 2019, 40(9): 3524-3532.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!