›› 2018, Vol. 39 ›› Issue (11): 4102-4108.doi: 10.16285/j.rsm.2017.2403

• 基础理论与实验研究 • 上一篇    下一篇

砂土充填大理岩节理的剪切强度经验公式

焦 峰1,郭保华1, 2,翟明磊1   

  1. 1. 河南理工大学 能源科学与工程学院,河南 焦作454000;2. 河南理工大学 煤炭安全生产河南省协同创新中心,河南 焦作454000
  • 收稿日期:2017-12-04 出版日期:2018-11-10 发布日期:2018-11-15
  • 通讯作者: 郭保华,男,1979年生,博士,副教授,主要从事岩石裂隙变形与渗流方面的研究工作。E-mail:guobaohua@139.com E-mail:jfeng26@163.com
  • 作者简介:焦峰,男,1991年生,硕士研究生,主要从事充填节理剪切方面的学习与研究工作。
  • 基金资助:
    国家自然科学基金项目(No. 51109076)

Empirical formula for shear strength of marble joints infilled with sands

JIAO Feng1, GUO Bao-hua1, 2, ZHAI Ming-lei1   

  1. 1. School of Energy Science and Engineering, Henan Polytechnic University, Jiaozuo, Henan 454000, China; 2. The Collaborative Innovation Center of Coal Safety Production of Henan Province, Henan Polytechnic University, Jiaozuo, Henan 454000, China
  • Received:2017-12-04 Online:2018-11-10 Published:2018-11-15
  • Supported by:
    This work was supported by the National Natural Science Foundation of China (51109076).

摘要: 为研究砂土充填对节理抗剪强度的影响,利用GCTS(RDS?200型)岩石剪切测试系统对4种不同摩擦系数砂土充填的粉晶大理岩节理进行了直剪试验。结果表明:相同法向应力下,未充填节理的峰值剪切应力大于充填节理的峰值剪切应力,说明砂土的存在降低了节理的剪切强度;由节理面三维形貌参数最大谷深 表征节理面粗糙程度,得到了未充填节理的峰值剪切强度公式,公式预测值与试验值基本吻合;得到了用充填砂土摩擦系数表达的充填节理峰值剪切强度公式,公式预测值与试验值较为吻合。研究结论对充填节理岩体稳定性评价具有一定指导意义。

关键词: 岩石力学, 充填节理, 直剪试验, 三维形貌参数, 强度经验公式

Abstract: To investigate the effect of sandy fillings on the shear strength of rock joints, direct shear tests were conducted on single-joint fine-grained marble specimens infilled with four types of sands with different frictional coefficients. The results show that the peak shear stress of unfilled marble joints was greater than those of infilled marble joints under a same normal stress. It is indicated that the existence of sandy fillings reduced the shear strength of rock joints. A new empirical formula for the shear strength of the unfilled joints was proposed, expressed by the three-dimensional roughness parameter of maximum valley depth of the joint surfaces, and its calculated shear strength of the unfilled joints roughly coincided with their test values. An empirical formula of peak shear strength for infilled fine-grained marble joints was also obtained, expressed by the friction coefficients of infilled sands. the predicted shear strength of infilled rock joints was in accordance with the test values. Above conclusions have some helps to evaluate the stability of infilled jointed rock mass in rock engineering.

Key words: rock mechanics, infilled joint, direct shear test, 3D morphology parameter, strength empirical formula

中图分类号: 

  • TU 451

[1] 黄巍, 肖维民, 田梦婷, 张林浩, . 不规则柱状节理岩体力学特性模型试验研究[J]. 岩土力学, 2020, 41(7): 2349-2359.
[2] 金俊超, 佘成学, 尚朋阳. 基于Hoek-Brown准则的岩石应变软化模型研究[J]. 岩土力学, 2020, 41(3): 939-951.
[3] 马秋峰, 秦跃平, 周天白, 杨小彬. 岩石剪切断裂面接触算法的开发与应用[J]. 岩土力学, 2020, 41(3): 1074-1085.
[4] 张艳博, 孙林, 姚旭龙, 梁鹏, 田宝柱, 刘祥鑫, . 花岗岩破裂过程声发射关键信号时 频特征试验研究[J]. 岩土力学, 2020, 41(1): 157-165.
[5] 柴 维, 龙志林, 旷杜敏, 陈佳敏, 闫超萍. 直剪剪切速率对钙质砂强度及变形特征的影响[J]. 岩土力学, 2019, 40(S1): 359-366.
[6] 大久保诚介, 汤 杨, 许江, 彭守建, 陈灿灿, 严召松, . 3D-DIC系统在岩石力学试验中的应用[J]. 岩土力学, 2019, 40(8): 3263-3273.
[7] 张艳博, 梁鹏, 孙林, 田宝柱, 姚旭龙, 刘祥鑫, . 单轴压缩下饱水花岗岩破裂过程声发射 频谱特征试验研究[J]. 岩土力学, 2019, 40(7): 2497-2506.
[8] 马秋峰, 秦跃平, 周天白, 杨小彬. 多孔隙岩石加卸载力学特性及本构模型研究[J]. 岩土力学, 2019, 40(7): 2673-2685.
[9] 田军, 卢高明, 冯夏庭, 李元辉, 张希巍. 主要造岩矿物微波敏感性试验研究[J]. 岩土力学, 2019, 40(6): 2066-2074.
[10] 金俊超, 佘成学, 尚朋阳. 基于应变软化指标的岩石非线性蠕变模型[J]. 岩土力学, 2019, 40(6): 2239-2246.
[11] 李文轩, 卞士海, 李国英, 吴俊杰, . 粗粒料接触面模型及其在土石坝工程中的应用[J]. 岩土力学, 2019, 40(6): 2379-2388.
[12] 陈国庆, 唐 鹏, 李光明, 张广泽, 王 栋, . 岩桥直剪试验声发射频谱特征及主破裂前兆分析[J]. 岩土力学, 2019, 40(5): 1649-1656.
[13] 苏国韶, 燕思周, 闫召富, 翟少彬, 燕柳斌, . 真三轴加载条件下岩爆过程的声发射演化特征[J]. 岩土力学, 2019, 40(5): 1673-1682.
[14] 王 宇, 艾 芊, 李建林, 邓华锋, . 考虑不同影响因素的砂岩损伤特征 及其卸荷破坏细观特性研究[J]. 岩土力学, 2019, 40(4): 1341-1350.
[15] 李晓照, 戚承志, 邵珠山, 屈小磊, . 基于细观力学脆性岩石剪切特性演化模型研究[J]. 岩土力学, 2019, 40(4): 1358-1367.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!