钙质砂与钢界面循环剪切刚度与阻尼比的试验研究

doi:10.16285/j.rsm.2018.2129

岩土力学 ›› 2020, Vol. 41 ›› Issue (1): 78-86.doi: 10.16285/j.rsm.2018.2129

钙质砂与钢界面循环剪切刚度与阻尼比的试验研究

芮圣洁^{1, 2}，国振^{1, 2}，王立忠^{1, 2}，周文杰^{1, 2}，李雨杰^{1, 2}

1. 浙江大学建筑工程学院，浙江杭州 310058；2. 浙江大学浙江省海洋岩土工程与材料重点试验室，浙江杭州 310058

收稿日期:2018-11-21 修回日期:2019-05-06 出版日期:2020-01-13 发布日期:2020-01-05
通讯作者: 国振，男，1982年生，博士，副教授，主要从事海洋岩土工程方面的研究工作。E-mail: nehzoug@163.com E-mail:ruishengjie@zju.edu.cn
作者简介:芮圣洁，男，1994年生，博士研究生，主要从事钙质砂力学特性的研究工作。
基金资助:
工业与信息化部高技术船舶项目（[2016]22）；国家自然科学基金项目（No.51779220）；浙江省自然科学基金项目（No.LHZ19E090003）；浙江省重点研发项目（No.2018C03031）；中央高校基本科研业务费（No.2019QNA4038）。

Experimental study of cyclic shear stiffness and damping ratio of carbonate sand-steel interface

RUI Sheng-jie^{1, 2}, GUO Zhen^{1, 2}, WANG Li-zhong^{1, 2}, ZHOU Wen-jie^{1, 2}, LI Yu-jie^{1, 2}

1. College of Civil Engineering and Architecture, Zhejiang University, Hangzhou, Zhejiang 310058, China; 2. Key Laboratory of Offshore Geotechnics and Material of Zhejiang Province, Zhejiang University, Hangzhou, Zhejiang 310058, China

Received:2018-11-21 Revised:2019-05-06 Online:2020-01-13 Published:2020-01-05
About author:First author: RUI Sheng-jie, male, (1994-),PhD candidate, mainly engaged in the research work of carbonate sands characteristics. E-mail: ruishengjie@zju.edu.cn Corresponding author: GUO Zhen, male, (1982-), PhD, associate Professor, mainly engaged in the research work of offshore geotechnics。E-mail: nehzoug@163.com
Supported by:
This work was supported by the Ministry of Industry and Information Technology with the Research Project in the Fields of High-tech Ships ([2016]22), the National Natural Science Foundation of China (51779220), Zhejiang Provincial Natural Science Foundation of China (LHZ19E090003), the Key Research and Development Program of Zhejiang Province (2018C03031) and the Fundamental Research Funds for the Central Universities (2019QNA4038).

摘要/Abstract

摘要： 钙质砂与钢界面的动力响应对岛礁地质条件下结构物基础的安全与稳定具有重要意义。基于界面环剪仪，开展了一系列钙质砂?钢界面循环剪切试验，探究了法向应力、剪切位移幅值和粒径大小对界面剪切刚度和阻尼比的影响，并与石英砂进行了对比。研究结果表明：法向应力和剪切位移幅值对界面剪切刚度和阻尼比起控制作用；法向应力的增大导致界面剪切刚度增大、阻尼比降低；剪切位移幅值的增大，则导致剪切刚度近似呈反比降低，而阻尼比近似呈对数增大；对于均一粒径的钙质砂，存在着分界粒径，使其剪切刚度和阻尼比的变化规律呈现显著区别；石英砂粒径较大时，其界面剪切刚度和阻尼比与钙质砂明显不同，而粒径较小时两类砂表现出类似的剪切刚度和阻尼比特性。

关键词: 钙质砂, 钢界面, 循环剪切, 剪切刚度, 阻尼比

Abstract: The dynamic response of carbonate sand-steel interface is of great significance to the safety and stability of foundations in reef islands. Based on the interface ring shear apparatus, a series of cyclic shear tests on the interface between carbonate sand and steel was carried out. The effects of normal stress, cyclic amplitude and particle size on the interface shear stiffness and damping ratio were investigated, and compared with quartz sand. The results show that normal stress and cyclic amplitude have significant effects on the interface shear stiffness and damping ratio; the increase of normal stress level increases the shear stiffness and decreases the damping ratio; the increase of cyclic amplitude leads to an approximate inverse reduction of shear stiffness and an approximate logarithmic increase of damping ratio; for carbonate sand with a uniform particle size, a critical particle size exists that results in a significantly different interface shear behavior. When the particle size of quartz sands is large, the shear stiffness and damping ratio are different from those of carbonate sands. But, if the particle size is small, the shear stiffness and damping ratio of these two sands are almost the same.

Key words: carbonate sand, steel interface, cyclic shear, shear stiffness, damping ratio

中图分类号:

TU 411

芮圣洁, 国振, 王立忠, 周文杰, 李雨杰, . 钙质砂与钢界面循环剪切刚度与阻尼比的试验研究[J]. 岩土力学, 2020, 41(1): 78-86.

RUI Sheng-jie, GUO Zhen, WANG Li-zhong, ZHOU Wen-jie, LI Yu-jie, . Experimental study of cyclic shear stiffness and damping ratio of carbonate sand-steel interface[J]. Rock and Soil Mechanics, 2020, 41(1): 78-86.

参考文献

相关文章 15

[1]	蒋长宝, 魏财, 段敏克, 陈昱霏, 余塘, 李政科, . 饱水和天然状态下页岩滞后效应及阻尼特性研究[J]. 岩土力学, 2020, 41(6): 1799-1808.
[2]	孙静, 公茂盛, 熊宏强, 甘霖睿, . 冻融循环对粉砂土动力特性影响的试验研究[J]. 岩土力学, 2020, 41(3): 747-754.
[3]	闫超萍, 龙志林, 周益春, 旷杜敏, 陈佳敏, . 钙质砂剪切特性的围压效应和粒径效应研究[J]. 岩土力学, 2020, 41(2): 581-591.
[4]	梁珂, 何杨, 陈国兴, . 南沙珊瑚砂的动剪切模量和阻尼比特性试验研究[J]. 岩土力学, 2020, 41(1): 23-31.
[5]	张晨阳, 谌民, 胡明鉴, 王新志, 唐健健, . 细颗粒组分含量对钙质砂抗剪强度的影响[J]. 岩土力学, 2019, 40(S1): 195-202.
[6]	柴维, 龙志林, 旷杜敏, 陈佳敏, 闫超萍. 直剪剪切速率对钙质砂强度及变形特征的影响[J]. 岩土力学, 2019, 40(S1): 359-366.
[7]	胡明鉴, 崔翔, 王新志, 刘海峰, 杜韦, . 细颗粒对钙质砂渗透性的影响试验研究[J]. 岩土力学, 2019, 40(8): 2925-2930.
[8]	彭宇, 丁选明, 肖杨, 楚剑, 邓玮婷, . 基于染色标定与图像颗粒分割的钙质砂颗粒破碎特性研究[J]. 岩土力学, 2019, 40(7): 2663-2672.
[9]	谌民, 张涛, 单华刚, 王新志, 孟庆山, 余克服, . 钙质砂压缩波速与物理性质参数关系研究[J]. 岩土力学, 2019, 40(6): 2275-2283.
[10]	许江, 瞿佳美, 刘义鑫, 彭守建, 王威, 吴善康, . 循环剪切荷载作用下充填物对结构面剪切特性影响试验研究[J]. 岩土力学, 2019, 40(5): 1627-1637.
[11]	李书兆, 王忠畅, 贾旭, 贺林林, . 软黏土中张紧式吸力锚循环承载力简化计算方法[J]. 岩土力学, 2019, 40(5): 1704-1712.
[12]	曹梦, 叶剑红, . 中国南海钙质砂蠕变-应力-时间四参数数学模型[J]. 岩土力学, 2019, 40(5): 1771-1777.
[13]	王胤, 周令新, 杨庆. 基于不规则钙质砂颗粒发展的拖曳力系数模型及其在细观流固耦合数值模拟中应用[J]. 岩土力学, 2019, 40(5): 2009-2015.
[14]	梁珂, 陈国兴, 何杨, 刘景儒, . 基于相关函数理论的动模量和阻尼比计算新方法[J]. 岩土力学, 2019, 40(4): 1368-1376.
[15]	周辉, 程广坦, 朱勇, 陈珺, 卢景景, 崔国建, 杨聘卿, . 大理岩规则齿形结构面剪切特性试验研究[J]. 岩土力学, 2019, 40(3): 852-860.

Metrics

Viewed

Full text

Abstract

Cited

Shared

Discussed

钙质砂与钢界面循环剪切刚度与阻尼比的试验研究

Experimental study of cyclic shear stiffness and damping ratio of carbonate sand-steel interface

PDF (Chinese)

PDF (English)

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

Metrics

本文评价

推荐阅读 0