基于MatDEM的TBM滚刀破岩机理研究

doi:10.16285/j.rsm.2019.1656

岩土力学 ›› 2020, Vol. 41 ›› Issue (S1): 337-346.doi: 10.16285/j.rsm.2019.1656

基于MatDEM的TBM滚刀破岩机理研究

薛亚东^{1, 2}，周杰^{1, 2}，赵丰³，李兴^{1, 2}

1. 同济大学岩土及地下工程教育部重点实验室，上海 200092；2. 同济大学地下建筑与工程系，上海 200092； 3. 中建丝路建设投资集团有限公司，陕西西安 710075

收稿日期:2019-09-23 修回日期:2019-12-15 出版日期:2020-06-19 发布日期:2020-06-09
作者简介:薛亚东，男，1971年生，博士，副教授，主要从事岩石力学、隧道与地下建筑工程方面的教学与研究工作。
基金资助:
上海市科学技术委员会项目（No.18DZ1205902）；国家自然科学基金项目（No.41072206）。

Rock breaking mechanism of TBM cutter based on MatDEM

XUE Ya-dong^{1, 2}, ZHOU Jie^{1, 2}, ZHAO Feng³, LI Xing^{1, 2}

1. Key Laboratory of Geotechnical and Underground Engineering of Education Ministry, Tongji University, Shanghai 200092, China; 2. Department of Geotechnical Engineering, Tongji University, Shanghai 200092, China; 3. China State Silk Road Construction Investment Group Co., Ltd., Xi'an, Shaanxi 710075, China

Received:2019-09-23 Revised:2019-12-15 Online:2020-06-19 Published:2020-06-09
Supported by:
This work was supported by Shanghai Science and Technology Committee(18DZ1205902) and the National Natural Science Foundation of China(41072206) .

摘要/Abstract

摘要： 全断面隧道掘进机（TBM）以其高效、安全、环保等诸多优势被广泛地应用于隧道工程建设中，其中滚刀破岩机理是TBM设计阶段和施工阶段的核心问题。由于岩石与滚刀相互作用时会发生断裂破碎，离散元法（DEM）成为研究滚刀破岩机理的有效手段，但采用一般离散元软件构建的模型尺寸相对较小，且多简化为二维侵入问题，尺寸效应明显。采用基于离散元法的MatDEM软件构建滚刀破岩大尺寸三维模型，模拟真实滚刀破岩过程。采用团簇单元模拟刚性滚刀，实现双滚刀在不同条件下的破岩动态过程。监测破岩过程中滚刀的受力特征，计算分析不同刀间距/贯入度比(S/P)下的滚刀受力模型和比能变化。模拟结果表明，滚刀破岩时的滚刀力是一种复杂无规律的冲击荷载，其值与滚刀切割参数、岩石性质等因素有关；贯入度和刀间距的增加导致滚刀需要更大的力来破碎岩石；对于一种岩石材料，存在最优刀间距/贯入度比值，使得破岩比能最小；MatDEM软件能较好模拟滚刀的破岩过程，与室内线性切割试验相结合，有利于深入、全面地探索滚刀破岩机理。

关键词: 全断面岩石掘进机(TBM), 破岩机理, MatDEM软件, 滚刀受力, 离散元

Abstract: The full-section tunnel-boring machine(TBM) is widely used in the tunnel construction due to many advantages include high efficiency, safety and environmental protection etc. The rock breaking mechanism of the TBM cutter is the essence deciding the design and construction of TBM. The rock will break when it interacts with the TBM cutter. The discrete element method (DEM) has become an effective means to study the rock breaking mechanism of the cutter. However, the dimension of the numerical model generated by most discrete element softwares is relatively small and the simplified two-dimensional models are always applied, which has an obvious size effect. The MatDEM software based on discrete element method is used to construct a large-scale 3D model of rock breaking cutter, thus simulating the real rock breaking process of the cutter. The clustering unit is used to simulate the rigid cutter, which can realize the dynamic process of rock breaking under different conditions using the double cutters. The forces of cutters during the rock breaking process can be monitored, and the force model of cutters and variation of specific energy (SE) under different cutters spacing/penetration ratio (S/P) are calculated and analyzed. The simulation results show that the cutting force is a complex and irregular impact load during the rock breaking process. It is related with the cutting parameters, rock properties etc. The increase in the penetration depth and the cutters spacing requires a much higher force to break the rock. For a specific rock, there is an optimal ratio of the spacing/penetration degree, making the minimum SE for rock breaking. The MatDEM software can better simulate the rock breaking process of the cutter, which matches well with the indoor linear cutting test, thus it is beneficial to comprehensively explore the rock breaking mechanism.

Key words: full-section tunnel-boring machine(TBM), rock breaking mechanism, MatDEM software, cutting force, discrete element

中图分类号:

TU452

薛亚东, 周杰, 赵丰, 李兴. 基于MatDEM的TBM滚刀破岩机理研究[J]. 岩土力学, 2020, 41(S1): 337-346.

XUE Ya-dong, ZHOU Jie, ZHAO Feng, LI Xing. Rock breaking mechanism of TBM cutter based on MatDEM[J]. Rock and Soil Mechanics, 2020, 41(S1): 337-346.

参考文献

相关文章 15

[1]	鲍宁, 魏静, 陈建峰. 桩承式路堤土拱效应三维离散元分析[J]. 岩土力学, 2020, 41(S1): 347-354.
[2]	徐东升, 黄明, 黄佛光, 陈成. 不同级配珊瑚砂水泥胶结体的破坏行为分析[J]. 岩土力学, 2020, 41(5): 1531-1539.
[3]	吴祁新, 杨仲轩. 基于应变响应包络的颗粒材料增量力学行为研究[J]. 岩土力学, 2020, 41(3): 915-922.
[4]	孙博, 杨怀德, 谷玲, 刘跃, 唐碧华, 赵桂连, 张连明. 基于UDEC颗粒模型的不确定性分析[J]. 岩土力学, 2019, 40(9): 3679-3688.
[5]	王蕴嘉, 宋二祥. 堆石料颗粒形状对堆积密度及强度影响的离散元分析[J]. 岩土力学, 2019, 40(6): 2416-2426.
[6]	陈峥, 何平, 颜杜民, 高红杰, . 考虑土拱效应的管棚合理间距计算方法[J]. 岩土力学, 2019, 40(5): 1993-2000.
[7]	赵兰浩, 芮开天, 刘勋楠. 非均匀颗粒快速线性接触检测算法[J]. 岩土力学, 2019, 40(3): 1187-1196.
[8]	顾晓强, 杨朔成, . 基于离散元数值方法的砂土小应变弹性特性探讨[J]. 岩土力学, 2019, 40(2): 785-791.
[9]	李静, 孔祥超, 宋明水, 汪勇, 王昊, 刘旭亮, . 储层岩石微观孔隙结构对岩石力学特性及裂缝扩展影响研究[J]. 岩土力学, 2019, 40(11): 4149-4156.
[10]	肖思友, 苏立君, 姜元俊, 李丞, 刘振宇, . 坡度对碎屑流冲击立式拦挡墙力学特征的影响[J]. 岩土力学, 2019, 40(11): 4341-4351.
[11]	蒋雄, 徐奴文, 周钟, 侯东奇, 李昂, 张敏, . 两河口水电站母线洞开挖过程围岩破坏机制[J]. 岩土力学, 2019, 40(1): 305-314.
[12]	申海萌, 李琦, 李霞颖, 马建力, . 川南龙马溪组页岩不同应力条件下脆性破坏特征室内实验与数值模拟研究[J]. 岩土力学, 2018, 39(S2): 254-262.
[13]	杨忠民，高永涛，吴顺川，成子桥，. 基于收敛–约束原理的大变形隧道初支更换时机优化研究[J]. , 2018, 39(S1): 395-404.
[14]	赵婷婷，冯云田，王敏，王勇，. 基于改进粗糙表面Greenwood-William 接触模型的离散元方法[J]. , 2018, 39(9): 3440-3452.
[15]	王俊，王闯，何川，胡雄玉，江英超，. 砂卵石地层土压盾构掘进掌子面稳定性室内试验与三维离散元仿真研究[J]. , 2018, 39(8): 3038-3046.

Metrics

Viewed

Full text

Abstract

Cited

Shared

Discussed

基于MatDEM的TBM滚刀破岩机理研究

Rock breaking mechanism of TBM cutter based on MatDEM

PDF (Chinese)

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

Metrics

本文评价

推荐阅读 0