›› 2011, Vol. 32 ›› Issue (S2): 568-572.

• 数值分析 • 上一篇    下一篇

基于扩展有限元的压剪复合断裂数值分析

杨 庆1, 2,王 超1   

  1. 1. 大连理工大学 岩土工程研究所,辽宁 大连 116024;2. 大连理工大学 海岸和近海工程国家重点实验室,辽宁 大连 116024
  • 收稿日期:2011-05-04 出版日期:2011-08-10 发布日期:2011-08-26
  • 作者简介:杨庆,男,1964年生,博士, 教授, 主要从事岩土工程及工程地质研究
  • 基金资助:

    国家自然科学基金(No. 50979013)

Numerical analysis of mixed mode fracture under compression-shear loading based on extended finite element method

YANG Qing1, 2, WANG Chao1   

  1. 1. Institute of Geotechnical Engineering, Dalian University of Technology, Dalian, Liaoning 116024, China; 2. State Key Laboratory of Coastal and Offshore Engineering, Dalian University of Technology, Dalian, Liaoning 116024, China
  • Received:2011-05-04 Online:2011-08-10 Published:2011-08-26

摘要: 针对岩石类材料压剪破坏,国内外学者做了大量真实岩石和模型材料的试验,并进行相应的数值模拟工作。但由于试验结果往往具有很强的离散性,且对影响试验结果的各因素缺乏系统地理论分析,加之传统常规有限元在处理裂纹这类强不连续问题时存在很大的困难,如在裂尖附近的高应力区需要剖分令人难以接受的密度的网格,同时在模拟裂纹生长时还需要对网格进行重新剖分,操作繁琐复杂,效率极低,因此,针对压剪复合断裂翼裂纹扩展规律的研究始终没有取得令人满意的成果。对原生裂纹的几何形态,主裂纹面与其间填充物的相互作用对翼裂纹起裂角的影响做了系统的理论分析,并利用扩展有限元对翼型裂纹扩展全过程进行数值模拟,与理论分析结果对比,吻合良好。相关成果为以后针对压剪复合断裂的研究提供了理论分析框架,同时对今后相关试验的开展具有理论指导作用

关键词: 扩展有限元, 复合断裂, 翼型裂纹, 常规有限元, 数值模拟

Abstract: A large number of real rock and model material experiments and numerical simulations on the mixed mode fracture under compression-shear loading had been carried out by scholars at home and abroad. However, due to the discreteness of the test results and lack of influencing factors research on the test results, also the conventional finite element method has many difficulties to deal with the strong discontinuities, such as the crack, we need to make a high density mesh on the crack tip which is the stress focus zone, also, we need to remesh as the crack grows, it is complicated and low efficiency, so, little satisfactory results on mixed mode fracture under compression-shear loading experiments were obtained. Therefore, a theoretical and numerical analysis were carried out to investigate the influence of geometric characteristics of the flaw on the initiation angles of wing cracks, the interactions between the filling materials and the surface of flaws were considered; the numerical analysis based on extended finite element method shows good agreements with theoretical analysis. The proposed method will provide a theoretical frame for the experimental analysis of mixed mode fractures under compression-shear loading experiments, and it also has a theory instruction function to the relevant experiments in the future.

Key words: extended finite elements, mixed mode fracture, wing crack, conventional finite elements, numerical simulation

中图分类号: 

  • TU 45
[1] 李翻翻, 陈卫忠, 雷江, 于洪丹, 马永尚, . 基于塑性损伤的黏土岩力学特性研究[J]. 岩土力学, 2020, 41(1): 132-140.
[2] 夏 坤, 董林, 蒲小武, 李璐, . 黄土塬地震动响应特征分析[J]. 岩土力学, 2020, 41(1): 295-304.
[3] 郭院成, 李明宇, 张艳伟, . 预应力锚杆复合土钉墙支护体系增量解析方法[J]. 岩土力学, 2019, 40(S1): 253-258.
[4] 闫国强, 殷跃平, 黄波林, 张枝华, 代贞伟, . 三峡库区巫山金鸡岭滑坡成因机制与变形特征[J]. 岩土力学, 2019, 40(S1): 329-340.
[5] 刘红岩. 宏细观缺陷对岩体力学特性及边坡稳定影响研究[J]. 岩土力学, 2019, 40(S1): 431-439.
[6] 金爱兵, 刘佳伟, 赵怡晴, 王本鑫, 孙浩, 魏余栋, . 卸荷条件下花岗岩力学特性分析[J]. 岩土力学, 2019, 40(S1): 459-467.
[7] 韩征, 粟滨, 李艳鸽, 王伟, 王卫东, 黄健陵, 陈光齐, . 基于HBP本构模型的泥石流动力过程SPH数值模拟[J]. 岩土力学, 2019, 40(S1): 477-485.
[8] 吴锦亮, 何吉, . 岩质边坡动态开挖模拟的复合单元模型[J]. 岩土力学, 2019, 40(S1): 535-540.
[9] 吴凤元, 樊赟赟, 陈剑平, 李军, . 基于不同侵蚀模型的高速崩滑碎屑 流动力过程模拟分析[J]. 岩土力学, 2019, 40(8): 3236-3246.
[10] 孙峰, 薛世峰, 逄铭玉, 唐梅荣, 张翔, 李川, . 基于连续损伤的水平井射孔-近井筒三维破裂模拟[J]. 岩土力学, 2019, 40(8): 3255-3261.
[11] 穆锐, 浦少云, 黄质宏, 李永辉, 郑培鑫, 刘 旸, 刘 泽, 郑红超, . 土岩组合岩体中抗拔桩极限承载力的确定[J]. 岩土力学, 2019, 40(7): 2825-2837.
[12] 金俊超, 佘成学, 尚朋阳. 基于应变软化指标的岩石非线性蠕变模型[J]. 岩土力学, 2019, 40(6): 2239-2246.
[13] 王翔南, 李全明, 于玉贞, 喻葭临, 吕禾, . 基于扩展有限元法对土体滑坡破坏过程的模拟[J]. 岩土力学, 2019, 40(6): 2435-2442.
[14] 张 聪, 梁经纬, 阳军生, 曹 磊, 谢亦朋, 张贵金, . 堤坝脉动注浆浆液扩散机制及应用研究[J]. 岩土力学, 2019, 40(4): 1507-1514.
[15] 严 健, 何 川, 汪 波, 蒙 伟, . 高地温对隧道岩爆发生的影响性研究[J]. 岩土力学, 2019, 40(4): 1543-1550.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
[1] 刘清秉,项 伟,张伟锋,崔德山. 离子土壤固化剂改性膨胀土的试验研究[J]. , 2009, 30(8): 2286 -2290 .
[2] 况雨春,伍开松,杨迎新,马德坤. 三牙轮钻头破岩过程计算机仿真模型[J]. , 2009, 30(S1): 235 -238 .
[3] 杜文琪,王 刚. 土工结构地震滑动位移统计分析[J]. , 2011, 32(S1): 520 -0525 .
[4] 鄢治华,刘志伟,刘厚健. 黄河阶地上某电厂高边坡参数选取及其工程治理[J]. , 2009, 30(S2): 465 -468 .
[5] 许振浩 ,李术才 ,李利平 ,侯建刚 ,隋 斌 ,石少帅. 基于层次分析法的岩溶隧道突水突泥风险评估[J]. , 2011, 32(6): 1757 -1766 .
[6] 江 权 ,冯夏庭 ,周 辉 ,赵 阳 ,徐鼎平 ,黄 可 ,江亚丽. 层间错动带的强度参数取值探讨[J]. , 2011, 32(11): 3379 -3386 .
[7] 温世清 ,刘汉龙 ,陈育民. 浆固碎石桩单桩荷载传递特性研究[J]. , 2011, 32(12): 3637 -3641 .
[8] 李顺群 ,高凌霞 ,柴寿喜. 冻土力学性质影响因素的显著性和交互作用研究[J]. , 2012, 33(4): 1173 -1177 .
[9] 钟 声 ,王川婴 ,吴立新 ,唐新建 ,王清远. 点状不良地质体钻孔雷达响应特征 ——围岩及充填效应正演分析[J]. , 2012, 33(4): 1191 -1195 .
[10] 孟 振,陈锦剑,王建华,尹振宇. 砂土中螺纹桩承载特性的模型试验研究[J]. , 2012, 33(S1): 141 -145 .