›› 2017, Vol. 38 ›› Issue (12): 3436-3444.doi: 10.16285/j.rsm.2017.12.006

• 基础理论与实验研究 • 上一篇    下一篇

面向边界面模型的切面算法扩展

杨 杰1, 2, 3,尹振宇1, 2, 3,黄宏伟1, 2,金银富3,张冬梅1, 2   

  1. 1. 同济大学 岩土及地下工程教育部重点实验室,上海 200092;2. 同济大学 地下建筑与工程系,上海 200092; 3. 南特中央理工大学,法国 南特 44300
  • 收稿日期:2015-12-14 出版日期:2017-12-11 发布日期:2018-06-05
  • 通讯作者: 尹振宇,男,1975年生,博士,教授,博士生导师,主要从事土体本构关系、地下工程等方面的研究与教学工作。E-mail: zhenyu.yin@gmail.com E-mail:doc.jie.yang@gmail.com
  • 作者简介:杨杰,男,1990年生,硕士研究生,主要从事土体本构关系及岩土工程风险分析等方面的研究工作。
  • 基金资助:

    国家自然科学基金(No.51579179,No.41372285)。

Extension of cutting plane algorithm for a bounding surface model

YANG Jie1, 2, 3, YIN Zhen-yu1, 2, 3, HUANG Hong-wei1, 2, JIN Yin-fu3, ZHANG Dong-mei1, 2   

  1. 1. Key Laboratory of Geotechnical and Underground Engineering of Ministry of Education, Tongji University, Shanghai 200092, China; 2. Department of Geotechnical Engineering, Tongji University, Shanghai 200092, China; 3. Ecole Centrale de Nantes, Nantes 44300, France
  • Received:2015-12-14 Online:2017-12-11 Published:2018-06-05
  • Supported by:

    This work was supported by the National Natural Science Foundation of China (51579179, 41372285).

摘要: 保持经典弹塑性本构模型切面算法简单高效的框架,并将其进行扩展,使之适用于边界面类模型的隐式数值计算;通过在算法中引入了确定最大容许步长概念,提出了基于自适应子步迭代的改进切面算法。以一个新改进的结构性黏土边界面模型为例,应用切面算法对其进行了数值实现,并对上海黏土室内试验进行了模拟,验证了切面算法的有效性。然后,通过应用上海黏土参数对在不同固结度下的不排水三轴剪切试验、不排水单剪试验以及不排水三轴循环加载试验和一维压缩试验进行数值计算,初步确定了切面算法的最大容许步长。最后,应用改进切面算法模拟了大步长情况下的不排水单剪试验,验证了所提出的改进算法的计算精度和稳定性。

关键词: 切面算法, 边界面模型, 弹塑性, 最大容许步长, 自适应子步迭代

Abstract: This study aims to extend the scope of cutting plane algorithm for calculating the constitutive equations in the bounding surface model. Moreover, a new algorithm should inherit the simple and efficient framework in the classical elastoplasticity model. The maximum limit of incremental step was employed to propose a modified cutting plane method by using an adaptive sub-stepping algorithm. This method was also applied to an improved bounding surface model for structured clay. Experiments were conducted on Shanghai clay to validate the bounding surface model using the modified method. The validation of the modified method was proven through obtained results. According to parameters of Shanghai clay, numerical studies were also carried out to simulate undrained triaxial tests, undrained simple shear tests, undrained triaxial cyclic tests and oedometer test, respectively. The maximum limit of the incremental step was further determined. Finally, an undrained single shear test was simulated under the large strain step condition by using the modified method. As a result, the accuracy and stability of the modified cutting plane method were verified.

Key words: cutting plane algorithm, bounding surface model, elastoplasticity, maximum limit of incremental step, adaptive sub-stepping

中图分类号: 

  • TU 443

[1] 李潇旋, 李涛, 李舰, 张涛. 循环荷载下非饱和结构性黏土的弹塑性双面模型[J]. 岩土力学, 2020, 41(4): 1153-1160.
[2] 吴祁新, 杨仲轩. 基于应变响应包络的颗粒材料增量力学行为研究[J]. 岩土力学, 2020, 41(3): 915-922.
[3] 侯会明, 胡大伟, 周辉, 卢景景, 吕涛, 张帆. 考虑开挖损伤的高放废物地质处置库温度-渗流-应力耦合数值模拟方法[J]. 岩土力学, 2020, 41(3): 1056-1064.
[4] 李潇旋, 李涛, 彭丽云, . 控制吸力循环荷载下非饱和黏性土 的弹塑性双面模型[J]. 岩土力学, 2020, 41(2): 552-560.
[5] 柯锦福, 王水林, 郑宏, 杨永涛, . 基于修正对称和反对称分解的 三维数值流形元法应用推广[J]. 岩土力学, 2020, 41(2): 695-706.
[6] 邓涛, 林聪煜, 柳志鹏, 黄明, 陈文菁, . 大位移条件下水平受荷单桩的简明弹塑性计算方法[J]. 岩土力学, 2020, 41(1): 95-102.
[7] 刘斯宏, 沈超敏, 毛航宇, 孙 屹. 堆石料状态相关弹塑性本构模型[J]. 岩土力学, 2019, 40(8): 2891-2898.
[8] 储昭飞, 刘保国, 任大瑞, 宋宇, 马强, . 软岩流变相似材料的研制及物理模型试验应用[J]. 岩土力学, 2019, 40(6): 2172-2182.
[9] 汪俊敏, 熊勇林, 杨骐莱, 桑琴扬, 黄强. 不饱和土动弹塑性本构模型研究[J]. 岩土力学, 2019, 40(6): 2323-2331.
[10] 杨骐莱, 熊勇林, 张 升, 刘干斌, 郑荣跃, 张 锋, . 考虑温度影响的软岩弹塑性本构模型[J]. 岩土力学, 2019, 40(5): 1898-1906.
[11] 张坤勇, 臧振君, 李 威, 文德宝, Charkley Frederick Nai, . 土体三维卸荷弹塑性模型及其试验验证[J]. 岩土力学, 2019, 40(4): 1313-1323.
[12] 董建勋, 刘海笑, 李 洲. 适用于砂土循环加载分析的边界面塑性模型[J]. 岩土力学, 2019, 40(2): 684-692.
[13] 丁潇, 谷拴成, 何晖, 张玉, . 单/多离层作用下锚杆受力特性分析[J]. 岩土力学, 2019, 40(11): 4299-4305.
[14] 莫品强, 高新慰, 黄子丰, 马丹阳, . 下穿隧道开挖引起的挤土桩沉降控制分析方法[J]. 岩土力学, 2019, 40(10): 3823-3832.
[15] 高源, 刘海笑, 李洲, . 适用于饱和砂土循环动力分析边界面 塑性模型的显式积分算法[J]. 岩土力学, 2019, 40(10): 3951-3958.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!