›› 2011, Vol. 32 ›› Issue (10): 2917-2922.

• 基础理论与实验研究 • 上一篇    下一篇

单轴压缩下含倾斜单裂纹砂岩试件裂纹扩展量测研究

谢其泰1,郭俊志2,王建力2,陈于高1   

  1. 1.台湾大学 地质科学系,台湾 台北10617;2.成功大学 资源工程学系,台湾 台南 70101
  • 收稿日期:2011-04-22 出版日期:2011-10-10 发布日期:2011-10-13
  • 作者简介:谢其泰,男,1973年生,博士,博士后研究员,从事防灾科技量测技术研发与应用

A study of crack propagation measurement on sandstone with a single inclined flaw under uniaxial compression

HSIEH Chi-tai1, KUO Chuh-chih2, WANG Chein-lee2, CHEN Yue-gau1   

  1. 1. Department of Geosciences, Taiwan University, Taipei, Taiwan 10617, China; 2. Department of Resources Engineering, Cheng Kung University, Tainan, Taiwan 70101, China
  • Received:2011-04-22 Online:2011-10-10 Published:2011-10-13

摘要: 选用砂岩作为试验材料,进行不同倾斜角度单预制裂纹的单轴压缩试验研究,透过裂纹扩展量测技术以及配合相关断裂准则,得到:(1) 理论与实验的裂纹起裂角随裂纹倾斜角增加而增大;(2) 透过相关断裂准则,砂岩试件在裂纹尖端产生反翼裂纹是因为剪力破坏;(3) 在单轴压缩作用下砂岩试件裂纹扩展受单裂纹的倾斜角影响,当裂纹倾斜角较小时,裂纹不易起裂;当裂纹倾斜角较大时,裂纹起裂比较容易;(4) 在单轴压缩作用下砂岩试件则受单预制裂纹的倾斜角影响,当裂纹倾斜角较小时,裂纹扩展属于非稳定扩展;当裂纹倾斜角较大时,裂纹扩展属于稳定扩展;(5) 在单轴压缩作用下砂岩试件裂纹尖端A侧与裂纹尖端 B侧的裂纹扩展平均速度随裂纹倾斜角增加而降低。

关键词: 裂纹倾斜角, 反翼裂纹, 裂纹扩展速度

Abstract: Uniaxial compression test was conducted on sandstone with a single pre-existing flaw at various inclined angles. Employing crack propagation measuring techniques and relevant fracture criteria, some conclusions are drawn as follows. (1) The crack initiation angles of the sandstone specimen obtained from both theory and experiments increased with increasing flaw inclined angle. (2) Using a fracture criterion, the appearance of a anti-wing cracks at the tip of the crack of the sandstone specimen was attributed to shear failure. (3) Under uniaxial compression, crack propagation in the sandstone specimen is influenced by the single flaw inclined angle; a small flaw inclined angle it is not easy to crack initiation, while the large flaw inclined angle, allowed easy crack initiation (4) Under uniaxial compression, crack propagation in the sandstone specimen, which was influenced by a single pre-existing flaw, was unstable when the flaw inclined angle was small; and stable when the angle was large. (5) For the sandstone specimen, the average crack propagation velocity for A and B sides of the crack tip decreases with increasing flaw inclined angle.

Key words: flaw inclined angle, anti-wing crack, crack velocity

中图分类号: 

  • TU 452
[1] 杨仁树,许 鹏,岳中文,陈 程, . 圆孔缺陷与I型运动裂纹相互作用的试验研究[J]. , 2016, 37(6): 1597-1602.
[2] 宋义敏,何爱军,王泽军,陈浩哲. 冲击载荷作用下岩石动态断裂试验研究[J]. , 2015, 36(4): 965-970.
[3] 刘彩平,鞠 杨,段庆全. 岩石材料内部特征尺度对裂纹扩展机制的影响[J]. , 2010, 31(S1): 91-95.
[4] 谢其泰,王建力. 石材亚临界裂纹扩展量测研究[J]. , 2006, 27(S2): 621-626.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
[1] 崔皓东,朱岳明. 二滩高拱坝坝基渗流场的反演分析[J]. , 2009, 30(10): 3194 -3199 .
[2] 何思明,吴 永,李新坡. 嵌岩抗拔桩作用机制研究[J]. , 2009, 30(2): 333 -337 .
[3] 刘清秉,项 伟,张伟锋,崔德山. 离子土壤固化剂改性膨胀土的试验研究[J]. , 2009, 30(8): 2286 -2290 .
[4] 杜文琪,王 刚. 土工结构地震滑动位移统计分析[J]. , 2011, 32(S1): 520 -0525 .
[5] 鄢治华,刘志伟,刘厚健. 黄河阶地上某电厂高边坡参数选取及其工程治理[J]. , 2009, 30(S2): 465 -468 .
[6] 许振浩 ,李术才 ,李利平 ,侯建刚 ,隋 斌 ,石少帅. 基于层次分析法的岩溶隧道突水突泥风险评估[J]. , 2011, 32(6): 1757 -1766 .
[7] 江 权 ,冯夏庭 ,周 辉 ,赵 阳 ,徐鼎平 ,黄 可 ,江亚丽. 层间错动带的强度参数取值探讨[J]. , 2011, 32(11): 3379 -3386 .
[8] 温世清 ,刘汉龙 ,陈育民. 浆固碎石桩单桩荷载传递特性研究[J]. , 2011, 32(12): 3637 -3641 .
[9] 李顺群 ,高凌霞 ,柴寿喜. 冻土力学性质影响因素的显著性和交互作用研究[J]. , 2012, 33(4): 1173 -1177 .
[10] 钟 声 ,王川婴 ,吴立新 ,唐新建 ,王清远. 点状不良地质体钻孔雷达响应特征 ——围岩及充填效应正演分析[J]. , 2012, 33(4): 1191 -1195 .