›› 2012, Vol. 33 ›› Issue (1): 24-30.

• 基础理论与实验研究 • 上一篇    下一篇

基于图像测量的饱和细砂排水剪切试验研究

郭 莹1, 2,王 健1   

  1. 1. 大连理工大学 建设工程学部土木工程学院 岩土工程研究所,辽宁 大连 116024; 2. 大连理工大学 海岸和近海工程国家重点试验室,辽宁 大连 116024
  • 收稿日期:2010-10-28 出版日期:2012-01-10 发布日期:2012-01-17
  • 作者简介:郭莹,女,1963年生,博士,副教授,主要从事土工试验研究、土体特性研究工作
  • 基金资助:

    国家自然科学基金重点基金资助项目(No. 50639010);国家自然科学基金青年基金资助项目(No. 50808033)

Study of drained shear tests of saturated fine sand based on digital image measuring

GUO Ying1, 2,WANG Jian1   

  1. 1. Institute of Geotechnical Engineering, School of Civil Engineering, Faculty of infrastructure Engineering, Dalian University of Technology, Dalian, Liaoning 116024, China; 2. State Key Laboratory of Coastal and Offshore Engineering, Dalian University of Technology, Dalian, Liaoning 116024, China
  • Received:2010-10-28 Online:2012-01-10 Published:2012-01-17

摘要: 将计算机数字图像测量技术应用于土工静力三轴试验的土样变形测量,实现了土样变形的非接触测量。针对南宁饱和细砂,采用干装敲击法和控制不同初始成样含水率的湿装夯实法制备松砂和密砂试样,联合采用数字图像测量技术与常规三轴变形量测方法,在不同围压下进行了固结排水剪切试验。着重探讨了成样方法、初始成样含水率、密实程度、固结围压对两种量测方法所获得的应力-应变关系与邓肯-张模型中的切线模量5参数的影响。试验结果表明:成样方法、初始成样含水率、密实程度和围压决定土样的剪切破坏形式,影响应力-应变关系;剪切破坏的形式以及剪切带位置的不同,导致图像测量和常规三轴试验获得的轴向应变和偏应力数值均存在不同程度的差异;邓肯-张模型5参数不仅受到试样的成样方法、初始成样含水率、密实程度的影响,而且受到量测方法的影响。

关键词: 图像测量, 南宁饱和细砂, 排水剪切试验, 成样方法, 切线模量参数

Abstract: By the application of computer digital image measuring technique to sample deformation measurement of soil static triaxial test, non-contact measuring of soil specimen deformation was realized. For Nanning saturated fine sand, loose and dense samples were prepared respectively by dry-rapping method and wet-tamping method controlling the different initial moisture content. Combining the digital image measuring technique with traditional triaxial deformation measuring method, consolidation drained shear tests were made under different confining pressures. The influence of sample preparation methods, initial moisture content, degree of compaction and consolidation pressure on relation of stress and strain and different of tangent modulus 5 parameters of Duncan-Chang model by means with the two measurement methods are researched. The test results show that the forms of sample shear failure are decided by the sample preparation method, initial water content, density and confining pressure; and the relations between stress and strain are affected also. There were differences of axial strain and deviator stress by image measuring and traditional triaxial cause because the different shear failure forms and the location of shear band. Duncan-Chang model 5 parameters are affected not only by the sample preparation method, initial moisture content and, density, but also by the methods of measurement.

Key words: digital image measuring, Nanning saturated fine sand, drained shear test, sample preparation method, tangent modulus parameter

中图分类号: 

  • TU 411
[1] 胡田飞, 刘建坤, 王天亮, 岳祖润, . 粉质黏土变形特性的冻融循环效应及其双屈 服面本构模型[J]. 岩土力学, 2019, 40(3): 987-997.
[2] 郭莹, 刘晓东. 成样方法对饱和粉砂不同应力路径下固结 排水剪切试验结果的影响[J]. 岩土力学, 2019, 40(10): 3783-3788.
[3] 邵龙潭,阎崇超,曾飞涛, . 土工平面应变仪压力室的改进[J]. , 2017, 38(5): 1251-1257.
[4] 高军程 ,郭 莹 ,贾金青 ,涂兵雄,. 基于数字图像测量系统的饱和细砂渐进破坏特性研究[J]. , 2016, 37(5): 1343-1350.
[5] 邵龙潭 ,郭晓霞 ,刘 港 ,刘 潇,. 数字图像测量技术在土工三轴试验中的应用[J]. , 2015, 36(S1): 669-684.
[6] 盛佳韧,武朝军,叶冠林,王建华. 上海黏土强度特性真三轴试验研究[J]. , 2013, 34(1): 47-52.
[7] 杨 超,汪 稔,孟庆山. 软土三轴剪切蠕变试验研究及模型分析[J]. , 2012, 33(S1): 105-111.
[8] 杜修力,侯世伟,路德春,程星磊. 基于数字图像测量技术的砂土剪切带分析[J]. , 2012, 33(5): 1281-1285.
[9] 孙德安,陈 波. 重塑超固结上海软土力学特性及弹塑性模拟[J]. , 2010, 31(6): 1739-1743.
[10] 姚 涛,邵龙潭. 基于图像测量技术的非饱和黄土固结变形试验研究[J]. , 2009, 30(7): 2011-2015.
[11] 董建军 ,邵龙潭 ,刘永禄 ,姚 涛 . 基于图像测量方法的非饱和压实土三轴试样变形测量[J]. , 2008, 29(6): 1618-1622.
[12] 邵龙潭 ,董建军 ,刘永禄 ,孙益振 . 基于亚像素角点检测的试样变形图像测量方法[J]. , 2008, 29(5): 1329-1333.
[13] 孙益振 ,邵龙潭 ,李根华,. 基于数字图像测量的Duncan-Chang模型参数研究[J]. , 2006, 27(8): 1335-1338.
[14] 王助贫; 邵龙潭;. 三轴试验土样的端部影响问题研究[J]. , 2003, 24(3): 363-367.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
[1] 刘小文,常立君,胡小荣. 非饱和红土基质吸力与含水率及密度关系试验研究[J]. , 2009, 30(11): 3302 -3306 .
[2] 黄建华,宋二祥. 大型锚碇基础围护工程冻结帷幕力学性态研究[J]. , 2009, 30(11): 3372 -3378 .
[3] 王观石,李长洪,陈保君,李世海. 应力波在非线性结构面介质中的传播规律[J]. , 2009, 30(12): 3747 -3752 .
[4] 王朝阳,许 强,倪万魁. 原状黄土CT试验中应力-应变关系的研究[J]. , 2010, 31(2): 387 -391 .
[5] 万少石,年廷凯,蒋景彩,栾茂田. 边坡稳定强度折减有限元分析中的若干问题讨论[J]. , 2010, 31(7): 2283 -2288 .
[6] 赵尚毅,郑颖人,李安洪,邱文平,唐晓松,徐 俊. 多排埋入式抗滑桩在武隆县政府滑坡中的应用[J]. , 2009, 30(S1): 160 -164 .
[7] 刘振平,贺怀建,朱发华. 基于钻孔数据的三维可视化快速建模技术的研究[J]. , 2009, 30(S1): 260 -266 .
[8] 赵跃堂,林家炜,石 磊. 冲击荷载作用下层裂问题研究[J]. , 2011, 32(S2): 122 -126 .
[9] 王国粹,杨 敏. 砂土中水平受荷桩非线性分析[J]. , 2011, 32(S2): 261 -267 .
[10] 袁敬强 ,陈卫忠 ,谭贤君 ,王 辉. 软弱地层注浆的细观力学模拟研究[J]. , 2011, 32(S2): 653 -659 .