›› 2013, Vol. 34 ›› Issue (4): 1211-1216.

• 测试技术 • 上一篇    

系列尺度岩石结构面相似表面模型制作的逆向控制技术研究

黄 曼1,罗战友1, 2,杜时贵1,张晓莺1   

  1. 1.绍兴文理学院 土木工程系,浙江 绍兴 312000;2.浙江科技学院 岩土工程研究所,杭州 310023
  • 收稿日期:2012-02-08 出版日期:2013-04-10 发布日期:2013-04-16
  • 通讯作者: 杜时贵,男,1962年生,博士后,教授,主要从事岩体结构面粗糙度及抗剪强度方面的研究工作。E-mail: dushigui@126.com E-mail:hmcadx@126.com
  • 作者简介:黄曼,男,1983年生,硕士研究生,讲师,主要从事岩体结构面模型试验的研究工作。
  • 基金资助:

    国家自然科学基金资助(No. 41172292,No.40672186);浙江省高校重大科技攻关项目资助(No. ZD2009008);教育部新世纪人才计划项目资助(No. NCET-11-1080);绍兴市科技计划重点项目资助(No. 2011A21058)

Study of inverse controlling technology for series scales similar surface model making of rock structural plane

HUANG Man1, LUO Zhan-you1, 2, DU Shi-gui1, ZHANG Xiao-ying1   

  1. 1. Department of Civil Engineering, Shaoxing University, Shaoxing, Zhejiang 312000, China; 2. Institute of Geotechnical Engineering, Zhejiang University of Science and Technolog, Hangzhou 310023, China
  • Received:2012-02-08 Online:2013-04-10 Published:2013-04-16

摘要: 制作与原岩结构面相似表面形态的模型试样是开展结构面力学模型试验的关键。基于不同尺度岩石结构面模型试样的制作特点,研制上、下盘完全吻合的系列尺度试样模具,并设计上、下盘吻合结构面试样的制作工艺,使得原岩结构面可以多次重复利用,提高原岩结构面的使用效率,降低取样成本和试验周期,实现在同一块结构面上不同尺度结构面模型的制作。利用表面形态相似性评价技术,验证制作工艺的可行性,结果表明,按照该逆向控制技术设计制作的模型试样,能复制出和原岩结构面表面形态一样、上、下盘结构面吻合度高的模型试样,符合制作不同尺度模型结构面的要求,可克服原岩结构面上下盘吻合度差、不能多种尺度取样的缺点,为开展具有真实表面形态的结构面抗剪强度尺寸效应试验研究提供了条件。

关键词: 岩石结构面, 逆向控制, 模型试样, 系列尺度, 表面形态, 相似性评价

Abstract: The key of structural plane model mechanical test is to make similar surface morphology model sample to the natural rock structural plane. Based on the making particularity of rock structural plane in different scales,sample modes in series scales with perfect match to upper wall and bottom wall were developed; and the making process of model sample was designed. Through this, the natural rock structural plane can be used repeatedly, which will increase the using efficiency, reduce the sample cost and trial cycle. What’s more, the different scales of structural plane model making on the same natural rock structural plane are achieved. In the second part of the work, the similar evaluation results of surface morphology show: the model sample made by inverse controlling technology is capable of duplicating the same surface morphology of rock structural plane and highly match between upper wall and bottom wall model samples, which is suitable for the demand of making model samples in different scales. The inverse controlling technology is able to overcome the problems of low match to upper wall and bottom wall model samples and unable to get samples in multiscale of natural rock structural plane, which provides conditions for experimental research on shear strength scale effect of real surface morphology rock structural plane.

Key words: rock structural plane, inverse controlling, model sample, series scales, surface morphology, similarity evaluation

中图分类号: 

  • TU 452
[1] 宋磊博,江 权,李元辉,杨成祥,钟 山,张妹珠,. 不同采样间隔下结构面形貌特征和各向异性特征的统计参数稳定性研究[J]. , 2017, 38(4): 1121-1132.
[2] 宋磊博,江 权,李元辉,杨成祥,冉曙光,王百林,刘 挺,. 基于剪切行为结构面形貌特征的描述[J]. , 2017, 38(2): 525-533.
[3] 罗战友 ,杜时贵 ,黄 曼,. 岩石结构面粗糙度系数尺寸效应的推拉试验研究[J]. , 2015, 36(12): 3381-3386.
[4] 韩立军,宗义江,韩贵雷,张后全. 岩石结构面注浆加固抗剪特性试验研究[J]. , 2011, 32(9): 2570-2576.
[5] 殷黎明,杨春和,王贵宾,梅 涛. 甘肃北山花岗岩节理表面形态特性研究[J]. , 2009, 30(4): 1046-1050.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
[1] 刘小文,常立君,胡小荣. 非饱和红土基质吸力与含水率及密度关系试验研究[J]. , 2009, 30(11): 3302 -3306 .
[2] 王观石,李长洪,陈保君,李世海. 应力波在非线性结构面介质中的传播规律[J]. , 2009, 30(12): 3747 -3752 .
[3] 王朝阳,许 强,倪万魁. 原状黄土CT试验中应力-应变关系的研究[J]. , 2010, 31(2): 387 -391 .
[4] 邓 琴,郭明伟,李春光,葛修润. 基于边界元法的边坡矢量和稳定分析[J]. , 2010, 31(6): 1971 -1976 .
[5] 万少石,年廷凯,蒋景彩,栾茂田. 边坡稳定强度折减有限元分析中的若干问题讨论[J]. , 2010, 31(7): 2283 -2288 .
[6] 闫 铁,李 玮,毕雪亮. 基于分形方法的多孔介质有效应力模型研究[J]. , 2010, 31(8): 2625 -2629 .
[7] 徐维生,柴军瑞,陈兴周,孙旭曙. 岩体裂隙网络非线性非立方渗流研究与应用[J]. , 2009, 30(S1): 53 -57 .
[8] 赵尚毅,郑颖人,李安洪,邱文平,唐晓松,徐 俊. 多排埋入式抗滑桩在武隆县政府滑坡中的应用[J]. , 2009, 30(S1): 160 -164 .
[9] 刘振平,贺怀建,朱发华. 基于钻孔数据的三维可视化快速建模技术的研究[J]. , 2009, 30(S1): 260 -266 .
[10] 魏厚振,颜荣涛,韦昌富,吴二林,陈 盼,田慧会. 含天然气水合物沉积物相平衡问题研究综述[J]. , 2011, 32(8): 2287 -2294 .