基于广义SMP准则及应力路径法的柱孔扩张分析

›› 2013, Vol. 34 ›› Issue (10): 2781-2789.

基于广义SMP准则及应力路径法的柱孔扩张分析

郝冬雪¹，陈榕¹，许成顺²，刘春城¹

1.东北电力大学建筑工程学院，吉林吉林 132012；2.北京工业大学城市与工程安全减灾省部共建教育部重点实验室，北京 100124

收稿日期:2012-07-16 出版日期:2013-10-09 发布日期:2013-10-18
作者简介:郝冬雪，女，1981年生，副教授，主要从事地基承载特性、原位测试机制分析方面的研究工作。
基金资助:
国家重点基础研究发展计划(973计划)项目（No. 2011CB013603）；国家自然科学基金项目（No. 51308095，No. 51278091）；中国电机工程学会电力青年科技创新项目（No. 20110515）

Analysis of cylindrical cavity expansion based on extended SMP criterion and stress path approach

HAO Dong-xue¹, CHEN Rong¹, XU Cheng-shun², LIU Chun-cheng¹

1. School of Civil Engineering and Architecture, Northeast Dianli University, Jilin, Jilin 132012, China; 2. Key Laboratory of Urban Security and Disaster Engineering, Ministry of Education, Beijing University of Technology, Beijing 100124, China

Received:2012-07-16 Online:2013-10-09 Published:2013-10-18

摘要/Abstract

摘要： 柱孔扩张理论广泛用于旁压试验机制分析、沉桩挤土效应等岩土工程问题中。基于经典的Vesic孔扩张理论，采用能够考虑中主应力效应的广义SMP屈服准则，并结合有限应变理论对均质土体中柱孔扩张问题进行分析，根据应力路径假设提出确定塑性区平均体应变的解析步骤。通过大量变参数计算给出具有不同刚度指标、泊松比和内摩擦角的土中柱孔扩张极限状态下的塑性区平均体应变、孔扩张半径比和孔扩张系数。分析结果表明，、、越大，塑性区平均体应变越小，塑性区半径比越大，孔扩张系数越大；随着增加，的变化对孔扩张系数的影响更显著。同时，将结果与基于Mohr-Coulomb准则的孔扩张解答进行比较，探讨不同土性参数时中主应力效应对孔扩张系数的影响。文中分析方法及给出的考虑中主应力效应的柱孔扩张系数表可为原位试验分析及桩侧摩阻力估算提供参考。

关键词: 空间准滑动面理论（广义SMP）, 应力路径假设, 柱孔扩张, 孔扩张系数

Abstract: The theory of cylindrical cavity expansion has been widely used in many geotechnical engineering, such as analysis of pressure meter testing and effect of pile driving. Extended spatial mobilization plane (SMP) theory, which can display the effects of intermediate principal stress, in combination of finite strain theory, is used to analyze cylindrical cavity expansion problem in homogeneous soil. An analytical procedure to determine average volumetric strain of plastic zone is developed according to stress path hypothesis. Accordingly, “nondimensional” plastic zone radius and factors of cylindrical cavity expansion are estimated for varied rigidity index , Poisson ratio v and frictional angle . It is concluded that average volumetric strain decreases and “nondimensional” plastic zone radius and factors of cylindrical cavity expansion increase with the increase of 、、 . Variation of has significant effects on factors of cylindrical cavity expansion in the case of greater . Furthermore, a comparative study of the solutions based on extended SMP and those based on Mohr-Coulomb is made to examine the effects of intermediate principal stress on cylindrical cavity expansion for various soils. The values of factors of cylindrical cavity expansion considering the effects of intermediate principal stress presented in this paper are of great significance for analyzing in-situ tests and estimating ultimate lateral friction of piles.

Key words: extended spatial mobilization plane (SMP) theory, stress path hypothesis, cylindrical cavity expansion, factors of cavity expansion

中图分类号:

TU 323

郝冬雪，陈榕，许成顺，刘春城 . 基于广义SMP准则及应力路径法的柱孔扩张分析[J]. , 2013, 34(10): 2781-2789.

HAO Dong-xue , CHEN Rong , XU Cheng-shun , LIU Chun-cheng . Analysis of cylindrical cavity expansion based on extended SMP criterion and stress path approach[J]. , 2013, 34(10): 2781-2789.

参考文献

Metrics

Viewed

Full text

Abstract

Cited

Shared

Discussed

[1]	刘时鹏，施建勇，雷国辉，林海 . K0固结饱和土柱孔扩张问题弹塑性分析[J]. , 2013, 34(2): 389-394.
[2]	刘时鹏，施建勇，雷国辉 . 基于SMP准则柱孔扩张问题相似解[J]. , 2012, 33(5): 1375-1380.
[3]	饶平平，李镜培，张常光. 考虑各向异性、剪胀和渗流的柱孔扩张问题统一解[J]. , 2010, 31(S2): 79-85.
[4]	章定文，韩文君，刘松玉. 初始应力各向异性状态下圆柱孔扩张机制分析[J]. , 2010, 31(S2): 104-108.
[5]	章定文，刘松玉，顾沉颖. 各向异性初始应力状态下圆柱孔扩张理论弹塑性分析[J]. , 2009, 30(6): 1631-1634.
[6]	刘裕华，陈征宙，彭志军，高倚山，高鹏 . 应用圆孔柱扩张理论对预制管桩的挤土效应分析[J]. , 2007, 28(10): 2167-2172.
[7]	萧琳琛，谢新宇，曹秀娟,. 考虑土体结构性损伤的沉桩挤土效应解析分析[J]. , 2006, 27(S1): 59-64.
[8]	徐永福 , 傅德明. 结构性软土中打桩引起的超孔隙水压力[J]. , 2000, 21(1): 53-55.