弹粘塑性块体单元法在龙滩水电站右坝肩边坡稳定分析中的应用

›› 2006, Vol. 27 ›› Issue (1): 107-111.

弹粘塑性块体单元法在龙滩水电站右坝肩边坡稳定分析中的应用

郑惠峰，汪卫明，陈胜宏

武汉大学水资源与水电工程科学国家重点实验室，武汉 430072

收稿日期:2004-07-09 出版日期:2006-01-10 发布日期:2013-10-31
作者简介:郑惠峰, 男, 1981年生, 博士研究生, 研究方向为水工结构和岩土工程结构的数值模拟方法研究。
基金资助:
国家自然科学基金项目(No.50239070)；水利部科技创新项目(No.SC×2-21); 武汉大学水资源与水电工程科学国家重点实验室开放研究基金项目（2004C009）

Application of elasto-viscoplastic block element method to stability analysis of right abutment slope in Longtan Hydropower Project

ZHENG Hui-feng, WANG Wei-ming, CHEN Sheng-hong

State Key Laboratory of Water Resources and Hydropower Engineering Science, Wuhan University, Wuhan 430072, China

Received:2004-07-09 Online:2006-01-10 Published:2013-10-31

摘要/Abstract

摘要： 介绍了三维弹粘塑性块体单元法的基本原理。该方法假定岩石块体为刚体，只考虑结构面的变形和强度特性。在建立块体系统的平衡方程、结构面的变形与块体位移的几何相容方程以及结构面上的弹粘塑性本构方程的基础上，出块体系统位移与稳定的基本方程。针对龙滩水电站右坝肩边坡地质条件复杂，块体稳定问题较为突出的情况，采用块体单元法计算了边坡中典型结构面切割形成的特定块体在不同工况下的强度储备安全系数，并针对结构面的几何参数和力学参数等重要影响因素进行了敏感性分析，为工程设计提供了依据。应用表明，作为一种新型的水工结构数值方法，块体单元法应用于复杂地质条件下的岩石高边坡的稳定和变形分析具有准确、适用和简便的特点。

关键词: 弹粘塑性, 块体单元法, 边坡, 稳定性分析, 敏感性分析

Abstract: The principle of 3D elasto-viscoplastic block element method is introduced. This method exclusively takes deformation and strength property of the discontinuities into consideration, with the assumption that the rock blocks are rigid. The governing equation is deduced on the base of the equilibrium equation of block system, the compatible equation of displacement between the discontinuities and blocks and the elasto-viscoplastic constitutive equation of discontinuities. In right abutment slope of Longtan Hydropower Station, the geology is complicated, and the stability of blocks is a serious question. The 3D elasto-viscoplastic block element method is adopted to analyse the stability of the given blocks limited by the typical discontinuities, a series of safety factors of strength reservation under various work conditions are obtained. In the same time, the sensitivity analysis is performed aimed at such important factors influencing the stability of blocks as geometrical and mechanical parameters of discontinuities to provide proposals for engineering design. The application indicates that, as a new numerical method for hydraulic engineering, the elasto-viscoplastic block element method has the merits of validity, practicability and convenience for the stability and deformation analysis of block slope with complicated geology.

Key words: elasto-viscoplasticity, block element method, slope, stability analysis, sensitivity analysis

中图分类号:

TU 457 O24

郑惠峰，汪卫明，陈胜宏. 弹粘塑性块体单元法在龙滩水电站右坝肩边坡稳定分析中的应用[J]. , 2006, 27(1): 107-111.

ZHENG Hui-feng, WANG Wei-ming, CHEN Sheng-hong. Application of elasto-viscoplastic block element method to stability analysis of right abutment slope in Longtan Hydropower Project[J]. , 2006, 27(1): 107-111.

参考文献

相关文章 15

[1]	余国, 谢谟文, 孙紫豪, 刘鹏. 基于GIS的三维对称边坡滑面正应力分布逼近函数构造[J]. 岩土力学, 2019, 40(6): 2332-2340.
[2]	杨杰, 马春辉, 程琳, 吕高, 李斌, . 高陡边坡变形及其对坝体安全稳定影响研究进展[J]. 岩土力学, 2019, 40(6): 2341-2353.
[3]	吴关叶, 郑惠峰, 徐建荣. 三维复杂块体系统边坡深层加固条件下稳定性及破坏机制模型试验研究[J]. 岩土力学, 2019, 40(6): 2369-2378.
[4]	贺桂成, 廖家海, 李丰雄, 王昭, 章求才, 张志军. 水饱和边坡夹层热-孔隙水-力耦合作用模型及应用[J]. 岩土力学, 2019, 40(5): 1663-1672.
[5]	朱仁杰, 车爱兰, 严飞, 文海, 葛修润, . 含贯通性结构面岩质边坡动力演化规律[J]. 岩土力学, 2019, 40(5): 1907-1915.
[6]	余国, 谢谟文, 郑正勤, 覃事河, 杜岩, . 基于GIS的边坡稳定性计算方法研究[J]. 岩土力学, 2019, 40(4): 1397-1404.
[7]	李世俊, 马昌慧, 刘应明, 韩玉珍, 张彬, 张嘎, . 离心模型试验与数值模拟相结合研究采空边坡渐进破坏特性[J]. 岩土力学, 2019, 40(4): 1577-1583.
[8]	王珍, 曹兰柱, 王东, . 非均质边坡稳定性上限分析评价研究[J]. 岩土力学, 2019, 40(2): 737-742.
[9]	张文生, 罗强, 蒋良潍, 李昂, . 小样本岩土参数下考虑矩估计偏差的土质边坡可靠度分析[J]. 岩土力学, 2019, 40(1): 315-324.
[10]	刘素锦, 郭明伟, 李春光, . 三维边坡整体主滑方向的确定[J]. 岩土力学, 2018, 39(S2): 37-44.
[11]	刘洋洋, 郭增长, 李永强, 李有鹏. 基于熵权集对分析和车载激光扫描的公路边坡危险性评价模型[J]. 岩土力学, 2018, 39(S2): 131-141.
[12]	尹小涛，薛海斌，汤华，任兴文，宋罡,. 边坡局部和整体稳定性评价方法的辩证统一[J]. , 2018, 39(S1): 98-104.
[13]	尹小涛，严飞，秦雨樵，周磊，王东英, . 地震作用下华丽高速公路金沙江桥华坪岸顺层边坡动力稳定性评价[J]. , 2018, 39(S1): 387-394.
[14]	代仲海，胡再强，尹小涛，吴振君，. 工程荷载作用下缓倾角反倾似层状岩质边坡变形稳定性分析[J]. , 2018, 39(S1): 412-418.
[15]	张玉芳，袁坤,. 双锚固段新型锚索锚固性能研究及工程应用[J]. , 2018, 39(S1): 461-468.

Metrics

Viewed

Full text

Abstract

Cited

Shared

Discussed