›› 2004, Vol. 25 ›› Issue (2): 233-237.

• 基础理论与实验研究 • 上一篇    下一篇

CCNBD断裂韧度试样的SIF新公式和在尺度律分析中的应用

吴礼舟,贾学明,王启智   

  1. 四川大学 土木力学系,四川 成都 610065
  • 收稿日期:2002-10-08 出版日期:2004-02-10 发布日期:2014-07-15
  • 通讯作者: 王启智,男,1946年生,1968年毕业于清华大学,教授,博导,主要从事岩石力学方面的教学和研究工作 E-mail:qzw@ scu.ed.cn
  • 作者简介:吴礼舟?,男,1975年生,硕士,主要从事结构可靠度及失效分析工作
  • 基金资助:

    国家自然科学基金资助项目(No.19872046)

A new stress intensity factor formula of cracked chevron notched Brazilian disc (CCNBD) and its application to analyzing size effect

WU Li-zhou, JIA Xue-ming, WANG Qi-zhi   

  1. Dept. of Civil Eng. and Applied Mechanics, Sichuan University, Chengdu 610065, China
  • Received:2002-10-08 Online:2004-02-10 Published:2014-07-15

摘要: 根据国际岩石力学学会于1995年推荐的一种测试岩石断裂韧度的新型试样-人字形切槽巴西圆盘试样,对其断裂韧度计算公式中的关键参数即无量纲应力强度因子(SIF)提出了一个改进的计算公式。采用分片合成方法结合有限元法对CCNBD试样的应力强度因子进行了宽范围标定,结果以表格的形式给出;并采用数据线性回归的方法,将标定结果以一个指数函数的形式给出。结果表明,与标定值相比,无量纲应力强度因子新公式的误差较小,并且囊括了CCNBD试样的较宽范围的尺寸,且查表使用方便,也为理论分析提供了条件。在此基础上,对岩石断裂韧度测试的尺度律进行了更进一步的探索,结果表明,利用新公式进行的尺度律分析是有效的。

关键词: 岩石断裂韧度, 人字形切槽巴西圆盘试样(CCNBD), 应力强度因子新公式, 尺度律

Abstract: International Society for Rock Mechanics (ISRM) proposed in 1995 a new type of rock fracture toughness specimen—cracked chevron notched Brazilian disc (CCNBD); however, the calibration of the dimensionless stress intensity factor (SIF), which is an important mechanical parameter for fracture toughness calculation, is still in question. In authors previous paper, the new and more accurate wide range calibration values, listed as tables, are obtained by using a new slice synthesis method combined with finite element method. In order to guarantee the consistency of the table with ISRM, linear regression is adopted to obtain the lists of calibration with exponent function. The results show that the error of the new formula, compared with the values of calibration, is very small; and that it allows application for a wide range of specimen dimensions and further theoretical analysis. Based on this new formula of dimensionless stress intensity factor, size effect law of rock fracture toughness test is further discussed. The result of analysis with application of the new formula is proved to be reliable.

Key words: rock fracture toughness, cracked chevron notched Brazilian disc(CCNBD), new formula of dimensionless stress intensity factor, size effect law

中图分类号: 

  • TU 473
[1] 张 盛, 王龙飞, 常 旭, 王东坤, 王小良, 乔 洋, . 中心直裂纹半圆盘试样的石灰岩断裂韧度 尺寸效应试验研究[J]. 岩土力学, 2019, 40(5): 1740-1749.
[2] 薛东杰,周宏伟,任伟光,赵 彪. 北山花岗岩深部节理间距分布多重分形研究[J]. , 2016, 37(10): 2937-2944.
[3] 崔振东,刘大安,安光明,周 苗,李志清. V形切槽巴西圆盘法测定岩石断裂韧度KIC的实验研究[J]. , 2010, 31(9): 2743-2748.
[4] 张 盛,王启智. 用5种圆盘试件的劈裂试验确定岩石断裂韧度[J]. , 2009, 30(1): 12-18.
[5] 陈 刚,张洪武. 材料的率相关与梯度耦合模型的二维内尺度律研究[J]. , 2007, 28(4): 643-648.
[6] 张洪武 ,秦建敏 ,刘国震 . 基于梯度塑性模型的多孔介质应变局部化分析的基本理论[J]. , 2006, 27(1): 1-6.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
[1] 徐金明,羌培,张鹏飞. 粉质黏土图像的纹理特征分析[J]. , 2009, 30(10): 2903 -2907 .
[2] 董 诚,郑颖人,陈新颖,唐晓松. 深基坑土钉和预应力锚杆复合支护方式的探讨[J]. , 2009, 30(12): 3793 -3796 .
[3] 任 松,姜德义,杨春和,藤宏伟. 共和隧道开裂段页岩蠕变本构试验及离散元数值模拟研究[J]. , 2010, 31(2): 416 -421 .
[4] 梁桂兰,徐卫亚,谈小龙. 基于熵权的可拓理论在岩体质量评价中的应用[J]. , 2010, 31(2): 535 -540 .
[5] 马文涛. 基于灰色最小二乘支持向量机的边坡位移预测[J]. , 2010, 31(5): 1670 -1674 .
[6] 于琳琳,徐学燕,邱明国,闫自利,李鹏飞. 冻融作用对饱和粉质黏土抗剪性能的影响[J]. , 2010, 31(8): 2448 -2452 .
[7] 王协群,张有祥,邹维列,熊海帆. 降雨入渗条件下非饱和路堤变形与边坡的稳定数值模拟[J]. , 2010, 31(11): 3640 -3644 .
[8] 王 伟,刘必灯,周正华,王玉石,赵纪生. 刚度和阻尼频率相关的等效线性化方法[J]. , 2010, 31(12): 3928 -3933 .
[9] 王海波,徐 明,宋二祥. 基于硬化土模型的小应变本构模型研究[J]. , 2011, 32(1): 39 -43 .
[10] 曹光栩,宋二祥,徐 明. 山区机场高填方地基工后沉降变形简化算法[J]. , 2011, 32(S1): 1 -5 .