黏弹塑性BK-MC锚固模型二次开发及工程应用

›› 2014, Vol. 35 ›› Issue (3): 881-886.

黏弹塑性BK-MC锚固模型二次开发及工程应用

赵同彬^1,2,3，姜耀东^1,2，张玉宝³，刘姗姗³

1.中国矿业大学（北京）资源与安全工程学院，北京 100083；2.中国矿业大学（北京）煤炭资源与安全开采国家重点实验室，北京 100083； 3. 山东科技大学矿业与安全工程学院，山东青岛 266590

收稿日期:2013-01-09 出版日期:2014-03-10 发布日期:2014-03-19
作者简介:赵同彬，男，1975年生，博士，副教授，主要从事矿山岩体力学方面的研究。
基金资助:
国家自然科学基金(No.51004068)；山东省优秀中青年科学家科研奖励基金(No.BS2011NJ014)；山东省“泰山学者”建设工程专项经费资助。

Secondary development and engineering application of viscoelasto-plastic BK-MC anchorage model

ZHAO Tong-bin^1,2,3，JIANG Yao-dong^1,2，ZHANG Yu-bao³，LIU Shan-shan³

1. School of Mineral Resources and Safety Engineering, China University of Mining & Technology, Beijing 100083, China; 2. State Key Laboratory of Coal Resources and Safe Mining, China University of Mining & Technology, Beijing 100083, China; 3. College of Mining and Safety Engineering, Shandong University of Science and Technology, Qingdao, Shandong 266590, China

Received:2013-01-09 Online:2014-03-10 Published:2014-03-19

摘要/Abstract

摘要： 黏弹性Bolt-Kelvin（简称B-K）锚固模型具有较高的计算效率，但由于无法描述岩体进入塑性阶段的力学行为特性，使得该流变模型的采矿工程应用范围受到一定的限制，为此引入修正Mohr-Coulomb（简称M-C）屈服准则对B-K锚固流变模型进行改进。首先推导了黏弹塑性BK-MC锚固模型的有限差分增量迭代计算格式；然后基于FLAC3D中UDM接口程序，采用VC++语言编写了相应的计算流程，使用Microsoft Visual Studio 2010编译态链接库DLL进行加载和调用；最后通过单轴压缩试验对开发BK-MC模型进行了数值模拟验证，并应用于口孜东矿深部巷道围岩稳定性预测分析中。结果表明，模拟计算得到的巷道表面位移演化过程与现场实测结果的规律性更趋于一致，进一步验证了新模型的正确性和适用性。研究采矿工程的流变问题时，考虑岩体进入塑性阶段的力学行为特性十分必要。

关键词: 修正Mohr-Coulomb屈服准则, 黏弹塑性模型, 锚固岩体, FLAC3D二次开发

Abstract: The viscoelastic B-K anchorage model can be computed efficiently. However, this rheological model is limited in application of mining engineering because it cannot well describe the mechanical characteristics of rock mass into plastic stage. In order to improve the Bolt-Kewin (B-K) model, a new viscoelasto-plastic anchorage model called BK-MC was proposed by introducing a modified Mohr-Coulomb (M-C) yield criterion. The increment iterative calculation scheme of BK-MC model was deduced in finite differential method first. Then, based on UDM interface program of FLAC3D, the corresponding calculation process was compiled by the VC++ programming language and called by DLL of Microsoft Visual Studio 2010. Finally, the BK-MC model was verified by the numerical simulation of uniaxial compressive test and applied to the stability analysis of deep roadway’s surrounding rock in Kouzidong mining area. The results show that the simulation displacement evolution process of roadway surface tends to be uniform with the regularity of field test data, which further verifies the validity and applicability of the BK-MC model. And it is necessary to consider mechanical properties of rock into plastic stage when studying the rheological problems of mining engineering.

Key words: modified Mohr-Coulomb criterion, viscoelasto-plastic model, anchorage rock mass, secondary development of FLAC3D

中图分类号:

TB115

赵同彬，姜耀东，张玉宝，刘姗姗,. 黏弹塑性BK-MC锚固模型二次开发及工程应用[J]. , 2014, 35(3): 881-886.

ZHAO Tong-bin ，JIANG Yao-dong ，ZHANG Yu-bao ，LIU Shan-shan,. Secondary development and engineering application of viscoelasto-plastic BK-MC anchorage model[J]. , 2014, 35(3): 881-886.

参考文献

Metrics

Viewed

Full text

Abstract

Cited

Shared

Discussed

本文评价

推荐阅读 10

[1]	楚锡华，徐远杰. 基于形状改变比能对M-C准则与 D-P系列准则匹配关系的研究[J]. , 2009, 30(10): 2985 -2990 .
[2]	刘豆豆，陈卫忠，杨建平，谭贤君，周喜德. 脆性岩石卸围压强度特性试验研究[J]. , 2009, 30(9): 2588 -2594 .
[3]	王桂尧，李斌，罗军，付宏渊. 粉土基质吸力的新型量测装置与土-水特征研究[J]. , 2010, 31(11): 3678 -3682 .
[4]	卢应发，陈朱蕾，谢文良，吕志中. 垃圾卫生填埋中的一些岩土工程技术[J]. , 2009, 30(1): 91 -98 .
[5]	王志萍，胡敏云，夏玲涛. 垃圾填土压缩特性的室内试验研究[J]. , 2009, 30(6): 1681 -1686 .
[6]	贾强，应惠清，张鑫. 锚杆静压桩技术在既有建筑物增设地下空间中的应用[J]. , 2009, 30(7): 2053 -2057 .
[7]	路军富，王明年，贾媛媛，喻渝，谭忠盛. 高速铁路大断面黄土隧道二次衬砌施作时机研究[J]. , 2011, 32(3): 843 -848 .
[8]	王成华，安建国. 含扩径桩的群桩基础竖向承载性状数值分析[J]. , 2011, 32(S2): 580 -585 .
[9]	方焘，刘新荣，耿大新，罗照，纪孝团，郑明新 . 大直径变径桩竖向承载特性模型试验研究(I)[J]. , 2012, 33(10): 2947 -2952 .
[10]	胡万雨，陈向浩，林江，况磊强 . 瀑布沟水电站砾石土心墙初次蓄水期原位钻孔渗流试验研究[J]. , 2013, 34(5): 1259 -1263 .