›› 2015, Vol. 36 ›› Issue (6): 1737-1743.doi: 10.16285/j.rsm.2015.06.027

• 岩土工程研究 • 上一篇    下一篇

崩落法转充填法采矿地表移动二维离散元程序数值模拟及其规律验证

曹 帅1, 2,杜翠凤1, 2,母昌平3,雷远坤4   

  1. 1. 北京科技大学 金属矿山高效开采与安全教育部重点试验室,北京 100083;2. 北京科技大学 土木与环境工程学院,北京 100083;3. 四川省冶金设计研究院,四川 成都 610041;4. 武钢矿业公司程潮铁矿,湖北 武汉 430080
  • 收稿日期:2014-01-06 出版日期:2015-06-11 发布日期:2018-06-14
  • 通讯作者: 杜翠凤,女,1966年生,博士生导师,主要从事矿山灾害防治及安全生产管理信息系统等方面的研究工作。E-mail: ducuifeng@126.com E-mail:sandy_cao@foxmail.com
  • 作者简介:曹帅,男,1988年生,博士研究生,主要从事采矿工艺及岩石力学等方面的研究工作
  • 基金资助:

    国家自然科学基金(No.51374033);高等学校博士学科点专项科研基金(No. 20120006110022)。

UDEC- based modelling of mining surface movement due to transforming from block caving to sublevel filling and its law verification

CAO Shuai1, 2,DU Cui-feng1, 2,MU Chang-ping3,LEI Yuan-kun4   

  1. 1. Key Laboratory of High-Efficient Mining and Safety of Metal Mines of Ministry of Education, University of Science and Technology Beijing, Beijing 100083, China; 2. School of Civil and Environmental Engineering, University of Science and Technology Beijing, Beijing 100083, China; 3.Sichuan Metallurgical Design & Research Institute, Chengdu, Sichuan 610041, China ; 4.Chengchao Iron Mine, Wuhan Iron & Steel Group Minerals Co., Ltd.,Wuhan, Hubei 430080, China
  • Received:2014-01-06 Online:2015-06-11 Published:2018-06-14

摘要: 基于数字式全景钻孔摄像系统及现场统计对井下矿体及围岩进行了节理调查分析,利用Surpac建立了采空区三维模型并进行剖分,最终建立了二维离散元模型(UDEC),研究不同水平矿体开采时位移场的变化规律和采空区上覆岩层的冒落形式,记录并分析矿体开采过程中岩石移动角变化规律并进行了对比验证。研究结果表明:充填法开采-430~-500 m矿体时,采空区最大位移为205.6 cm,小于崩落法的215.2 cm;对比充填法和崩落法新副井沉降值和水平位移值发现,充填法地表倾斜率为0.56 mm/m,小于崩落法的1.22 mm/m,水平变形率为1.03 mm/m,小于崩落法的1.31 mm/m,对于控制新副井沉降和地表移动具有良好效果。在崩落法开采时覆岩移动存在一定间歇性和跳跃性,冒落过程中可能形成自稳平衡拱,从而形成隐伏采空区。根据实际监测与模拟结果对比,在同一水平开采时间较长时,移动角减小速率呈跳跃性非均匀变化,表现为缓慢变化-加速变化-缓慢变化-加速变化的循环过程,进一步验证了自稳平衡拱和隐伏采空区的存在。

关键词: 崩落法, 充填法, 节理调查, 二维离散元程序(UDEC)模型, 地表变形

Abstract: An investigation into the joints of the ore body and rock mass at Chengchao iron mine is performed with combination of digital panoramic borehole camera system and in-situ statistics. Based on software Surpac, a 3D model for the gob is built. By subdividing the 3D model, a 2D discrete element model based on Universal Distinct Element Code is developed. The model is utilized to simulate the law of displacement fields and the rock-fall patterns of the overlying rock at different elevations when ore bodies are mined. The variations of the rock movement angle are analyzed. It is shown that: (1)When the ore bodies at the elevations between -430m and -500m are mined using back filling method; the maximum displacement for the gob is 205.6cm, which is smaller than the 215.2cm measured with the caving method. By comparing the settlement values and the horizontal displacement values of the auxiliary shaft, it is found that the incline rate of surface is 0.56mm/m for back filling method, smaller than the 1.22mm/m for the caving method; the horizontal deformantion rate is 1.03mm/m, smaller than the 1.31mm/m for the caving method; it is shown that the back filling method has a good effect on controlling overlying rock displacement and ground movement. (2) The movement of the overlying rock behaves in the manner of intermittence and jump when using the caving method. A self-balancing arch can be formed in the process of the overlying rock falling; hence, a number of hidden gobs may occur. Based on the comparison between the practical monitoring data and the numerical simulation, it is found that when a long period mining is carried out at a given depth, the decrease rate of movement angle exhibits a nonuniform variation mode, namely “slow-acceleration” cycle, implying the occurance of the self-balancing arches and gobs.

Key words: block caving, sublevel filling, joint survey, universal distinct element code model, surface deformation

中图分类号: 

  • TD8
[1] 宋许根,陈从新,庞厚利,夏开宗,陈 山,杨括宇,孙朝燚,. 金属矿山采矿推进与地表变形关系研究[J]. , 2018, 39(S1): 425-436.
[2] 邓洋洋,陈从新,夏开宗,付 华,孙朝燚,宋许根, . 地下采矿引起的程潮铁矿东区地表变形规律研究[J]. , 2018, 39(9): 3385-3394.
[3] 邓洋洋,陈从新,夏开宗,付 华,张海娜. 程潮铁矿东主井区地表变形特征和机制分析[J]. , 2016, 37(S1): 455-461.
[4] 李小春 ,袁 维,白 冰,. CO2地质封存力学问题的数值模拟方法综述[J]. , 2016, 37(6): 1762-1772.
[5] 夏开宗,陈从新,付 华,郑 允,邓洋洋. 金属矿山崩落采矿法引起的岩层移动规律分析[J]. , 2016, 37(5): 1434-1440.
[6] 吴锋波 ,金 淮,朱少坤,. 北京市轨道交通基坑工程地表变形特性[J]. , 2016, 37(4): 1066-1074.
[7] 夏开宗,陈从新,夏天游,董元滨,付 华,邓洋洋. 结构面对程潮铁矿西区地表变形的影响分析[J]. , 2015, 36(5): 1389-1396.
[8] 席人双,陈从新,肖国锋,黄平路. 结构面对程潮铁矿东区地表及岩体移动变形的影响研究[J]. , 2011, 32(S2): 532-538.
[9] 张亚民,马凤山,徐嘉谟,赵海军. 高应力区露天转地下开采岩体移动规律[J]. , 2011, 32(S1): 590-0595.
[10] 李 朋 ,徐海清 ,李振伟. 紧邻多孔交叠盾构隧道施工影响分析[J]. , 2011, 32(S1): 761-0765.
[11] 孔祥兴,夏才初,仇玉良,张丽英,龚建伍. 平行小净距盾构与CRD法黄土地铁隧道施工力学研究[J]. , 2011, 32(2): 516-524.
[12] 陶干强,任青云,罗 辉,刘振东. 无底柱分段崩落法采场稳定性分析[J]. , 2011, 32(12): 3768-3772.
[13] 黄平路,陈从新. 厚覆盖层矿山地下开采地表塌陷机制分析[J]. , 2010, 31(S1): 357-362.
[14] 程 涛,晏克勤. 应力路径对地表变形特性影响的数值模拟[J]. , 2010, 31(2): 661-666.
[15] 冯兴隆,王李管,毕 林,龚元翔,尚晓明. 矿石崩落块度的三维建模技术及块度预测[J]. , 2009, 30(6): 1826-1830.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
[1] 陶干强,杨仕教,任凤玉. 崩落矿岩散粒体流动性能试验研究[J]. , 2009, 30(10): 2950 -2954 .
[2] 张文杰,陈云敏. 垃圾填埋场抽水试验及降水方案设计[J]. , 2010, 31(1): 211 -215 .
[3] 宫伟力,安里千,赵海燕,毛灵涛. 基于图像描述的煤岩裂隙CT图像多尺度特征[J]. , 2010, 31(2): 371 -376 .
[4] 万 智,董 辉,刘宝琛. 基于正交设计下SVM滑坡变形时序回归预测的超参数选择[J]. , 2010, 31(2): 503 -508 .
[5] 孙曦源,栾茂田,唐小微. 饱和软黏土地基中桶形基础水平承载力研究[J]. , 2010, 31(2): 667 -672 .
[6] 王明年,郭 军,罗禄森,喻 渝,杨建民,谭忠盛. 高速铁路大断面黄土隧道深浅埋分界深度研究[J]. , 2010, 31(4): 1157 -1162 .
[7] 胡勇刚,罗 强,张 良,黄 晶,陈亚美. 基于离心模型试验的水泥土搅拌法加固斜坡软弱土地基变形特性分析[J]. , 2010, 31(7): 2207 -2213 .
[8] 谭峰屹,姜志全,李仲秋,颜惠和. 附加质量法在昆明新机场填料压实密度检测中的应用研究[J]. , 2010, 31(7): 2214 -2218 .
[9] 柴 波,殷坤龙,肖拥军. 巴东新城区库岸斜坡软弱带特征[J]. , 2010, 31(8): 2501 -2506 .
[10] 杨召亮,孙冠华,郑 宏. 基于潘氏极大值原理的边坡稳定性的整体分析法[J]. , 2011, 32(2): 559 -563 .