›› 2016, Vol. 37 ›› Issue (4): 1161-1170.doi: 10.16285/j.rsm.2016.04.031

• 数值分析 • 上一篇    下一篇

空心圆柱扭转仪定向剪切试验离散元模拟

李 博1, 2,黄茂松1   

  1. 1. 同济大学 地下建筑与工程系,上海 200092;2. 温州大学 防灾减灾研究所,浙江 温州 325000
  • 收稿日期:2014-06-24 出版日期:2016-04-11 发布日期:2018-06-09
  • 通讯作者: 黄茂松,男,1965年生,博士,教授,博士生导师,主要从事岩土工程方面的科研和教学工作。E-mail: mshuang@tongji.edu.cn E-mail:autumnlibo@gmail.com
  • 作者简介:李博,男,1982年生,博士后,副教授,主要从事岩土工程方面的科研和教学工作。
  • 基金资助:

    中国博士后科学基金(No. 2015M571602);国家自然科学基金(No. 41202186,No. 11372228)。

Discrete element simulation for torsional shear test by hollow cylinder apparatus

LI Bo1, 2,HUANG Mao-song1   

  1. 1. Department of Geotechnical Engineering, Tongji University, Shanghai 200092, China; 2. Institute of Disaster Prevention and Mitigation, Wenzhou University, Wenzhou, Zhejiang 325000, China
  • Received:2014-06-24 Online:2016-04-11 Published:2018-06-09
  • Supported by:

    This work was supported by the China Postdoctoral Science Foundation (2015M571602) and National Natural Science Foundation of China (NSFC) (41202186, 11372228).

摘要: 为分析砂土在复杂应力条件下的剪切力学特性,采用商业离散元软件PFC3D对单粒组中密砂的空心扭剪试验进行了仿真模拟,分析了数值试样的应力-应变关系,研究了不同剪切方向下离散介质的强度、体积应变特性以及中主应力比对它们的影响,再现了力链在加载过程中的演化,并对剪切带的倾角做了深入分析。同时,从细观上看,以颗粒接触数和纯转动率变量为中心,观察了试样内部颗粒的运动状态,对比了不同剪切方向下剪切带内外颗粒接触数与纯转动位移的变化。最后,将数值试验结果与已有的室内试验结果进行了对比。此研究实现了复杂应力条件下空心扭剪试样的三维离散元模拟,加深了对空心扭剪试验过程和结果的理解和解释。

关键词: 离散元, 空心圆柱扭剪仪, 剪切带, 组构

Abstract: This paper presents results of three-dimensional simulations of the hollow cylinder test using the discrete element method (DEM). To verify the capability of numerical model, the hollow cylinder specimens are sheared at different principal stress directions. The localization in the specimen are examined in terms of the distributions of stresses and strains. The force chain formation and collapse during the loading are visualized. Meanwhile, the formation of the shear bands in the different shearing directions is characterized by porosity and shear strain rate distributions in the samples. The results show that the shear strain rate contour is a better indicator for shear band development than the porosity contours. To explore the micro behavior of the specimen, the evolutions of coordination number and particle rotation at different locations in the sample are also monitored. It is proved that 3D DEM technique can capture the macro-micro behavior of specimen in the complex stress path, which facilitate the interpretation of the stress-strain behavior from physical lab tests.

Key words: discrete element method, hollow cylinder apparatus, shear band, fabric

中图分类号: 

  • TU 431

[1] 薛亚东, 周杰, 赵丰, 李兴. 基于MatDEM的TBM滚刀破岩机理研究[J]. 岩土力学, 2020, 41(S1): 337-346.
[2] 鲍宁, 魏静, 陈建峰. 桩承式路堤土拱效应三维离散元分析[J]. 岩土力学, 2020, 41(S1): 347-354.
[3] 徐东升, 黄明, 黄佛光, 陈成. 不同级配珊瑚砂水泥胶结体的破坏行为分析[J]. 岩土力学, 2020, 41(5): 1531-1539.
[4] 吴祁新, 杨仲轩. 基于应变响应包络的颗粒材料增量力学行为研究[J]. 岩土力学, 2020, 41(3): 915-922.
[5] 孙红, 宋春雨, 滕慕薇, 葛修润. 加荷条件下软黏土的孔隙演化特征[J]. 岩土力学, 2020, 41(1): 141-146.
[6] 孙博, 杨怀德, 谷玲, 刘跃, 唐碧华, 赵桂连, 张连明. 基于UDEC颗粒模型的不确定性分析[J]. 岩土力学, 2019, 40(9): 3679-3688.
[7] 尹晓萌, 晏鄂川, 王鲁男, 陈 利, . 各向异性片岩的微观组构信息定量 提取与断面形貌特征分析[J]. 岩土力学, 2019, 40(7): 2617-2627.
[8] 余良贵, 周建, 温晓贵, 徐杰, 罗凌晖, . 利用HCA研究黏土渗透系数的标准探索[J]. 岩土力学, 2019, 40(6): 2293-2302.
[9] 王蕴嘉, 宋二祥. 堆石料颗粒形状对堆积密度及强度影响的 离散元分析[J]. 岩土力学, 2019, 40(6): 2416-2426.
[10] 付龙龙, 周顺华, 田志尧, 田哲侃, . 双轴压缩条件下颗粒材料中力链的演化[J]. 岩土力学, 2019, 40(6): 2427-2434.
[11] 陈 峥, 何 平, 颜杜民, 高红杰, . 考虑土拱效应的管棚合理间距计算方法[J]. 岩土力学, 2019, 40(5): 1993-2000.
[12] 赵兰浩, 芮开天, 刘勋楠. 非均匀颗粒快速线性接触检测算法[J]. 岩土力学, 2019, 40(3): 1187-1196.
[13] 顾晓强, 杨朔成, . 基于离散元数值方法的砂土小应变弹性特性探讨[J]. 岩土力学, 2019, 40(2): 785-791.
[14] 李静, 孔祥超, 宋明水, 汪勇, 王昊, 刘旭亮, . 储层岩石微观孔隙结构对岩石力学特性 及裂缝扩展影响研究[J]. 岩土力学, 2019, 40(11): 4149-4156.
[15] 肖思友, 苏立君, 姜元俊, 李丞, 刘振宇, . 坡度对碎屑流冲击立式拦挡墙力学特征的影响[J]. 岩土力学, 2019, 40(11): 4341-4351.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!