›› 2016, Vol. 37 ›› Issue (10): 3003-3010.doi: 10.16285/j.rsm.2016.10.035

• 数值分析 • 上一篇    下一篇

水力劈裂对岩体中自然裂纹的影响研究

石路杨1,李 建2,许晓瑞2,余天堂3   

  1. 1. 华北水利水电大学 工程力学系,河南 郑州 450045;2. 黄河水利职业技术学院 水利工程学院,河南 开封 475000; 3. 河海大学 工程力学系,江苏 南京 210098
  • 收稿日期:2014-10-30 出版日期:2016-10-11 发布日期:2018-06-09
  • 作者简介:石路杨,女,1988年生,博士,讲师,主要从事计算力学与工程仿真方面的研究工作。
  • 基金资助:

    国家自然科学基金项目(No. 51179063);华北水利水电大学高层次人才科研启动项目(No. 201345)

Influence of hydraulic fracturing on natural fracture in rock mass

SHI Lu-yang1, LI Jian2, XU Xiao-rui2, YU Tian-tang3   

  1. 1. Department of Engineering Mechanics, North China University of Water Resources and Electric Power, Zhengzhou, Henan 450045, China; 2. College of Water Conservancy Engineering, Yellow River Conservancy Technical Institute, Kaifeng, Henan 475000, China; 3. Department of Engineering Mechanics, Hohai University, Nanjing, Jiangsu 210098, China
  • Received:2014-10-30 Online:2016-10-11 Published:2018-06-09
  • Supported by:

    This work was supported by the National Natural Science Foundation of China (51179063) and the Science and Technology Fund of Training the High-level Talents of North China University of Water Resources and Electric Power (201345).

摘要: 建立了求解自然裂纹和水力裂纹扩展的扩展有限元法,对裂纹附近区域的节点采用广义形函数,并采用线增函数消除混合单元,以提高裂纹附近的精度。引入水力劈裂的非耦合模型,即假设裂纹中的水压力为均布力;用砂浆法(线段-线段接触法)结合增广型拉格朗日乘子法处理受压裂纹段的接触条件。并通过算例分析了以下内容:计算了受压裂纹和裂纹面分布均布水压力的水力裂纹的应力强度因子,并与解析解进行了比较,结果表明,提出的方法具有很高的精度;模拟了水力裂纹对自然裂纹面的影响,并分析了自然裂纹面上的接触力和接触状态。

关键词: 自然裂纹, 水力劈裂, 扩展有限元法, 广义形函数, 接触条件, 砂浆法, 增广型拉格朗日乘子法

Abstract: The extended finite element method (XFEM) is presented to simulate natural fracture and hydraulic fracture. The generalized nodal shape functions are used in a cluster of nodes around cracks. To improve the accuracy in the vicinity of crack, a ramp function is used to avoid the blending element problem. An uncoupled model is used for hydraulic fracturing, which assumes uniform water pressures at crack faces. The mortar method (segment-segment contact approach) in combination with the augmented Lagrange’s method is adopted to establish contact conditions between the closed natural fracture faces. Several numerical examples are analyzed in detail. In comparisons with analytical solutions, the proposed method obtains higher accuracy on computing the stress intensity factors of the pressurized crack and the hydraulic fracture with the uniform water pressure on the crack faces. The influence of hydraulic fracturing on natural fracture face is simulated, and the contact stress and contact condition on the natural fracture face are further analyzed.

Key words: natural fracture, hydraulic fracture, extended finite element method, generalized shape function, contact condition, mortar method, augmented Lagrange’s multiplier method

中图分类号: 

  • TU 452

[1] 王翔南, 郝青硕, 喻葭临, 于玉贞, 吕禾. 基于扩展有限元法的大坝面板脱空三维模拟分析[J]. 岩土力学, 2020, 41(S1): 329-336.
[2] 王翔南, 李全明, 于玉贞, 喻葭临, 吕禾, . 基于扩展有限元法对土体滑坡破坏过程的模拟[J]. 岩土力学, 2019, 40(6): 2435-2442.
[3] 郑安兴, 罗先启, 陈振华, . 基于扩展有限元法的岩体水力劈裂耦合模型[J]. 岩土力学, 2019, 40(2): 799-808.
[4] 李东奇,李宗利,吕从聪. 考虑裂隙附加水压的岩体断裂强度分析[J]. , 2018, 39(9): 3174-3180.
[5] 郑安兴,罗先启,. 危岩水力劈裂分析的扩展有限元法[J]. , 2018, 39(9): 3461-3468.
[6] 杨石扣,任旭华,张继勋,. 基于数值流形法的重力坝水力劈裂研究[J]. , 2018, 39(8): 3055-3060.
[7] 罗先启,郑安兴,. 岩体裂隙模拟的扩展有限元法应用研究[J]. , 2018, 39(2): 728-734.
[8] 杨石扣,任旭华,张继勋,. 改进的数值流形法在水力劈裂中的应用[J]. , 2018, 39(10): 3875-3881.
[9] 燕秀发 ,钱七虎 ,赵跃堂 , 周寅智,. 准脆性材料断裂模拟方法研究[J]. , 2017, 38(12): 3462-3468.
[10] 闫澍旺 ,李 嘉 ,贾沼霖 ,孙立强 , . 海洋石油平台超长桩拒锤分析及工程实例[J]. , 2015, 36(S2): 559-564.
[11] 袁俊平 ,王启贵 , . 水力劈裂楔劈效应试验研究[J]. , 2015, 36(12): 3360-3364.
[12] 王 振,余天堂. 模拟三维裂纹问题的多尺度扩展有限元法[J]. , 2014, 35(9): 2702-2708.
[13] 师 访 ,高 峰 ,李玺茹 ,沈晓明 , . 模拟岩石压剪状态下主次裂纹萌生开裂的扩展有限元法[J]. , 2014, 35(6): 1809-1817.
[14] 师 访 ,高 峰 ,杨玉贵 , . 正交各向异性岩体裂纹扩展的扩展有限元方法研究[J]. , 2014, 35(4): 1203-1210.
[15] 赵延林,彭青阳,万 文,王卫军,张盛国 , . 高水压下岩体裂纹扩展的渗流-断裂耦合机制与数值实现[J]. , 2014, 299(2): 556-564.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
[1] 徐金明,羌培,张鹏飞. 粉质黏土图像的纹理特征分析[J]. , 2009, 30(10): 2903 -2907 .
[2] 梁桂兰,徐卫亚,谈小龙. 基于熵权的可拓理论在岩体质量评价中的应用[J]. , 2010, 31(2): 535 -540 .
[3] 马文涛. 基于灰色最小二乘支持向量机的边坡位移预测[J]. , 2010, 31(5): 1670 -1674 .
[4] 于琳琳,徐学燕,邱明国,闫自利,李鹏飞. 冻融作用对饱和粉质黏土抗剪性能的影响[J]. , 2010, 31(8): 2448 -2452 .
[5] 王 伟,刘必灯,周正华,王玉石,赵纪生. 刚度和阻尼频率相关的等效线性化方法[J]. , 2010, 31(12): 3928 -3933 .
[6] 王海波,徐 明,宋二祥. 基于硬化土模型的小应变本构模型研究[J]. , 2011, 32(1): 39 -43 .
[7] 曹光栩,宋二祥,徐 明. 山区机场高填方地基工后沉降变形简化算法[J]. , 2011, 32(S1): 1 -5 .
[8] 刘华丽 ,朱大勇 ,钱七虎 ,李宏伟. 边坡三维端部效应分析[J]. , 2011, 32(6): 1905 -1909 .
[9] 刘年平 ,王宏图 ,袁志刚 ,刘竟成. 砂土液化预测的Fisher判别模型及应用[J]. , 2012, 33(2): 554 -557 .
[10] 王卫东 ,李永辉 ,吴江斌 . 超长灌注桩桩-土界面剪切模型及其有限元模拟[J]. , 2012, 33(12): 3818 -3824 .