›› 2016, Vol. 37 ›› Issue (S2): 337-342.doi: 10.16285/j.rsm.2016.S2.042

• 基础理论与实验研究 • 上一篇    下一篇

一种三维土压力盒的工作原理及其应用

李顺群1,夏锦红2,王杏杏3   

  1. 1.河南大学 土木建筑学院,河南 开封 475004;2.新乡学院 土木工程与建筑系,河南 新乡 453003; 3.天津城建大学 土木工程学院,天津 300384
  • 收稿日期:2016-01-07 出版日期:2016-11-11 发布日期:2018-06-09
  • 作者简介:李顺群,男,1971年生,博士/博士后,教授,注册土木工程师,从事土力学和基础工程领域的教学和研究工作。
  • 基金资助:
    国家自然科学基金(No. 51178290,No. 41472253);天津市自然科学基金重点项目(No. 16JCZDJC39000)。

Principle and its application of a three-dimensional earth pressure cell

LI Shun-qun1, XIA Jin-hong2, WANG Xing-xing3   

  1. 1. School of Civil Engineering and Architecture, Henan University, Kaifeng, Henan 475004, China; 2. Department of Civil engineering and architecture, Xinxiang University, Xinxiang, Henan 453003, China; 3. School of Civil Engineering, Tianjin Chengjian University, Tianjin 300384, China
  • Received:2016-01-07 Online:2016-11-11 Published:2018-06-09
  • Supported by:
    This work was supported by National Natural Science Foundation of China (51178290, 41472253) and Key Project of Natural Science Foundation of Tianjin City (16JCZDJC39000).

摘要: 基于应力理论,设计了一种能测量土中三维应力状态的三维土压力盒,由一个开槽的十二面体基座和6个常规土压力盒组成。根据任一方向上正应力与常规应力表示方法6个分量之间的关系,建立了三维土压力盒测试数据与常规应力表示方法之间的转换矩阵,给出了由测试数据到常规应力状态的计算方法,并进行了误差分析。考虑基座加工便利性和测试过程的便利性要求,着重阐述了等菱形十二面体三维土压力盒的工作原理、制作过程、测试方法和数据处理等关键环节。对某不饱和重塑土进行了一维压缩,并用测试装置测量了土中6个方向的正应力,推演出了对应的常规应力表达值。结果表明,常规应力表示方法中的两个水平应力基本相等且小于竖向应力,同时水平面和两个竖直面上的剪应力很小,与一维压缩的力学特点吻合,测试装置的设计合理。

关键词: 三维土压力盒, 十二面体, 转换矩阵, 应力状态表示, 误差分析

Abstract: Based on the stress theory, a three-dimensional earth pressure cell was designed for measuring three-dimensional stress state in soil. The device is composed of a slotted dodecahedron base and six conventional earth pressure cells. According to relationship between any normal stress in a direction and the six components of general three-dimensional stress, a transformation matrix was established from test data obtained by three-dimensional earth pressure cell to general stress state. The calculation method of the test data to the general stress state was given; and the error analysis was carried out. Considering machining convenience of the base and simplicity of the test procedure, the paper focuses on illustrating the principle, production process, test method and data processing for the rhombic dodecahedron three-dimensional earth pressure cell. One-dimensional compression experiment on an unsaturated remolded soil was performed and a device measuring normal stress in six directions was given herein. The conventional stress results deduced by test data show that the two horizontal stress is substantially equal and less than the vertical stress. At the same time, the three shear stresses of the conventional stress are small and near zero. That is consistent with mechanical characteristics of one-dimensional compression on soil. Therefore, the design of the device is reasonable.

Key words: three-dimensional earth pressure cell, dodecahedron, transformation matrix, stress state representation, error analysis

中图分类号: 

  • TU 441+.33
[1] 闫振雄,郭奇峰,王培涛, . 空心包体应变计地应力分量计算方法及应用[J]. , 2018, 39(2): 715-721.
[2] 吴顺川 ,黄小庆,陈 钒,柴金飞,吴昊燕, . 岩体破裂矩张量反演方法及其应用[J]. , 2016, 37(S1): 1-18.
[3] 高 帅,魏 宁,李小春. 盖岩CO2突破压测试方法综述[J]. , 2015, 36(9): 2716-2727.
[4] 李顺群 ,高凌霞 ,冯慧强 ,张少峰,. 一种接触式三维应变花的工作原理及其应用[J]. , 2015, 36(5): 1513-1520.
[5] 陈乐意 ,姜安龙 ,李镜培. 考虑地基土自重影响的地基承载力系数[J]. , 2012, 33(1): 215-219.
[6] 郑 鑫 ,陶夏新 ,王福彤. 传递矩阵法求解弹性半空间单一覆盖层轴对称动力问题的误差分析[J]. , 2011, 32(12): 3763-3767.
[7] 舒本仁; . 钢尺式收敛计的误差分析[J]. , 1986, 7(1): 67-72.
[8] 林继清. 爆破加速度测量及标定误差分析[J]. , 1982, 3(1): 109-118.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!