›› 2017, Vol. 38 ›› Issue (4): 1218-1225.doi: 10.16285/j.rsm.2017.04.037

• 数值分析 • 上一篇    下一篇

一种基于TIN-CPG混合空间数据模型的精细三维地质模型构建方法

唐丙寅1, 2,吴冲龙3, 4,李新川3   

  1. 1. 南阳理工学院 软件学院,河南 南阳 473004;2. 中国地质大学(武汉)资源学院,湖北 武汉 430074; 3. 中国地质大学(武汉)计算机学院,湖北 武汉 430074;4. 中国地质大学(武汉)教育部长江三峡库区地质灾害研究中心,湖北 武汉 430074
  • 收稿日期:2015-05-25 出版日期:2017-04-11 发布日期:2018-06-05
  • 通讯作者: 吴冲龙,男,1945年生,硕士,教授,博士生导师,主要从事地学信息工程的研究与教学工作。E-mail: wucl@cug.edu.cn E-mail:angin513@163.com
  • 作者简介:唐丙寅,男,1986年生,博士,讲师,主要从事地学信息三维可视化和地理信息系统相关的研究工作。
  • 基金资助:

    国家高技术研究发展计划(863计划)(No. 2008AA121602)。

A fine 3D geological modeling method based on TIN-CPG hybrid spatial data model

TANG Bing-yin1, 2, WU Chong-long3, 4, LI Xin-chuan3   

  1. 1. School of Software, Nanyang Institute of Technology, Nanyang, Henan 473004, China; 2. Faculty of Earth Resources, China University of Geosciences(Wuhan), Wuhan, Hubei 430074, China; 3. College of Computer Science, China University of Geosciences(Wuhan), Wuhan, Hubei 430074, China; 4. Three Gorges Research Center for Geo-hazard of Ministry of Education, China University of Geosciences(Wuhan), Wuhan, Hubei 430074, China
  • Received:2015-05-25 Online:2017-04-11 Published:2018-06-05
  • Supported by:

    This work was supported by the National High Technology Research and Development Program of China (863 Program) (2008AA121602).

摘要: 精细三维地质模型的构建是实现地质体真三维可视化分析的难题之一。提出一种基于不规则三角网(TIN)和角点网格(CPG)的混合空间数据模型来构建三维精细地质模型的方法。首先建立基于TIN的构造-地层格架三维地质模型,然后进行TIN面元模型到CPG体元模型的转换,将基于TIN的构造-地层格架模型转换为基于CPG的精细网格体元地质模型,从而实现“表达上”精细三维地质模型的构建。在转换过程中首先要进行地层序列的定义,然后对空间格网进行划分,在此基础上计算格网中各个单元格的空间坐标和各个网格的有效性,并将计算结果存储为GRDECL格式文件,最后通过QuantyView3D系统读取该文件实现精细地质属性模型的展示。利用该方法对沿海某城市一个重点区域进行精细水文地质模型的构建,验证了其方法的可行性。

关键词: 不规则三角网(TIN), 角点网格(CPG), TIN-CPG混合空间数据模型, 精细三维地质建模

Abstract: The construction of fine 3D geological modeling is one of challenges in realizing true 3D visualization of geological body. Based on Triangulate Irregular Network (TIN) and Corner Point Grid (CPG) spatial data model, we propose a hybrid spatial data model for constructing fine 3D geological model. Firstly, a tectonic-stratigraphic framework model is set up based on TIN. Then, the framework model is converted into fine volumetric 3D geological model based on CPG voxel data model, and thus the fine expression of inner space of 3D geological body is achieved. During the converting process, it is necessary to define the order of strata. The mesh of the geological body is further realized by calculating the spatial coordinate of each grid cell and validating and saving data file in GRDECL format. Finally, the fine geological model is displayed by inputting the file into QuantyView3D system. A fine 3D hydrogeological model of the key area of a coastal city is constructed successfully by using the proposed method, and the feasibility of this method is verified.

Key words: triangulate irregular network (TIN), corner point grid (CPG), TIN-CPG hybrid spatial data model, fine 3D geological modeling

中图分类号: 

  • P 642

[1] 张 萍,杨春和,汪 虎,郭印同,徐 峰,侯振坤,. 页岩单轴压缩应力-应变特征及能量各向异性[J]. , 2018, 39(6): 2106-2114.
[2] 汪班桥,李 楠,门玉明,张妙芝. 滑坡防治格构梁锚固系统振动台模型试验[J]. , 2018, 39(3): 782-788.
[3] 李 宁,郭双枫,姚显春,. 再论岩质高边坡稳定性分析方法[J]. , 2018, 39(2): 397-406.
[4] 倪卫达,单治钢,刘 晓,. 基于三维节理网络模拟的坝基岩体结构分类研究[J]. , 2018, 39(1): 287-296.
[5] 叶祖洋,姜清辉,刘艳章,程爱平,胡少华,孙辅庭,. 岩体离散裂隙网络的非饱和渗流数值分析[J]. , 2017, 38(11): 3332-3340.
[6] 石博溢,倪万魁,王衍汇,李征征,袁志辉,. 重塑黄土压缩变形的预测模型研究[J]. , 2016, 37(7): 1963-1968.
[7] 李龙起,巨能攀, . 光栅测试技术在顺层边坡降雨模型试验中的应用研究[J]. , 2016, 37(7): 2119-2128.
[8] 陈静瑜 ,赵炼恒 ,李 亮 ,谭捍华,. 基于Excel数据表和极限分析法的滑坡抗剪强度参数反演分析[J]. , 2016, 37(3): 827-834.
[9] 周 飞 ,许 强 ,刘汉香 ,王 龙,. 地震作用下含水平软弱夹层斜坡动力响应特性研究[J]. , 2016, 37(1): 133-139.
[10] 申 通,王运生,吴龙科. 重庆小南海滑坡形成机制离散元模拟分析[J]. , 2014, 35(S2): 667-675.
[11] 邹宗兴 ,唐辉明 ,熊承仁 ,刘 晓 ,倪卫达 ,葛云峰,. 高速岩质滑坡启动弹冲加速机制及弹冲速度计算 ——以武隆县鸡尾山滑坡为例[J]. , 2014, 35(7): 2004-2012.
[12] 顾成壮 ,杨鸿发 ,胡卸文 ,曾锦秀 ,罗 刚 . 模糊综合评判法分析地震滑坡启程能量转换[J]. , 2012, 33(S1): 297-302.
[13] 张平松 ,胡雄武 ,吴荣新. 岩层变形与破坏电法测试系统研究[J]. , 2012, 33(3): 952-956.
[14] 宋 琨 ,晏鄂川 ,朱大鹏 ,赵庆远. 基于滑体渗透性与库水变动的滑坡稳定性变化规律研究[J]. , 2011, 32(9): 2798-2802.
[15] 陈国良 ,刘修国 ,盛 谦 ,张勇慧. 一种基于交叉剖面的地质模型构建方法[J]. , 2011, 32(8): 2409-2415.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!