›› 2017, Vol. 38 ›› Issue (S1): 219-224.doi: 10.16285/j.rsm.2017.S1.026

• 基础理论与实验研究 • 上一篇    下一篇

考虑结构面间距的双因素分组方法研究

刘铁新1, 2,邓建辉1, 2,陈 滔1, 2,李林芮1, 2   

  1. 1. 四川大学 水力学与山区河流开发保护国家重点实验室,四川 成都 610065;2. 四川大学 水利水电学院,四川 成都 610065
  • 收稿日期:2016-12-29 出版日期:2017-06-22 发布日期:2018-06-05
  • 通讯作者: 邓建辉,男,1965年生,博士,教授,从事岩质边坡稳定性分析、高地应力等方面研究工作。E-mail:jhdeng@scu.edu.cn
  • 作者简介:刘铁新,男,1988年生,博士研究生,主要从事岩质边坡稳定性分析等方面研究工作。
  • 基金资助:

    国家重点研发计划(No. 2016YFC0600702)。

Double-factor clustering method considering spacing of discontinuities

LIU Tie-xin1,2, DENG Jian-hui1,2, CHEN Tao1,2, LI Lin-rui1,2   

  1. 1. State Key Laboratory of Hydraulics and Mountain River Engineering, Sichuan University, Chengdu, Sichuan 610065, China; 2. College of Water Resources & Hydropower, Sichuan University, Chengdu, Sichuan 610065, China
  • Received:2016-12-29 Online:2017-06-22 Published:2018-06-05
  • Supported by:

    This work was supported by the National Key Research and Development Plan of China (2016YFC0600702).

摘要: 同一期地质运动中岩体所产生的结构面间距一般认为服从负指数分布。目前方法多根据产状单一因素进行分组,分组完成后同一组结构面的间距分布可能非常不规则,针对该问题,结合目前结构面采集到的数据质量高且具有空间位置等特点,提出一种新的双因素分组方法 (a new double-factor clustering method,NDCM)。分组时可综合考虑结构面产状与间距信息,该方法分组初值由模糊K均值法 (fuzzy K-means) 获取,通过调整隶属度较低的结构面分组编码达到修正结构面间距,使其满足负指数分布的目的。为获得NDCM的分组精度,进行了数值模型计算,该模型中结构面分组情况已知,利用模糊K均值法和NDCM法分别对此模型进行结构面分组。对比结果表明,NDCM法分组精度明显优于模糊K均值分组方法;重叠率越高组数越多这种优势越明显;相比于模糊K均值法,NDCM分组精度平均可以提升0.06左右。

关键词: 结构面, 分组, 间距, 产状

Abstract: Spacing of discontinuities formed in the same tectonic stage is believed to obey a negative exponential distribution. Single factor clustering method according to orientation is most commonly used. However, the probability density function of spacing in one set of discontinuities clustered only based on orientation may be irregular, even exhibiting no rules. To overcome the deficiency, this study proposeds a new double-factor clustering method(NDCM), considering spacing distribution and orientation of discontinuities during clustering. The initial clustering result and membership values are obtained based on the fuzzy K-means. Through redistribution of the discontinuities whose membership values are low, this method adjusts the probability density function of spacing to make it more closely obey a negative exponential distribution. To obtain the clustering precision of NDCM, a numerical model calculation which contained two and three discontinuity sets has been made and the correct set code of every discontinuity were known. The model has been calculated by the two methods. Comparison results show that NDCM has an obvious advantage over fuzzy K means in clustering precision. About 6% promotion occurs in precision clustered by NDCM compared with fuzzy K means.

Key words: discontinuity, clustering, spacing, orientation

中图分类号: 

  • TU 452

[1] 陈庆发, 杨承业, 尹庭昌, 王宇, . 金属矿山矿块单元结构体组合关系研究[J]. 岩土力学, 2020, 41(S1): 74-82.
[2] 邹先坚, 王益腾, 王川婴. 钻孔图像中岩石结构面三维形貌特征及 优势抗滑方向研究[J]. 岩土力学, 2020, 41(S1): 290-298.
[3] 洪陈杰, 黄曼, 夏才初, 罗战友, 杜时贵, . 岩体结构面各向异性变异系数的尺寸效应研究[J]. 岩土力学, 2020, 41(6): 2098-2109.
[4] 李红坡, 梅国雄, 肖涛, 陈征. 涂抹区重叠竖井地基固结特性研究[J]. 岩土力学, 2020, 41(5): 1560-1566.
[5] 侯钦宽, 雍睿, 杜时贵, 徐敏娜, 曹泽敏. 结构面粗糙度统计测量最小样本数确定方法[J]. 岩土力学, 2020, 41(4): 1259-1269.
[6] 崔学杰, 晏鄂川, 陈 武. 基于改进遗传算法的岩体结构面产状聚类分析[J]. 岩土力学, 2019, 40(S1): 374-380.
[7] 谢芸菲, 迟世春, 周雄雄, . 复杂环境中大规模桩筏基础的优化设计方法研究[J]. 岩土力学, 2019, 40(S1): 486-493.
[8] 彭守建, 岳雨晴, 刘义鑫, 许江, . 不同成因结构面各向异性特征及其剪切力学特性[J]. 岩土力学, 2019, 40(9): 3291-3299.
[9] 许江, 邬君宇, 刘义鑫, 雷娇, . 不同充填度下岩体剪切−渗流耦合试验研究[J]. 岩土力学, 2019, 40(9): 3416-3424.
[10] 陈冲, 王卫, 吕华永, . 基于复合抗滑桩模型加固边坡稳定性分析[J]. 岩土力学, 2019, 40(8): 3207-3217.
[11] 温森, 周书宇, 盛桂琳, . 复合岩层中滚刀旋转切割破岩效率试验研究[J]. 岩土力学, 2019, 40(7): 2628-2636.
[12] 吴关叶, 郑惠峰, 徐建荣. 三维复杂块体系统边坡深层加固条件下稳定性及 破坏机制模型试验研究[J]. 岩土力学, 2019, 40(6): 2369-2378.
[13] 许 江, 瞿佳美, 刘义鑫, 彭守建, 王 威, 吴善康, . 循环剪切荷载作用下充填物对结构面 剪切特性影响试验研究[J]. 岩土力学, 2019, 40(5): 1627-1637.
[14] 郑青松, 刘恩龙, 刘明星, . 三轴试验下结构面倾角对制备岩样力学特性的影响[J]. 岩土力学, 2019, 40(5): 1854-1861.
[15] 朱仁杰, 车爱兰, 严 飞, 文 海, 葛修润, . 含贯通性结构面岩质边坡动力演化规律[J]. 岩土力学, 2019, 40(5): 1907-1915.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!