基于三维扫描和三维雕刻技术的岩石结构面原状重构方法及其力学特性

doi:10.16285/j.rsm.2017.1941

›› 2018, Vol. 39 ›› Issue (2): 417-425.doi: 10.16285/j.rsm.2017.1941

基于三维扫描和三维雕刻技术的岩石结构面原状重构方法及其力学特性

周辉^{1, 2}，程广坦^{1, 2}，朱勇^{1, 2}，卢景景^{1, 2}，陈珺^{1, 2}，崔国建^{1, 2}，李振国³

1. 中国科学院武汉岩土力学研究所岩土力学与工程国家重点试验室，湖北武汉 430071； 2. 中国科学院大学，北京 100049；3. 兖州煤业股份有限公司东滩煤矿，山东济宁 273512

收稿日期:2017-09-25 出版日期:2018-02-10 发布日期:2018-06-06
通讯作者: 程广坦，男，1988年生，博士研究生，主要从事岩石节理表面形貌分析、剪切力学特性、结构面岩爆方面的研究。E-mail: 825474753@qq.com E-mail: hzhou@whrsm.ac.cn
作者简介:周辉，男，1972年生，博士，研究员，主要从事岩石力学试验、理论、数值分析与工程安全性分析方面的研究。
基金资助:
国家重点基础研究发展计划（973）项目（No. 2014CB046902）；国家自然科学基金项目（No. 51427803，No. 51404240，No. 51709257）。

A new method to originally reproduce rock structural plane by integrating 3D scanning and 3D carving techniques and mechanical characteristics of reproduced structural planes

ZHOU Hui^{1, 2}, CHENG Guang-tan^{1, 2}, ZHU Yong^{1, 2}, LU Jing-jing^{1, 2}, CHEN Jun^{1, 2}, CUI Guo-jian^{1, 2}, LI Zhen-guo³

1. State Key Laboratory of Geomechanics and Geotechnical Engineering, Institute of Rock and Soil Mechanics, Chinese Academy of Sciences, Wuhan, Hubei 430071, China; 2. University of Chinese Academy of Sciences, Beijing 100049, China; 3. Yanzhou Coal Mining Company Limited Dongtan Coal Mine, Jining, Shandong 273512, China

Received:2017-09-25 Online:2018-02-10 Published:2018-06-06
Supported by:
This work was supported by the National Program on Key Basic Research Project of China(973 Program)(2014CB046902) and the National Natural Science Foundation of China(51427803, 51404240, 51709257).

摘要/Abstract

摘要： 为了客观重复制作与原岩结构面的岩性、表面形态和力学性质完全一致的试样，集成三维扫描和三维雕刻技术，提出了原岩结构面试样重构新方法。采用该方法制作了具有相同表面形态的大理岩结构面试样，开展了不同法向力下的直剪试验，并采用声发射技术对结构面剪切破坏过程进行了监测。结果表明：重构结构面试样与原始结构面试样具有高度相似性；结构面剪应力-剪切位移曲线可分为两类：剪胀滑移型和剪断跌落型；剪切破坏后结构面可明显地划分为两个区域：剪胀脱开区和剪断磨损区；提出了结构面剪切强度新公式，理论公式与试验结果更接近；结构面剪切过程中剪应力、能量率、计数、撞击率随时间的变化规律具有较好的一致性，声发射定位位置与剪切过程中结构面损伤破坏区域基本吻合。

关键词: 三维扫描, 三维雕刻, 原岩结构面原状重构方法, 直剪试验, 强度特性, 剪胀特征, 声发射

Abstract: To prepare samples with the same lithology, surface morphology and mechanical characteristics as those of natural rock structural planes, a new method was proposed to originally reproduce rock structural planes by integrating 3D scanning and 3D carving techniques. Marble structural plane samples with the same natural surface shape were made using this new method. Shear tests were carried out on the prepared samples at different normal stresses. In addition, the acoustic emission (AE) technique was used to monitor failure processes of marble structural planes. The results indicate that the reproduced samples are accurately similar to the original samples with natural structural plane. The curves of shear stress and shear displacement can be divided into sliding type and cutting type. The shear failure structural plane can be categorised into dilatancy zone and abrasion zone. A new formula of shear strength is put forward, and theoretical values are in good agreement with experimental results. The change laws of shear stress and AE energy rate, count and hit with time are consistent, and the location of AE events is similar to the asperity damage positions during the shear test.

Key words: 3D scanning, 3D carving, a new method to originally reproduce rock structural plane, direct shear test, strength characteristics, dilatancy characteristics, acoustic emission

中图分类号:

TU 452

周辉，程广坦，朱勇，卢景景，陈珺，崔国建，李振国，. 基于三维扫描和三维雕刻技术的岩石结构面原状重构方法及其力学特性[J]. , 2018, 39(2): 417-425.

ZHOU Hui, CHENG Guang-tan, ZHU Yong, LU Jing-jing, . A new method to originally reproduce rock structural plane by integrating 3D scanning and 3D carving techniques and mechanical characteristics of reproduced structural planes[J]. , 2018, 39(2): 417-425.

参考文献

相关文章 15

[1]	王创业, 常新科, 刘沂琳, 郭文彬, . 单轴压缩条件下大理岩破裂过程声发射频谱演化特征实验研究[J]. 岩土力学, 2020, 41(S1): 51-62.
[2]	张艳博, 吴文瑞, 姚旭龙, 梁鹏, 田宝柱, 黄艳利, 梁精龙, . 单轴压缩下花岗岩声发射、红外特征及损伤演化试验研究[J]. 岩土力学, 2020, 41(S1): 139-146.
[3]	张晓君, 李晓程, 刘国磊, 李宝玉, . 卸压孔劈裂局部解危效应试验研究[J]. 岩土力学, 2020, 41(S1): 171-178.
[4]	甘一雄, 吴顺川, 任义, 张光, . 基于声发射上升时间/振幅与平均频率值的花岗岩劈裂破坏评价指标研究[J]. 岩土力学, 2020, 41(7): 2324-2332.
[5]	侯公羽, 荆浩勇, 梁金平, 谭金鑫, 张永康, 杨希, 谢鑫, . 不同荷载下矩形巷道围岩变形及声发射特性试验研究[J]. 岩土力学, 2020, 41(6): 1818-1828.
[6]	张艳博, 孙林, 姚旭龙, 梁鹏, 田宝柱, 刘祥鑫, . 花岗岩破裂过程声发射关键信号时频特征试验研究[J]. 岩土力学, 2020, 41(1): 157-165.
[7]	郑坤, 孟庆山, 汪稔, 余克服, . 珊瑚骨架灰岩三轴压缩声发射特性研究[J]. 岩土力学, 2020, 41(1): 205-213.
[8]	张国凯, 李海波, 王明洋, 李晓锋, . 基于声学测试和摄像技术的单裂隙岩石裂纹扩展特征研究[J]. 岩土力学, 2019, 40(S1): 63-72.
[9]	楼烨, 张广清. 压裂液黏度对循环水力压裂影响的试验研究[J]. 岩土力学, 2019, 40(S1): 109-118.
[10]	刘希灵, 刘周, 李夕兵, 韩梦思. 单轴压缩与劈裂荷载下灰岩声发射b值特性研究[J]. 岩土力学, 2019, 40(S1): 267-274.
[11]	柴维, 龙志林, 旷杜敏, 陈佳敏, 闫超萍. 直剪剪切速率对钙质砂强度及变形特征的影响[J]. 岩土力学, 2019, 40(S1): 359-366.
[12]	杨道学, 赵奎, 曾鹏, 卓毓龙, . 基于粒子群优化算法的未知波速声发射定位数值模[J]. 岩土力学, 2019, 40(S1): 494-502.
[13]	侯公羽, 荆浩勇, 梁金平, 张广东, 谭金鑫, 张永康, 杨希, . 不同卸荷速率下矩形巷道变形及声发射特性试验研究[J]. 岩土力学, 2019, 40(9): 3309-3318.
[14]	宋义敏, 邓琳琳, 吕祥锋, 许海亮, 赵泽鑫, . 岩石摩擦滑动变形演化及声发射特征研究[J]. 岩土力学, 2019, 40(8): 2899-2906.
[15]	程爱平, 张玉山, 戴顺意, 董福松, 曾文旭, 李丹峰, . 单轴压缩胶结充填体声发射参数时空演化规律及破裂预测[J]. 岩土力学, 2019, 40(8): 2965-2974.

Metrics

Viewed

Full text

Abstract

Cited

Shared

Discussed

基于三维扫描和三维雕刻技术的岩石结构面原状重构方法及其力学特性

A new method to originally reproduce rock structural plane by integrating 3D scanning and 3D carving techniques and mechanical characteristics of reproduced structural planes

PDF (Chinese)

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

Metrics

本文评价

推荐阅读 0