岩土力学 ›› 2020, Vol. 41 ›› Issue (6): 2081-2090.doi: 10.16285/j.rsm.2019.1291

• 岩土工程研究 • 上一篇    下一篇

基于多元回归分析的连续压实监控技术

吴龙梁1,江辉煌1, 2,唐建伟3,高明显2,范少峰4,闫晓夏2   

  1. 1. 中国铁道科学研究院,北京 100081;2. 中国铁道科学研究院 深圳研究设计院,广东 深圳 518000;3. 深圳市建筑工务署,广东 深圳 518031;4. 深圳市建设工程质量检测中心,广东 深圳 518052
  • 收稿日期:2019-07-25 修回日期:2019-11-22 出版日期:2020-06-11 发布日期:2020-08-02
  • 作者简介:吴龙梁,男,1988年生,博士研究生,主要从事连续压实控制方面的研究。
  • 基金资助:
    中国铁路总公司科技研究开发计划重点课题(No.2016G006-C);深圳市建筑工务署技术研究课题(No.THZQ-033-2018)。

Continuous compaction monitoring technology based on multiple regression analysis

WU Long-liang1, JIANG Hui-huang1, 2, TANG Jian-wei3, GAO Ming-xian2, FAN Shao-feng4, YAN Xiao-xia2   

  1. 1. China Academy of Railway Sciences Corporation Limited, Beijing 100081, China; 2. Shenzhen Research and Design Institute, China Academy of Railway Sciences Corporation Limited, Shenzhen, Guangdong 518000, China; 3. Bureau Public Work of Shenzhen Municipality, Shenzhen, Guangdong 518031, China; 4. Shenzhen Construction Testing Center, Shenzhen, Guangdong 518052, China
  • Received:2019-07-25 Revised:2019-11-22 Online:2020-06-11 Published:2020-08-02
  • Supported by:
    This work was supported by the Science and Technology Research Program of China Railway Corporation (2016G006-C) and the Shenzhen Institute of Construction Industry Technical Research Project(THZQ-033-2018).

摘要: 现实中的碾压参数难以得到严格控制以满足连续压实控制技术的应用要求,限制了该技术的适用范围和应用效果。为使碾压参数动态变化与工程实际相适应,对碾压参数进行了多元回归分析,并采用克里金插值法对连续压实控制指标的目标值/实测值进行全仓面化估计,提出了以压实合格率作为质量评价指标的连续压实监测模型。开展了现场碾压试验,建立了压实指标与碾压参数的多元回归关系,结合克里金插值法对常规质量检测指标进行了反向预测分析,验证了模型的有效性。工程实例分析表明,针对我国南方地区广泛分布的花岗岩残积土填料,遵循基于碾压参数多元回归的连续压实控制方法,深圳机场T4扩建工程2-1区的常规质量检测均满足设计要求。基于碾压参数多元回归分析的连续压实质量监测能够有效控制工程碾压质量,从而为连续压实控制技术的实际应用提供有益参考。

关键词: 连续压实控制, 碾压参数, 多元回归分析, 克里金插值法

Abstract: In reality, the rolling parameters are often difficult to be strictly controlled to meet the application requirements of continuous compaction control technology, which greatly limits the scope of application and application effects of the technology. In order to adapt the dynamic variation of rolling parameters to the engineering practice, this paper performs multiple regression analysis for the rolling parameters, and uses Kriging interpolation method to estimate the target value/measured value of the continuous compaction control index. A continuous compaction monitoring model with the qualification rate of compaction as the quality evaluation index is proposed. The on-site rolling test is designed and carried out, and the multivariate regression relationship between compaction index and rolling parameters is established. The backward prediction analysis of conventional quality inspection index is conducted by combining Kriging interpolation method, which verifies the validity of the model. The continuous compaction control method based on the multivariate regression of rolling parameters is applied to the control of rolling construction quality of granite residual soil of District 2-1 of Shenzhen Airport T4 expansion project. The construction quality is verified to meet the design requirements by the conventional quality inspection method, demonstrating the effectiveness of the proposed method.

Key words: continuous compaction control, rolling parameters, multiple regression analysis, Kriging interpolation method

中图分类号: 

  • U 416
[1] 李术才,冯 啸,刘人太,张乐文,韩伟伟,郑 卓. 考虑渗滤效应的砂土介质注浆扩散规律研究[J]. , 2017, 38(4): 925-933.
[2] 张家玲,徐光辉,蔡 英. 连续压实路基质量检验与控制研究[J]. , 2015, 36(4): 1141-1146.
[3] 张勇慧 ,魏 倩 ,盛 谦 ,冷先伦 ,景 锋. 大岗山水电站地下厂房区三维地应力场反演分析[J]. , 2011, 32(5): 1523-1530.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
[1] 姚仰平,侯 伟. 土的基本力学特性及其弹塑性描述[J]. , 2009, 30(10): 2881 -2902 .
[2] 杜佐龙,黄茂松,李 早. 基于地层损失比的隧道开挖对临近群桩影响的DCM方法[J]. , 2009, 30(10): 3043 -3047 .
[3] 徐远杰,潘家军,刘祖德. 混凝土面板堆石坝的一种坝坡修整算法[J]. , 2009, 30(10): 3139 -3144 .
[4] 王 刚,蒋宇静,王渭明,李廷春. 新型数控岩石节理剪切渗流试验台的设计与应用[J]. , 2009, 30(10): 3200 -3209 .
[5] 赵成刚,蔡国庆. 非饱和土广义有效应力原理[J]. , 2009, 30(11): 3232 -3236 .
[6] 杨 强,刘耀儒,冷旷代,吕庆超,杨春和. 能源储备地下库群稳定性与连锁破坏分析[J]. , 2009, 30(12): 3553 -3561 .
[7] 潘 岳,王志强,李爱武. 岩石失稳破裂的综合刚度和综合能量准则[J]. , 2009, 30(12): 3671 -3676 .
[8] 余 俊,尚守平,李 忠,任 慧. 饱和土中桩水平振动引起土层复阻抗分析研究[J]. , 2009, 30(12): 3858 -3864 .
[9] 徐舜华,郑 刚,徐光黎. 循环荷载下砂土的剪切硬化边界面本构模型[J]. , 2010, 31(1): 1 -8 .
[10] 杨 磊,李术才,郭彦双,朱维申,林春金. 三维裂隙间距对砂浆材料力学特性的影响[J]. , 2010, 31(1): 32 -38 .