›› 2009, Vol. 30 ›› Issue (6): 1549-1554.

• 基础理论与实验研究 • 上一篇    下一篇

颗粒流强度折减法和重力增加法的边坡安全系数研究

周 健1, 2,王家全1, 2,曾 远3,贾敏才1, 2   

  1. 1. 同济大学 地下建筑与工程系,上海 200092;2. 同济大学 岩土及地下工程教育部重点实验室,上海 200092; 3. 中交第三航务工程勘察设计院有限公司,上海 200032
  • 收稿日期:2007-07-09 出版日期:2009-06-10 发布日期:2011-03-09
  • 作者简介:周健,男,1957年生,教授,博导,主要从事地基处理技术、土体细观力学模拟、环境岩土工程等方面的研究工作。
  • 基金资助:

    国家自然科学基金项目(No. 50578122)。

Slope safety factor by methods of particle flow code strength reduction and gravity increase

ZHOU Jian 1, 2,WANG Jia-quan 1, 2,ZENG Yuan3,JIA Min-cai 1,2   

  1. 1. Department of Geotechnical Engineering, Tongji University, Shanghai 200092, China; 2. Key Laboratory of Geotechnical and Underground Engineering of Ministry of Education, Tongji University, Shanghai, 200092, China; 3. CCCC Third Harbor Consultants Co.,Ltd., Shanghai 200032, China
  • Received:2007-07-09 Online:2009-06-10 Published:2011-03-09

关键词: 颗粒流, 离散元, 强度折减法, 重力增加法, 安全系数

Abstract:

trength reduction method and gravity increase method are introduced into the discrete element method for experimental study of slope safety factor. The research of slope stability is carried on by using particle flow code (PFC) software and adopting strength reduction and gravity increase methods, and the result is close to the calculation results of finite element method and slice method. The method opens a new way for calculating slope stability. If using PFC to solve the slope safety factor, slice method is not needed, namely it does not need to make an assumption of the inter-slice force. And at the same time, it does not need to assume the position and the shape of the sliding surface, because the particles adjust their positions according to their received contact forces; and finally, the shear failure of the slope occurs on the weakest surface of shear strength. Different viewpoints are put forward about inequality proportion reduction of strength reduction method, which provide new speculations for future research.

Key words: particle flow code(PFC), discrete element method, strength reduction method, gravity increase method, safety factor

中图分类号: 

  • TU 457
[1] 李剑, 陈善雄, 余飞, 姜领发, 戴张俊. 预应力锚索加固高陡边坡机制探讨[J]. 岩土力学, 2020, 41(2): 707-713.
[2] 孙博, 杨怀德, 谷玲, 刘跃, 唐碧华, 赵桂连, 张连明. 基于UDEC颗粒模型的不确定性分析[J]. 岩土力学, 2019, 40(9): 3679-3688.
[3] 张海娜, 陈从新, 郑 允, 孙朝燚, 张亚鹏, 刘秀敏, . 坡顶荷载作用下岩质边坡弯曲倾倒破坏分析[J]. 岩土力学, 2019, 40(8): 2938-2946.
[4] 陈峥, 何平, 颜杜民, 高红杰, 聂奥祥, . 超前支护下隧道掌子面稳定性极限上限分析[J]. 岩土力学, 2019, 40(6): 2154-2162.
[5] 吴关叶, 郑惠峰, 徐建荣. 三维复杂块体系统边坡深层加固条件下稳定性及 破坏机制模型试验研究[J]. 岩土力学, 2019, 40(6): 2369-2378.
[6] 王蕴嘉, 宋二祥. 堆石料颗粒形状对堆积密度及强度影响的 离散元分析[J]. 岩土力学, 2019, 40(6): 2416-2426.
[7] 陈 峥, 何 平, 颜杜民, 高红杰, . 考虑土拱效应的管棚合理间距计算方法[J]. 岩土力学, 2019, 40(5): 1993-2000.
[8] 魏 星, 张 昭, 王 刚, 张建民, . 饱和砂土液化后大变形机制的离散元细观分析[J]. 岩土力学, 2019, 40(4): 1596-1602.
[9] 吴顺川, 马 骏, 程 业, 成子桥, 李建宇, . 平台巴西圆盘研究综述及三维启裂点研究[J]. 岩土力学, 2019, 40(4): 1239-1247.
[10] 丛 怡, 丛 宇, 张黎明, 贾乐鑫, 王在泉, . 大理岩加、卸荷破坏过程的三维颗粒流模拟[J]. 岩土力学, 2019, 40(3): 1179-1186.
[11] 赵兰浩, 芮开天, 刘勋楠. 非均匀颗粒快速线性接触检测算法[J]. 岩土力学, 2019, 40(3): 1187-1196.
[12] 张成功, 尹振宇, 吴则祥, 金银富, . 颗粒形状对粒状材料圆柱塌落影响的 三维离散元模拟 [J]. 岩土力学, 2019, 40(3): 1197-1203.
[13] 顾晓强, 杨朔成, . 基于离散元数值方法的砂土小应变弹性特性探讨[J]. 岩土力学, 2019, 40(2): 785-791.
[14] 任晋岚, 陈曦, 王冬勇, 吕彦楠. 基于广义Hoek-Brown准则的瞬时线性化 强度折减技术[J]. 岩土力学, 2019, 40(12): 4865-4872.
[15] 郑光, 许强, 彭双麒. 岩质滑坡−碎屑流的运动距离计算公式研究[J]. 岩土力学, 2019, 40(12): 4897-4906.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
[1] 张文杰,陈云敏. 垃圾填埋场抽水试验及降水方案设计[J]. , 2010, 31(1): 211 -215 .
[2] 聂 影,栾茂田,唐小微,郭 莹,张振东1,宋岩新. 超固结黏土单调和耦合循环的剪切特性研究[J]. , 2009, 30(9): 2616 -2622 .
[3] 宫伟力,安里千,赵海燕,毛灵涛. 基于图像描述的煤岩裂隙CT图像多尺度特征[J]. , 2010, 31(2): 371 -376 .
[4] 王明年,郭 军,罗禄森,喻 渝,杨建民,谭忠盛. 高速铁路大断面黄土隧道深浅埋分界深度研究[J]. , 2010, 31(4): 1157 -1162 .
[5] 谭峰屹,姜志全,李仲秋,颜惠和. 附加质量法在昆明新机场填料压实密度检测中的应用研究[J]. , 2010, 31(7): 2214 -2218 .
[6] 卢 黎,张四平,张永兴,胡岱文,吴曙光. 压力型锚索力学机理现场试验研究[J]. , 2010, 31(8): 2435 -2440 .
[7] 王维铭,孙 锐,曹振中,袁晓铭. 国内外地震液化场地特征对比研究[J]. , 2010, 31(12): 3913 -3918 .
[8] 熊 炜,周曾辉,余开彪,吴亚平,罗 炜. 基于弯曲路径的混凝土超声层析成像及其改进[J]. , 2011, 32(2): 629 -634 .
[9] 许 江,唐晓军,李树春,杨红伟,陶云奇. 周期性循环载荷作用下岩石声发射规律试验研究[J]. , 2009, 30(5): 1241 -1246 .
[10] 胡海军,蒋明镜,赵 涛,彭建兵,李 红. 制样方法对重塑黄土单轴抗拉强度影响的初探[J]. , 2009, 30(S2): 196 -199 .