Rock and Soil Mechanics ›› 2023, Vol. 44 ›› Issue (1): 75-87.doi: 10.16285/j.rsm.2022.0267

• Fundamental Theroy and Experimental Research • Previous Articles     Next Articles

Experimental study on rock burst of granite with prefabricated single crack under true-triaxial stress condition with a free face

LUO Dan-ni1, 2, 3, LU Si-hang2, 3, SU Guo-shao2, 3, TAO Hong-hui1   

  1. 1. China Energy Engineering Group Guangxi Electric Power Design Institute Co., Ltd., Nanning, Guangxi 530007, China; 2. School of Civil and Architecture Engineering, Guangxi University, Nanning, Guangxi 530004, China; 3. Guangxi Provincial Engineering Research Center of Water Security and Intelligent Control for Karst Region, Guangxi University, Nanning, Guangxi 530004, China
  • Received:2022-03-08 Accepted:2022-04-24 Online:2023-01-16 Published:2023-01-12
  • Supported by:
    This work was supported by the China Postdoctoral Science Foundation (2018M633299) and the National Natural Science Foundation of China (52179125, 51709050).

Abstract: A rock burst experiment of granite with prefabricated single crack under the true-triaxial stress condition with a free face was carried out in this paper, and the rock burst process was monitored by high-speed camera system and acoustic emission (AE) system. The failure mode, strength, deformation and AE evolution characteristics of the rocks with different orientations of cracks were investigated. The relationships between crack orientation and rock burst process and ejection kinetic energy was analyzed. The rock burst mechanisms of the rocks with prefabricated single crack and the intact rocks were compared. The analysis of mechanical properties shows that, with the decrease of crack dip angle, the failure mode of rock samples generally changes from "internal shear and external splitting" to "Z-type oblique shear", and the weakening effect of cracks on rock strength is increasing. When the crack dip angle is less than 30°, the peak stress of rock is generally only about half that of the intact rock samples. The larger the length of the small-dip-angle crack is, the more obvious the splitting phenomenon of the rock slab will be, the slightly larger the rock burst pit will be, the larger the strength reduction amplitude will be, and the smaller the peak axial strain will be. The crack close to the free surface of rock samples will aggravate the splitting effect of the rock slab, large deformation and numerous cracks will occur in the plastic stage generally. When the crack is exposed and cuts off the free surface, it will be difficult to form rock burst pits. The analysis of rock burst process and ejection kinetic energy shows that, with the decrease of crack dip angle, the ejection kinetic energy of rock samples decreases significantly first and then increases slightly, the dip angle of 30° is the turning point of transformation. The closer the internal cracks of the rock sample are to the free surface, the smaller the ejection kinetic energy of the rock sample will be. The resin-filled crack greatly increases the ejection kinetic energy of rock sample, but not when cement fills cracks. The analysis of AE characteristics shows that, the longer length and the smaller dip angle of the crack are, the larger the time proportion of "quiet period" to rock burst process is, and the smaller the absolute energy proportion of rock burst in the post-peak stage is. If the crack is close to rock free surface, two "quiet periods" generally appear, and one more sudden rise will also appear in the AE absolute energy evolution curve. With the increase of crack dip angle, the duration of the initial fluctuation stage of b value of rock samples with crack becomes longer, the decrease rate of decline stage becomes larger, and the minimum b value point is closer to the rock burst time. In general, the mechanism of strain-type rock burst in rocks with cracks differs from that in intact rocks. The mechanism of strain-type rock burst in rocks with cracks can be classified into two types: shear-fracture type and tension-slabbing type. The research results provide a scientific basis for the mechanism analysis of rock burst disaster of fractured rocks and the early-warning by using AE technology.

Key words: rock burst, rock, crack, acoustic emission, ejection kinetic energy

CLC Number: 

  • TU 452
[1] ZHU Ze-qi, TIAN Kai-wei, XU Qi-zhong, CUI Lan, SHENG Qian, . Research on crack initiation mechanism and critical water pressure of basalt under hydraulic coupling [J]. Rock and Soil Mechanics, 2023, 44(增刊): 83-90.
[2] CHENG Shu-fan, ZENG Ya-wu, YE Yang, GAO Rui, . Slake durability test and mineral inclusion effect of Gansu red-bed clay rock [J]. Rock and Soil Mechanics, 2023, 44(增刊): 99-106.
[3] LUO Guo-li, ZHANG Ke, QI Fei-fei, ZHU Hui, ZHANG Kai, LIU Xiang-hua, . Size effect and anisotropy of mechanical properties of fractured rock masses based on 3D printing [J]. Rock and Soil Mechanics, 2023, 44(增刊): 107-116.
[4] WANG Bin, LI Jie-tao, WANG Jia-jun, CHEN Peng-lin, . Model tests on accumulation landslides induced by extreme rainfall [J]. Rock and Soil Mechanics, 2023, 44(增刊): 234-248.
[5] WANG Wen-dong, DENG Hua-feng, LI Jian-lin, FENG Yun-jie, LI Guan-ye, QI Yu, . Quantitative method of joint matching degree based on effective shear area [J]. Rock and Soil Mechanics, 2023, 44(增刊): 249-258.
[6] AN Ran, CHEN Xin, ZHANG Xian-wei, WANG Gang, GAO Hao-dong , . Dynamic evolution characteristics of microscopic cracks in steel slag- stabilized soil under uniaxial loading [J]. Rock and Soil Mechanics, 2023, 44(增刊): 300-308.
[7] SHANG De-lei, CHEN Jin-fan, CHU Peng, . Interaction between tensile crack and filling cemented fissure in rock [J]. Rock and Soil Mechanics, 2023, 44(增刊): 319-331.
[8] CHENG Shu-fan, ZENG Ya-wu, GAO Rui, LI Han, . Unrecoverable expansion characteristic of confined compressive clay-sulfate rock under drying-wetting cycles [J]. Rock and Soil Mechanics, 2023, 44(增刊): 332-340.
[9] CHENG Guang, FAN Wen, YU Ning-yu, JIANG Cheng-cheng, TAO Yi-quan, . Correlation between soil-water characteristics and microstructure of soil-rock mixture [J]. Rock and Soil Mechanics, 2023, 44(增刊): 365-374.
[10] CHEN Xiao-yu, YAO Qiang-ling, CHEN Sheng-yan, SHAN Chang-hao, LI Ying-hu, XU Qiang, YU Li-qiang, XIA Ze, ZHU Liu, LUO Hong-ye, . Experimental study on a loading beam main control crack model based on the instability characteristics of deep coal samples containing water [J]. Rock and Soil Mechanics, 2023, 44(增刊): 375-386.
[11] PENG Yang, GAO Yong-tao, WANG Wen-lin, FUER Kate, WEN Jian-min, ZHOU Yu, . Fracture mechanism of coal-rock combination under unilateral confinement compression [J]. Rock and Soil Mechanics, 2023, 44(增刊): 387-398.
[12] LIANG Jin-ping, JING Hao-yong, HOU Gong-yu, LI Xiao-rui, ZHANG Ming-lei, . Meso-damage and mechanical characteristics of surrounding rock under unloading condition [J]. Rock and Soil Mechanics, 2023, 44(增刊): 399-409.
[13] SONG Shuo, REN Fu-qiang, CHANG Lai-shan, . Experimental investigation on the failure and acoustic emission characteristics of coal-rock combination with prestressed bolt [J]. Rock and Soil Mechanics, 2023, 44(增刊): 449-460.
[14] LIU Xiao, ZHANG Xiao-jun, WEI Jin-zhu, HE Jun-ling, WANG Jing-tao, . Experimental study on the stress relaxation characteristics in straight-wall-top-arch roadway (tunnel) under cyclic loading and unloading [J]. Rock and Soil Mechanics, 2023, 44(增刊): 476-484.
[15] SUN Qian-cheng, XU Xiao, LIU Sheng, XU Zhi-hua, HE Yu-ming, GUO Hao-sen, ZHANG Guo-dong. . Borehole imaging characteristics and quality evaluation methods of clastic rock slope in Three Gorges Reservoir area [J]. Rock and Soil Mechanics, 2023, 44(增刊): 581-592.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
[1] HUANG Jian-hua,SONG Er-xiang. Research on mechanical properties of frozen curtain in large anchorage foundation pit engineering[J]. , 2009, 30(11): 3372 -3378 .
[2] WANG Guan-shi, LI Chang-hong, CHEN Bao-jun, LI Sh-ihai. Propagation law of stress wave in nonlinear structural surface medium[J]. , 2009, 30(12): 3747 -3752 .
[3] WANG Zhao-yang, XU Qiang, NI Wan-kui. Study of undisturbed loess stress-strain relation during CT test[J]. , 2010, 31(2): 387 -391 .
[4] DENG Qin,GUO Ming-wei,LI Chun-guang,GE Xiu-run. Vector sum method for slope stability analysis based on boundary element method[J]. , 2010, 31(6): 1971 -1976 .
[5] YAN Tie, LI Wei, BI Xue-liang. Research on effective stress model in porous media based on fractal method[J]. , 2010, 31(8): 2625 -2629 .
[6] LIU Jia, WANG Dong. Tension resistance and suction of plate anchor foundation in normally consolidated clay[J]. , 2009, 30(3): 735 -740 .
[7] ZHAO Shang-yi, ZHENG Ying-ren, LI An-hong, QIU Wen-ping, TANG Xiao-song. Application of multi-row embedded anti-slide piles to landslide of Wulong county government[J]. , 2009, 30(S1): 160 -164 .
[8] LIU Zhen-ping, HE Huai-jian, ZHU Fa-hua. Study of technology of fast 3D modeling and visualization based on borehole data[J]. , 2009, 30(S1): 260 -266 .
[9] WEI Hou-zhen, YAN Rong-tao, WEI Chang-fu, WU Er-lin, CHEN Pan, TIAN Hui-hui. Summary of researches for phase-equilibrium of natural gas hydrates in bearing sediments[J]. , 2011, 32(8): 2287 -2294 .
[10] WANG Guo-cui, YANG Min. Nonlinear analysis of laterally loaded piles in sand[J]. , 2011, 32(S2): 261 -267 .