Abstract: This paper describes a high input impedance preamplifier ,a main amplifier ,including its specification and the circuits theories .An acceleration measurement system consist of the piezoelectric acceleration 、preamplifier、cable 、main amplifier and oscilloscope for measureing the acceleration of vibration due to explosion .The features of the system are :1.good stability ,2.small zero shift ,3.The preamplifier is a new circuit which consists of four transistors 3DG6C,3DG4E. Its input impedance is as high as 1500MΩ and is able to undertake a high instantaneous impulse voltage ,4.There is no power supply set near the preamplifier .The signal transmiting cable is also the power supply cable so that the transmiting characteristic is very well .when the cable length is varied from 1 meter to 1000 meters ,the frequency response of system will not change .The decrement of output amplitude is less than 6% etc.