›› 2018, Vol. 39 ›› Issue (10): 3703-3716.doi: 10.16285/j.rsm.2017.2138

• Geotechnical Engineering • Previous Articles     Next Articles

Research progress on safety risk management for large scale geotechnical engineering construction in China

XIONG Zi-ming1, 2, LU Hao1, WANG Ming-yang1, 2, QIAN Qi-hu1, RONG Xiao-li2   

  1. 1. State Key Laboratory of Disaster Prevention and Mitigation of Explosion and Impact, Army Engineering University of PLA, Nanjing, Jiangsu 210007, China; 2. School of Mechanical Engineering, Nanjing University of Science and Technology, Nanjing, Jiangsu 210094, China
  • Received:2017-10-25 Online:2018-10-11 Published:2018-11-04
  • Supported by:
    This work was supported by the National Program on Key Basic Research Project of China (973 Program) (2013CB036005) and the National Natural Science Foundation of China (51479106).

Abstract: Geotechnical engineering in China including urban rail transit, highway, high-speed rail construction, hydraulic engineering is featured by large scale, long construction period, complex operation and frustrating situations regarding project safety. Various accidents have been reported from time to time, resulting in serious social impact and huge economic loss. This paper presents the main progress in the safety risk management of geotechnical engineering in China from 2010 to 2017, including (1) national major scientific and technological projects, achievement awards, specifications for safety risk management; (2) safety risk analysis and evaluation method of large geotechnical engineering; (3) safety risk monitoring and early warning of large-scale geotechnical engineering construction; (4) information technology and platform of construction safety risk management of large geotechnical engineering; (5) the intelligent analysis and control of construction safety of large geotechnical engineering. Based on the analysis of the above research progress in China, new challenges in the safety risk management for geotechnical engineering are identified as follows: (1) application and promotion of quantitative risk assessment theory and technology; (2) risk decision theory; (3) the implementation of the whole-process safety risk management plan; (4) shared platform for the construction of safety accidents in geotechnical engineering; (5) analysis and control of geotechnical engineering parameters based on big data mining technology; (6) research and construction of intelligent geotechnical engineering.

Key words: geotechnical engineering, risk management, risk analysis, risk evaluation, risk monitoring, risk early warning

CLC Number: 

  • TU 432
[1] HE Jing-bin, FENG Zhong-ju, DONG Yun-xiu, HU Hai-bo, LIU Chuang, GUO Sui-zhu, ZHANG Cong, WU Min, WANG Zhen, . Dynamic response of pile foundation under pile-soil-fault coupling effect in meizoseismal area [J]. Rock and Soil Mechanics, 2020, 41(7): 2389-2400.
[2] SHI Xu-chao, SUN Yun-de. Analysis of the evolution of excess pore water pressure in soft soil under linear unloading [J]. Rock and Soil Mechanics, 2020, 41(4): 1333-1338.
[3] TIAN Wei, WANG Zhen, ZHANG Li, YU Chen. Mechanical properties of 3D printed rock samples subjected to high temperature treatment [J]. Rock and Soil Mechanics, 2020, 41(3): 961-969.
[4] ZHAO Qiang, JIAO Yu-yong, ZHANG Xiu-li, XIE Bi-ting, WANG Long, HUANG Gang-hai, . Explicit time integration based spherical DDA calculation method [J]. Rock and Soil Mechanics, 2019, 40(11): 4515-4522.
[5] DONG Zhi-hong, DING Xiu-li, HUANG Shu-ling, WU Ai-qing, CHEN Sheng-hong, ZHOU Zhong, . Analysis of ageing-stress characteristics and long-term bearing risk of anchor cable for a large cavern in high geo-stress area [J]. Rock and Soil Mechanics, 2019, 40(1): 351-362.
[6] ZHANG Xiao-yan, ZHANG Li-xiang, LI Ze,. Reliability analysis of soil slope based on upper bound method of limit analysis [J]. , 2018, 39(5): 1840-1849.
[7] FAN Wen-liang, WANG Yu-le, WEI Qi-ke, YANG Peng-chao, LI Zheng-liang, . Improved fourth-moment method for reliability analysis of geotechnical engineering [J]. , 2018, 39(4): 1463-1468.
[8] HUANG Ming-hua, ZHAO Ming-hua, CHEN Chang-fu. Influence of anchorage length on stress in bolt and its critical value calculation [J]. , 2018, 39(11): 4033-4041.
[9] FANG Yan-bing, SU Yong-hua, XIAO Wang, LIANG Bin. Non-probabilistic reliability model for implicit performance function based on subinterval method [J]. , 2017, 38(4): 1171-1178.
[10] WANG Hao, DOU Hong-qiang, XIE Yong-ning, LIAO Xiao-ping, . A technical framework for life cycle risk assessment and management of highway cut slopes [J]. , 2017, 38(12): 3505-3516.
[11] YAN Shu-wang, LIN Shu, HUO Zhi-liang, CHU Jian, GUO Wei,. Coupled Eulerian-Lagrangian finite element analysis of suction caisson penetration processes under hydraulic pressure [J]. , 2017, 38(1): 247-252.
[12] FU Xiao-dong,SHENG Qian,ZHANG Yong-hui,LENG Xian-lun, . High efficient algorithms for solving linear equations in discontinuous deformation analysis [J]. , 2016, 37(4): 1171-1178.
[13] ZHANG You-liang, TAN Fei, ZHANG Li-ren, SHI Ming-ming. Scalable parallel computation for finite element model with hundreds of millions of elements in geotechnical engineering [J]. , 2016, 37(11): 3309-3316.
[14] ZHANG Lei , TANG Xiao-song , LI Dian-qing , CAO Zi-jun , . System reliability analysis of geotechnical structures based on the Copula function [J]. , 2016, 37(1): 193-202.
[15] DONG Wei-xin, WANG Xiang-nan, WANG Yuan, YU Yu-zhen. Application of three-dimensional transitional isoparametric elements to finite element analysis of geotechnical engineering problems [J]. , 2015, 36(5): 1455-1462.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!