岩土力学 ›› 2023, Vol. 44 ›› Issue (8): 2432-2444.doi: 10.16285/j.rsm.2022.1391

• 数值分析 • 上一篇    下一篇

锥形聚晶金刚石复合片齿破岩特征与机制研究

熊超1, 2，黄中伟2，王立超3，史怀忠2，赫文豪2，陈振良2，李根生2   

  1. 1. 中国石油大学（北京）机械与储运工程学院，北京 102249；2. 中国石油大学（北京）油气资源与工程全国重点实验室，北京 102249； 3. 中国石油国际勘探开发有限公司，北京 102249
  • 收稿日期:2022-09-08 接受日期:2022-10-23 出版日期:2023-08-21 发布日期:2023-08-21
  • 通讯作者: 黄中伟，男，1972年生，博士，教授，主要从事油气井流体力学与完井增产技术方面的研究。E-mail：huangzw@cup.edu.cn E-mail:xiongc@cup.edu.cn
  • 作者简介:熊超，男，1993年生，博士（后），主要从事异形PDC齿破岩机制及干热岩钻井提速技术方面的研究。
  • 基金资助:
    国家自然科学基金项目（No. U19B6003-05）；国家重点研发计划项目（No. 2019YFA0708302）；中国石油大学（北京）科研基金（No.2462023SZBH003）；北京高校卓越青年科学家计划项目（No. BJJWZYJH01201911414038）。

Rock breaking characteristics and mechanism of conical polycrystalline diamond compact cutter

XIONG Chao1, 2, HUANG Zhong-wei2, WANG Li-chao3, SHI Huai-zhong2, HE Wen-hao2, CHEN Zhen-liang2, LI Gen-sheng2   

  1. 1. College of Mechanical and Transportation Engineering, China University of Petroleum (Beijing), Beijing 102249, China; 2. National Key Laboratory of Petroleum Resources and Engineering, China University of Petroleum (Beijing), Beijing, 102249, China; 3. China National Oil and Gas Exploration and Development Co. Ltd., Beijing 102249, China
  • Received:2022-09-08 Accepted:2022-10-23 Online:2023-08-21 Published:2023-08-21
  • Supported by:
    This work was supported by the National Natural Science Foundation of China (U19B6003-05), the National Key Research and Development Program of China (2019YFA0708302), the Science Foundation of China University of Petroleum, Beijing (No.2462023SZBH003), and the Beijing Outstanding Young Scientist Program (BJJWZYJH01201911414038).

PDF (Chinese)

295

摘要： 锥形聚晶金刚石复合片（polycrystalline diamond compact，PDC）齿是一种具有较强抗冲击性和耐磨性的新型PDC齿，在坚硬、强研磨性和软硬交错地层中取得了非常好的钻井提速效果。为了揭示锥形齿破碎硬岩机制，开展锥形齿破碎花岗岩试验与数值模拟研究，分析了切削深度和前倾角对锥形齿切削力和破岩比能的影响规律，采用高速摄像机和透明K9玻璃观测了锥形齿作用下岩屑形成过程及微裂纹萌生与扩展过程，通过数值模拟分析了破岩过程中岩石应力响应与损伤演化特性，结合对切削槽和大尺寸块体岩屑表面形貌及断口微观特征分析，建立了锥形齿破碎花岗岩机制模型。结果表明，锥形齿破碎花岗岩的过程可以分为挤压成核和块体崩裂两个阶段，前倾角对岩石破碎过程影响较小，切削深度的影响显著；锥形齿周围的裂纹主要由压实核、纵向裂纹和横向裂纹组成，纵向裂纹和横向裂纹扩展的最大深度分别为切削深度的6.69倍和4.53倍；齿尖周围压应力集中，岩石发生压剪破坏，压应力区外围形成弧形条带状拉应力区，并在齿尖及压应力区边界处诱导出拉伸微裂纹；微裂纹向齿前扩展形成弧形拉伸主裂纹，发生块体岩屑崩裂，提高破岩效率，向岩石内部扩展劣化岩石强度，形成底部损伤区，提高后续破岩效率。

关键词: 锥形PDC齿, 花岗岩, 破岩过程, 破岩机制

Abstract: Conical polycrystalline diamond compact (PDC) cutter is a new type of PDC cutter with high impact and wear resistance, which has a very good drilling effect in hard, strong abrasion, and soft-hard interbedded formations. In order to reveal the hard-rock breaking mechanism of conical PDC cutters, the laboratory test and numerical simulation on the granite broken by the conical PDC cutter were carried out. The influence law of cutting depth and front rake angle on cutting force and rock breaking specific energy of the conical PDC cutter was analyzed. In the laboratory test, a high-speed camera and transparent K9 glass were used to observe the formation process of cuttings and the initiation and propagation of microcracks under the action of conical PDC cutters. The stress response and damage evolution characteristics during the rock breaking process were analyzed by numerical simulation. The surface morphology and fracture microscopic characteristics of cutting grooves and large-size cuttings were analyzed, and the mechanical model of conical PDC cutters to break granite was established. The results show that the granite breaking process can be divided into two stages: crushing and chipping. The effect of the front rake angle on the rock breaking process is relatively small, while the influence of cutting depth is significant. The cracks around the conical PDC cutter are mainly composed of compaction nucleation, longitudinal crack and transverse crack. The maximum propagation depth of the longitudinal and transverse cracks is 6.69 and 4.53 times the cutting depth, respectively. The compressive stress around the cutter tip is concentrated, the shear-compression failure occurs, an arc-shaped strip-like tensile stress zone is formed at the periphery of the compressive stress zone, and the tensile micro-cracks are induced at the boundary of the cutter tip and compressive stress zone. When the micro-crack propagates to the front of conical PDC cutters to form an arc-shaped tensile main crack, the block debris cracking occurs, which improves the rock breaking efficiency. Meanwhile, the tensile micro-cracks propagate to the rock inside and deteriorate rock strength, a bottom damaged area is formed, which improves the rock breakage efficiency of the subsequent cutting.

Key words: conical polycrystalline diamond compact (PDC) cutter, granite, rock breaking process, rock breaking mechanism

中图分类号: TE 242
[1] 高品红, 高晨博, 彭成威, 刘飞禹, . 降雨作用下花岗岩残积土边坡模型试验及离散元分析[J]. 岩土力学, 2025, 46(5): 1632-1642.
[2] 尚召伟, 孔令伟, 鄢俊彪, 高志傲, 王斐, 黎澄生, . 非饱和花岗岩残积土的小应变剪切模量特性与其持水特征曲线确定方法[J]. 岩土力学, 2025, 46(4): 1131-1140.
[3] 薛熠, 杨博鹍, 刘勇, 孙强, 张云, 曹正正, . 液氮循环冷冲击作用下高温花岗岩I型断裂特性研究[J]. 岩土力学, 2025, 46(2): 422-436.
[4] 周长冰, 闫俊豪, 李小双, . 花岗岩热破裂裂隙动态演化特性数值模拟研究[J]. 岩土力学, 2024, 45(S1): 694-704.
[5] 王贵宾, 刘桓兑, 唐明豪, 杨春和, 陈世万, . 复杂应力路径下的花岗岩洞室开挖损伤区研究[J]. 岩土力学, 2024, 45(9): 2539-2553.
[6] 王智德, 钱梦凡, 李杰, 司莹莹, 江俐敏, . 高应变率冲击荷载下节理花岗岩损伤机制研究[J]. 岩土力学, 2024, 45(7): 1917-1928.
[7] 王智德, 司莹莹, 李杰, 钱梦凡, 安佳兴, . 低应变率冲击荷载下节理花岗岩的动力响应规律[J]. 岩土力学, 2024, 45(6): 1755-1762.
[8] 袁伟, 李建春, 李星, . 花岗岩冲击剪切力学行为的试验及数值模拟研究[J]. 岩土力学, 2024, 45(6): 1675-1685.
[9] 刘新荣, 张吉禄, 周小涵, 刘煜宇, 刘瀚之, . 考虑轴向应力作用的贯通裂隙岩体变形及渗流特性研究[J]. 岩土力学, 2024, 45(12): 3596-3612.
[10] 张塑彪, 张帆, 李康文, 马双泽. 高温对不同粒径花岗岩剪切特性影响研究[J]. 岩土力学, 2024, 45(10): 2981-2993.
[11] 王洪建, 崔炎宗, 袁广祥, 赵菲, 张翼宇, 黄志全. 基于单轴压缩试验的不同风化程度花岗岩分形特征分析[J]. 岩土力学, 2023, 44(8): 2249-2265.
[12] 王春, 胡慢谷, 王成, . 热−水−力作用下圆孔花岗岩的动态损伤特征及结构模型[J]. 岩土力学, 2023, 44(3): 741-756.
[13] 舒荣军, 孔令伟, 周振华, 简涛, 李甜果, . 卸荷-增孔压条件下花岗岩残积土的力学特性[J]. 岩土力学, 2023, 44(2): 473-482.
[14] 黎澄生, 孔令伟, 舒荣军, 刘智军, 张炳鑫, . 花岗岩残积土剪切带上的细观结构损伤规律[J]. 岩土力学, 2023, 44(11): 3203-3212.
[15] 胡训健, 卞康, 刘建, 谢正勇, 陈明, 李冰洋, 岑越, . 离散裂隙网络对岩石力学性质和声发射特性 影响的颗粒流分析[J]. 岩土力学, 2022, 43(S1): 542-552.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
版权所有 © 《岩土力学》编辑部
地址：湖北武汉武昌小洪山中国科学院武汉岩土力学研究所(430071)　邮编：200042　电话：027-87198484　E-mail: ytlx@whrsm.ac.cn
本系统由北京玛格泰克科技发展有限公司设计开发