土体各向异性边界面模型隐式算法在ABAQUS软件中的实现

›› 2012, Vol. 33 ›› Issue (1): 307-313.

土体各向异性边界面模型隐式算法在ABAQUS软件中的实现

钦亚洲¹，孙钧^{1, 2}

1. 同济大学岩土及地下工程教育部重点实验室，上海 200092；2. 杭州丰强土建工程研究院，杭州 310006

收稿日期:2011-04-24 出版日期:2012-01-10 发布日期:2012-01-17
作者简介:钦亚洲，男，1973年生，博士研究生，主要从事岩土、地下方面的研究工作。

On implicit integration of anisotropic bounding surface model for soils in ABAQUS software

QIN Ya-zhou¹，SUN Jun^{1, 2}

1. Key Laboratory of Geotechnical and Underground Engineering of Ministry of Education, Tongji University, Shanghai 200092, China; 2. Hangzhou Fengqiang Civil Engineering Research Institute, Hangzhou 310006, China

Received:2011-04-24 Online:2012-01-10 Published:2012-01-17

摘要/Abstract

摘要： 基于Wheeler土体各向异性旋转硬化法则，结合边界面理论，构造一个能够反映土体初始各向异性及加载后应力诱发各向异性的边界面本构模型，并借助ABAQUS软件提供的UMAT子程序接口，采用隐式积分算法——图形返回算法实现。通过对正常固结状态下（OCR=1）高岭土试样三轴不排水剪切试验进行模拟，并将模拟结果与ABAQUS自带的修正剑桥模型模拟结果进行了比较分析，表明本模型的模拟结果能够反映土体在偏压加载过程中产生的各向异性现象。在此基础上，采用本模型对中等超固结（OCR=4）高岭土试样三轴不排水剪切试验进行模拟，并再次与ABAQUS自带的修正剑桥模型模拟结果进行比较，表明本模型能够较好地反映中等超固结土在小应变情况下的非线性特性。相比于经典弹塑性模型，如修正剑桥模型，本模型的模拟结果更符合中等超固结土的变形特性。

关键词: 土体各向异性边界面模型, 图形返回算法, ABAQUS软件, UMAT接口

Abstract: An anisotropic bounding surface model for cohesive soils is developed based on Wheeler’s rotational hardening law (S-CLAY1 Model)，which is integrated in return mapping algorithm. The UMAT subroutine of the developed model is programmed in ABAQUS software. With the developed model, the numerical simulation of undrained triaxial compression test for normal consolidated kaolin clay (OCR =1) is implemented, and the numerical results of the developed model compared with the Modified Cam-clay model in ABAQUS. The results show that the developed anisotropic bounding surface model could efficiently depict the stress-strain behaviors and change of excess pore pressure of normally consolidated clay. Meanwhile the developed model could reproduce anisotropic behaviors of soft clay under loading conditions. Then the similar numerical simulation for over consolidated kaolin clay (OCR =4) is implemented. The results show that the developed model could also efficiently depict nonlinear stress-strain behaviors of over consolidated clay under small deformation conditions.

Key words: anisotropy bounding surface model for soil, return mapping algorithm, ABAQUS software, UMAT interface

中图分类号:

TU 443

钦亚洲，孙钧. 土体各向异性边界面模型隐式算法在ABAQUS软件中的实现[J]. , 2012, 33(1): 307-313.

QIN Ya-zhou ，SUN Jun. On implicit integration of anisotropic bounding surface model for soils in ABAQUS software[J]. , 2012, 33(1): 307-313.

参考文献

Metrics

Viewed

Full text

Abstract

Cited

Shared

Discussed

本文评价

推荐阅读 10

[1]	黄建华，宋二祥. 大型锚碇基础围护工程冻结帷幕力学性态研究[J]. , 2009, 30(11): 3372 -3378 .
[2]	王观石，李长洪，陈保君，李世海. 应力波在非线性结构面介质中的传播规律[J]. , 2009, 30(12): 3747 -3752 .
[3]	王朝阳，许强，倪万魁. 原状黄土CT试验中应力-应变关系的研究[J]. , 2010, 31(2): 387 -391 .
[4]	邓琴，郭明伟，李春光，葛修润. 基于边界元法的边坡矢量和稳定分析[J]. , 2010, 31(6): 1971 -1976 .
[5]	万少石，年廷凯，蒋景彩，栾茂田. 边坡稳定强度折减有限元分析中的若干问题讨论[J]. , 2010, 31(7): 2283 -2288 .
[6]	闫铁，李玮，毕雪亮. 基于分形方法的多孔介质有效应力模型研究[J]. , 2010, 31(8): 2625 -2629 .
[7]	刘嘉，王栋. 正常固结黏土中平板锚基础的吸力和抗拉力[J]. , 2009, 30(3): 735 -740 .
[8]	赵尚毅，郑颖人，李安洪，邱文平，唐晓松，徐俊. 多排埋入式抗滑桩在武隆县政府滑坡中的应用[J]. , 2009, 30(S1): 160 -164 .
[9]	刘振平，贺怀建，朱发华. 基于钻孔数据的三维可视化快速建模技术的研究[J]. , 2009, 30(S1): 260 -266 .
[10]	魏厚振，颜荣涛，韦昌富，吴二林，陈盼，田慧会. 含天然气水合物沉积物相平衡问题研究综述[J]. , 2011, 32(8): 2287 -2294 .