岩土力学 ›› 2019, Vol. 40 ›› Issue (S1): 374-380.doi: 10.16285/j.rsm.2018.1882

• 岩土工程研究 • 上一篇    下一篇

基于改进遗传算法的岩体结构面产状聚类分析

崔学杰,晏鄂川,陈 武   

  1. 中国地质大学(武汉) 工程学院,湖北 武汉 430074
  • 收稿日期:2018-10-27 出版日期:2019-08-01 发布日期:2019-08-17
  • 通讯作者: 晏鄂川,男,1969年生,博士,教授,主要从事岩体稳定性与地质灾害防治研究。E-mail:yecyec6970@163.com E-mail:1229054139@qq.com
  • 作者简介:崔学杰,男,1990年生,博士研究生,主要从事岩体稳定性与地质灾害防治研究
  • 基金资助:
    国家自然科学基金项目(No.41172282,No.41672313)

Cluster analysis of discontinuity occurrence of rock mass based on improved genetic algorithm

CUI Xue-jie, YAN E-chuan, CHEN Wu   

  1. Faculty of Engineering, China University of Geosciences, Wuhan,Hubei 430074, China
  • Received:2018-10-27 Online:2019-08-01 Published:2019-08-17
  • Supported by:
    This work was supported by the National Natural Science Foundation of China(41172282, 41672313).

摘要: 根据产状对结构面进行分组是研究岩体结构的重要环节。传统分组方法通常需要依靠地质经验,缺乏客观性,而现有的聚类方法也存在一些缺陷。基于变长度字符串遗传算法,提出了一种改进的K均值算法,实现了岩体结构面产状的自动聚类。该方法的核心思想是使用遗传算法为K均值算法选择恰当的聚类中心,克服了K均值(K-means)算法受初始聚类中心影响,易收敛于局部最优解的缺陷。由于使用了变长度字符串,该方法能够在聚类过程中自动确定最佳结构面组数,同时提供最优的分组结果。针对产状数据,提出了一种新的变异方法,该方法利用C++语言实现,并被应用于浙江省某地下水封洞库结构面产状数据的分析,得到较为合理的分组结果,证明了该方法的有效性。

关键词: 岩体结构面, 产状数据, K均值算法, 变长度字符串遗传算法

Abstract: Grouping structural planes based on their occurrences is an important way in analyzing the structure characteristics of rock mass. Traditional classification methods usu CUI Xue-jie, YAN E-chuan, CHEN Wu ally greatly rely on geological experience of researchers, which is lack of objectivity. The powerful clustering methods, however, also have drawbacks. In this paper, based on variable length string genetic algorithm, an improved K-means clustering method was proposed, making the automatic clustering of discontinuity occurrence of rock mass available. The essence of the proposed method is to select appropriate initial cluster centers for K-means algorithm applying the genetic algorithm. It overcomes the limitation that the K-means algorithm is usually affected by the initial cluster center and easily converges to the local optimal solution. The application of variable length strings in the improved algorithm of classification, however, can not only automatically determine the number of the optimal structural plane groups during the clustering process, but also provide optimal grouping results. In addition, a new mutation algorithm is proposed based on the occurrence data. It is realized in C++ and is applied in analyzing the occurrence of structural planes in an underground water-sealing rock caverns located at Zhejiang province, China. Reasonable classification results are achieved, proving the applicability of the proposed approach in this paper.

Key words: rock mass discontinuity, occurrence data, K-means algorithm, variable length string genetic algorithm

中图分类号: 

  • TU 452
[1] 洪陈杰, 黄曼, 夏才初, 罗战友, 杜时贵, . 岩体结构面各向异性变异系数的尺寸效应研究[J]. 岩土力学, 2020, 41(6): 2098-2109.
[2] 葛云峰, 钟鹏, 唐辉明, 赵斌滨, 王亮清, 夏丁, 仇雅诗, 李鹏飞, 张莉, 闻炼, 曹天赐, . 基于钻孔图像的岩体结构面几何信息智能测量[J]. 岩土力学, 2019, 40(11): 4467-4476.
[3] 葛云峰,陈 勇,王亮清,霍少磊,王昌硕,夏 丁,钟 鹏,. 基于点云数据对齐技术的岩体结构面三维吻合度求取[J]. , 2017, 38(11): 3385-3393.
[4] 韩增强 ,王川婴 ,施华堂 ,丁 刚 ,胡 胜 ,王益腾,. 空间坐标系下地下岩体结构面数学描述方法初探[J]. , 2016, 37(S2): 410-414.
[5] 王智德 ,夏元友 ,夏国邦 ,李敬东 ,陈 东,. 顺层岩质边坡结构面抗剪强度特性试验研究[J]. , 2015, 36(S2): 193-200.
[6] 宋腾蛟,陈剑平,张 文,项良俊,杨俊辉. 基于人工蜂群算法的岩体结构面多参数优势分组研究[J]. , 2015, 36(3): 861-868.
[7] 雍 睿,唐辉明,胡新丽,李长冬,黄 磊. 结构面抗剪强度参数线性拟合方法适用性研究[J]. , 2012, 33(S2): 118-124.
[8] 徐 磊,任青文. 岩体结构面新型本构模型研究[J]. , 2011, 32(S1): 217-224.
[9] 文志杰,石永奎,崔增娣,王荣超. 全长黏结型预应力锚杆受力特性研究[J]. , 2010, 31(S1): 177-181.
[10] 刘艳章 ,盛建龙 ,葛修润 ,王水林 . 基于岩体结构面分布分形维的岩体质量评价[J]. , 2007, 28(5): 971-975.
[11] 张必勇,徐 俊. 巴东县杨家坪煤炭采空区岩体力学性质试验研究[J]. , 2005, 26(S2): 119-122.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!