›› 2012, Vol. 33 ›› Issue (S2): 118-124.

• Fundamental Theroy and Experimental Research • Previous Articles     Next Articles

Applicability study of linear fitting method of shear strength parameters of rock mass discontinuities

YONG Rui,TANG Hui-ming,HU Xin-li,LI Chang-dong,HUANG Lei   

  1. Faculty of Engineering, China University of Geosciences, Wuhan 430074, China
  • Received:2012-05-13 Online:2012-11-22 Published:2012-12-11

Abstract: Due to the importance of study of mechanical parameters of rock mass discontinuities, four shear strength parameters linear regression methods, i.e. least square method, point center method, random-fuzzy method and reliability method, were carried out to conduct the comparison and theoretical analysis. An improved algorithm with rigorous solving process and higher calculation accuracy was proposed based on the traditional point center method. The optimized mean and standard deviation assignment method of shear strength parameters c, of rock mass discontinuities was presented to ensure the accuracy of initial assigned parameter with JC method based on reliability theory. An example of Jiweishan landslide in Wulong County was taken to explain the applicability of the above four methods under different data conditions of rock discontinuities. The result indicates that the applicability of four methods depends on the divergence and volume of the data. Each method of the four can be directly applied for the linear regression analysis of the shear strength parameters of rock discontinuities when the data is under good linear relationship. However, the point center method is not available anymore when the data is discrete; and the reasonable method should be determined according to the engineering requirements, exceptional value and convergence conditions.

Key words: rock mass discontinuities, shear strength parameters, direct shear test, linear fitting, applicability

CLC Number: 

  • TU 45
[1] WANG Pei-tao, HUANG Zheng-jun, REN Fen-hua, ZHANG Liang, CAI Mei-feng, . Research on direct shear behaviour and fracture patterns of 3D-printed complex jointed rock models [J]. Rock and Soil Mechanics, 2020, 41(1): 46-56.
[2] HE Peng-fei, MA Wei, MU Yan-hu, HUANG Yong-ting, DONG Jian-hua, . Experimental analysis of interfacial shear behavior of loess-mortar block and construction of constitutive model [J]. Rock and Soil Mechanics, 2019, 40(S1): 82-90.
[3] CHAI Wei, LONG Zhi-lin, KUANG Du-min, CHEN Jia-min, YAN Chao-ping. Effect of shear rate on shear strength and deformation characteristics of calcareous sand in direct shear test [J]. Rock and Soil Mechanics, 2019, 40(S1): 359-366.
[4] LI Xian, WANG Shi-ji, HE Bing-hui, SHEN Tai-yu, . Permeability condition of soil suitable for MICP method [J]. Rock and Soil Mechanics, 2019, 40(8): 2956-2964.
[5] LI Wen-Xuan, BIAN Shi-hai , LI Guo-ying, WU Jun-jie, . Interface model of coarse-grained soils and its application in earth rock dam [J]. Rock and Soil Mechanics, 2019, 40(6): 2379-2388.
[6] CHEN Guo-qing, TANG Peng, LI Guang-ming, ZHANG Guang-ze, WANG Dong, . Analysis of acoustic emission frequency spectrum characteristics and main fracture precursor of rock bridge in direct shear test [J]. Rock and Soil Mechanics, 2019, 40(5): 1649-1656.
[7] CHEN Wen-wu, LIU Wei, WANG Juan, SUN Guan-ping, WU Wei-jiang, . Relationship between saturation degree and B value for loess [J]. Rock and Soil Mechanics, 2019, 40(3): 834-842.
[8] ZHOU Hui, CHENG Guang-tan, ZHU Yong, CHEN Jun, LU Jing-jing, CUI Guo-jian, YANG Pin-qing, . Experimental study of shear deformation characteristics of marble dentate joints [J]. Rock and Soil Mechanics, 2019, 40(3): 852-860.
[9] LI Lian-xiang, LIU Jia-dian, LI Ke-jin, HUANG Heng-li, JI Xiang-kai, . Study of parameters selection and applicability of HSS model in typical stratum of Jinan [J]. Rock and Soil Mechanics, 2019, 40(10): 4021-4029.
[10] XU Nian-chun, WU Tong-qing, PI Hai-yang, YOU Lei, WU Yue,. Inversion of shear strength of soil based on flexible bearing plate loading test [J]. , 2018, 39(S1): 227-234.
[11] CUI Guo-jian, ZHANG Chuan-qing, LIU Li-peng, ZHOU Hui, CHENG Guang-tan,. Study of effect of shear velocity on mechanical characteristics of bolt-grout interface [J]. , 2018, 39(S1): 275-281.
[12] WEI Kuang-min , CHEN Sheng-shui, LI Guo-ying, WU Jun-jie, . Influence of contact effect between dam body and dam foundation on behaviours of high concrete faced rockfill dam built in steep valleys [J]. , 2018, 39(9): 3415-3424.
[13] CHEN Chen, LENG Wu-ming, YANG Qi, JIN Zi-hao, NIE Ru-song, QIU Jun,. Experimental study of mechanical properties of concrete pile-slurry-sand interface [J]. , 2018, 39(7): 2461-2472.
[14] ZHAO Kun, CHEN Wei-zhong, ZHAO Wu-sheng, YANG Dian-sen,SONG Wan-peng, LI Can, MA Shao-sen, . Direct shear test and numerical simulation for mechanical characteristics of the contact surface between the lining and shock absorption layer in underground engineering [J]. , 2018, 39(7): 2662-2670.
[15] LIU Fei-yu, SHI Jing, WANG Jun, CAI Yuan-qiang,. Dynamic shear behavior of interface for clay reinforced with geogrid encapsulated in thin layers of sand [J]. , 2018, 39(6): 1991-1998.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
[1] LIU Xiao-wen,CHANG Li-jun,HU Xiao-rong. Experimental research of matric suction with water content and dry density of unsaturated laterite[J]. , 2009, 30(11): 3302 -3306 .
[2] HUANG Jian-hua,SONG Er-xiang. Research on mechanical properties of frozen curtain in large anchorage foundation pit engineering[J]. , 2009, 30(11): 3372 -3378 .
[3] WANG Guan-shi, LI Chang-hong, CHEN Bao-jun, LI Sh-ihai. Propagation law of stress wave in nonlinear structural surface medium[J]. , 2009, 30(12): 3747 -3752 .
[4] WANG Zhao-yang, XU Qiang, NI Wan-kui. Study of undisturbed loess stress-strain relation during CT test[J]. , 2010, 31(2): 387 -391 .
[5] DENG Qin,GUO Ming-wei,LI Chun-guang,GE Xiu-run. Vector sum method for slope stability analysis based on boundary element method[J]. , 2010, 31(6): 1971 -1976 .
[6] WAN Shao-shi, NIAN Ting-kai, JIANG Jing-cai, LUAN Mao-tian. Discussion on several issues in slope stability analysis based on shear strength reduction finite element methods (SSR-FEM)[J]. , 2010, 31(7): 2283 -2288 .
[7] YAN Tie, LI Wei, BI Xue-liang. Research on effective stress model in porous media based on fractal method[J]. , 2010, 31(8): 2625 -2629 .
[8] LIU Jia, WANG Dong. Tension resistance and suction of plate anchor foundation in normally consolidated clay[J]. , 2009, 30(3): 735 -740 .
[9] ZHAO Shang-yi, ZHENG Ying-ren, LI An-hong, QIU Wen-ping, TANG Xiao-song. Application of multi-row embedded anti-slide piles to landslide of Wulong county government[J]. , 2009, 30(S1): 160 -164 .
[10] LIU Zhen-ping, HE Huai-jian, ZHU Fa-hua. Study of technology of fast 3D modeling and visualization based on borehole data[J]. , 2009, 30(S1): 260 -266 .