Rock and Soil Mechanics ›› 2024, Vol. 45 ›› Issue (4): 1103-1111.doi: 10.16285/j.rsm.2023.0532

• Fundamental Theory and Experimental Research • Previous Articles     Next Articles

Calculation of site fundamental period in the case of oblique incidence

LIANG Fu-yuan1, 2, XIE Zhi-nan1, 2, LU Jian-qi1, 2, SHAN Zhen-dong1, 2, QI Wen-hao1, 2, ZHANG Xu-bin1, 2, LÜ Guo-jun3   

  1. 1. Key Laboratory of Earthquake Engineering and Engineering Vibration, Institute of Engineering Mechanics, China Earthquake Administration, Harbin, Heilongjiang 150080, China; 2. Key Laboratory of Earthquake Disaster Mitigation, Ministry of Emergency Management, Institute of Engineering Mechanics, China Earthquake Administration, Harbin, Heilongjiang 150080, China; 3. Earthquake Administration of Hebei Province, Shijiazhuang, Hebei 050021, China
  • Received:2023-04-27 Accepted:2023-08-14 Online:2024-04-17 Published:2024-04-17
  • Supported by:
    This work was supported by the National Key R&D Program of China (2022YFC3004303), the National Natural Science Foundation of China (U2039209) and the Key R&D Plan Projects in Hebei Province (22375406D).

Abstract: The site fundamental period is a crucial variable for site effect models and serves as a significant index for seismic site classification. The existing methods for obtaining site fundamental period assume that the angle of incident seismic wave at the site base are vertical. These commonly used methods include simulation and empirical method based on the vertical SH wave propagation in seismic site. The empirical method of layer by layer single degree of freedom method is adopted in the Japanese seismic design code for its simple calculation and the results are equivalent to the simulation method. Nonetheless, the assumption of vertical incidence does not align with the actual incidence angle of ground motion at the site base. This paper addresses this discrepancy by focusing on establishing a method for the calculation of the basic period under obliquely incident seismic wave. First, the 2D SH wave propagation in seismic site under the action of oblique incidence wave is characterized as vertical 1D apparent propagation to establish the SH wave propagation model based on Snell law. Building upon this foundation, a wave propagation simulation model is applied to establish a numerical method and modified layer by layer single degree of freedom method for the calculation of the basic period and then applied to KiK-net stations. The findings indicate that the fundamental period decreases with an increasing incident angle. For the statistical average result of the base incident wave angle at 57°, the average deviation can be 11%. The modified method accurately considers the influence of the seismic wave incident angle, while maintaining calculation simplicity equivalent to the original method. Finally, the paper discusses the influence of selecting the bedrock surface burial depth on the calculated site fundamental period. The results demonstrate a high correlation between the basic period of the site and different depths if the top of the soil layer, with a shear wave velocity larger than 700 m/s, is defined as the bedrock surface.

Key words: site fundamental period, seismic wave incident angle, site classification, site effect model, site bedrock

CLC Number: 

  • TU 451
[1] CHEN Guo-xing, DING Jie-fa, FANG Yi, PENG Yan-ju, LI Xiao-jun, . Investigation of seismic site classification scheme [J]. Rock and Soil Mechanics, 2020, 41(11): 3509-3522.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
[1] LIU Jun-xin,LIU Yu-tian,Hu Qi-jun. Stability of embankment slope subjected to rainfall infiltration considering both runoff-underground seepage and fluid-solid coupling[J]. , 2010, 31(3): 903 -910 .
[2] LI Wei-hua, ZHAO Cheng-gang. Analysis of seismic dynamic response of layered alluvial valleys with soft interlayer[J]. , 2009, 30(1): 45 -51 .
[3] CHEN Juan. Relationship between effective stress intensity index and total stress intensity index[J]. , 2011, 32(2): 471 -473 .
[4] BAI Fu-qing LIU Si-hong YUAN Jiao. Calibration test for total suction wetting curve of filter paper[J]. , 2011, 32(8): 2336 -2340 .
[5] WANG Wei , ZHOU Jie , WANG Shui-lin , LI Xian-fu. Research on three-dimensional modeling of strata block based on radial basis function[J]. , 2012, 33(3): 939 -944 .
[6] LI Chao,YANG Wen-wu,ZHANG Xu,YUNG Siu-hung. Discussion about objectivity of ground response analysis in seismic design[J]. , 2012, 33(11): 3385 -3392 .
[7] ZHANG Run-ming,ZHENG Wen-tang. Analysis and selection of correlational geotechnical parameters[J]. , 2013, 34(7): 1995 -1999 .
[8] QIAN Qi-hu . Definition, mechanism, classification and quantitative forecast model for rockburst and pressure bump[J]. , 2014, 35(1): 1 -6 .
[9] LIU Quan-sheng, LIU Xue-wei. Research on critical problem for fracture network propagation and evolution with multifield coupling of fractured rock mass[J]. , 2014, 299(2): 305 -321 .
[10] LIANG De-ming,LI Chang-dong,YONG Rui,WANG Jiao,HU Bin. Study of stability of soft-hard interbedded slope based on degradation of strength parameters[J]. , 2014, 35(S1): 195 -202 .