岩土力学 ›› 2025, Vol. 46 ›› Issue (S1): 131-140.doi: 10.16285/j.rsm.2024.1454CSTR: 32223.14.j.rsm.2024.1454

• 基础理论与实验研究 • 上一篇    下一篇

基于第二代负泊松比锚杆加固的充填结构面剪切特性研究

黄曼1, 2,宁昊晟1, 2,洪陈杰3,陶志刚3,刘雨星3,张贺1, 2   

  1. 1. 绍兴文理学院 土木工程学院,浙江 绍兴 312000;2. 绍兴文理学院 浙江省岩石力学与地质灾害重点实验室,浙江 绍兴 312000; 3. 中国矿业大学(北京) 力学与土木工程学院,北京 100083
  • 收稿日期:2024-11-22 接受日期:2025-02-06 出版日期:2025-08-08 发布日期:2025-08-26
  • 通讯作者: 洪陈杰,男,1994年生,博士研究生,主要从事岩体结构面力学性质方面的研究工作。E-mail: hongchenjie66@163.com
  • 作者简介:黄曼,男,1983年生,博士,教授,主要从事岩体结构面力学性质等方面的研究工作。E-mail: hmcadx@126.com
  • 基金资助:
    国家自然科学基金(No.42272333,No.42377154)。

Shear behaviors of infilled joints reinforced with second-generation negative Poisson’s ratio bolts

HUANG Man1, 2, NING Hao-sheng1, 2, HONG Chen-jie3, TAO Zhi-gang3, LIU Yu-xing3, ZHANG He1, 2   

  1. 1. School of Civil Engineering, Shaoxing University, Shaoxing, Zhejiang 312000, China; 2. Key Laboratory of Rock Mechanics and Geological Hazards of Zhejiang Province, Shaoxing University, Shaoxing, Zhejiang 312000, China 3. School of Mechanics and Civil Engineering, China University of Mining and Technology (Beijing), Beijing 100083, China
  • Received:2024-11-22 Accepted:2025-02-06 Online:2025-08-08 Published:2025-08-26
  • Supported by:
    This work was supported by the National Natural Science Foundation of China (42272333, 42377154).

摘要: 第二代负泊松比(second-generation negative Poisson’s ratio bolts,2G-NPR)锚杆逐渐应用于裂隙岩体加固,为研究2G-NPR锚杆在充填结构面中的抗剪性能,采用室内直剪试验对比分析了不同充填厚度下2G-NPR锚杆和普通钢筋(Q235)锚杆锚固结构面的剪切力学行为。结果表明,相同充填厚度下,2G-NPR锚杆较Q235锚杆弹性阶段剪切刚度低,峰值抗剪强度高、峰值剪切位移大;随着充填厚度增加,虽然两类锚杆的峰值抗剪强度变化相差不大,但由于2G-NPR锚杆的高吸能、高延展特性,其峰值剪切位移优势明显,使得试样延性得到一定提升。锚杆轴力监测数据表明,2G-NPR锚杆能够有效补偿其与灌浆体解耦造成的轴力突降,且持荷能力更持久;其平均峰值轴力为Q235锚杆的3.17倍,且随着充填厚度增加,峰值轴力持续上升,锚固性能更为稳定。进一步结合声发射监测发现,相同充填厚度下,2G-NPR锚杆的最大累计计数和最大累计能量更低,b值(声发射小事件数与大事件数的比值)下降时间更晚,试样破坏程度更小,揭示2G-NPR锚杆提升试样延性的原因在于其有效吸收了剪切应变能,减缓了裂纹的扩展。研究结果可为2G-NPR锚杆在软硬互层岩体支护工程中的应用提供指导。

关键词: 2G-NPR锚杆, 充填结构面, 抗剪性能, 锚杆轴力, 声发射特征

Abstract: The second-generation negative Poisson’s ratio (2G-NPR) bolts are increasingly being applied in the reinforcement of fractured rock masses. Direct shear tests were conducted to compare and analyze the shear mechanical behaviors of 2G-NPR anchor bolts and conventional steel (Q235) bolts in anchored joints with different filling thicknesses. The results showed that, under the same filling thickness, the 2G-NPR bolts exhibited lower shear stiffness in the elastic stage, higher peak shear strength, and greater peak shear displacement compared to the Q235 bolts. As the filling thickness increased, although the changes in peak shear strength between the two types of anchor bolts were not significantly different, the 2G-NPR bolts displayed a notable advantage in peak shear displacement due to their high energy absorption and high ductility characteristics, resulting in improved specimen ductility. Axial force monitoring data revealed that the 2G-NPR bolts effectively compensated for the sudden axial force drop caused by decoupling with the grout and demonstrated more sustained load-bearing capacity. Their average peak axial force was 3.14 times that of Q235 bolts, and the peak axial force continued to increase with the filling thickness, indicating more stable anchoring performance. Acoustic emission (AE) monitoring further revealed that, under the same filling thickness, the 2G-NPR bolts had lower maximum cumulative counts and maximum cumulative energy, with a later decrease in the b-value (the ratio of small to large AE events), leading to less damage to the specimens. This indicates that the enhanced ductility of the specimens reinforced by 2G-NPR bolts is due to their effective absorption of shear strain energy, which slows the propagation of cracks. These findings provide guidance for the application of 2G-NPR bolts in supporting rock masses with weak interlayers.

Key words: 2G-NPR bolts, infilled joints, shear performance, axial force, acoustic emission characteristics

中图分类号: TU452
[1] 陶志刚, 李梦楠, 于海军, 范方政, 王炯, . 不同锚固孔径下2G-NPR锚杆锚固特性试验研究[J]. 岩土力学, 2025, 46(S1): 67-80.
[2] 宋硕, 任富强, 常来山, . 含预应力锚杆煤岩组合体破坏及声发射特征试验研究[J]. 岩土力学, 2023, 44(S1): 449-460.
[3] 王刚, 宋磊博, 刘夕奇, 包春燕, 吝曼卿, 刘广建, . 非贯通节理花岗岩剪切断裂力学特性及 声发射特征研究[J]. 岩土力学, 2022, 43(6): 1533-1545.
[4] 许江, 雷娇, 刘义鑫, 邬君宇, . 充填物性质影响结构面剪切特性试验研究[J]. 岩土力学, 2019, 40(11): 4129-4137.
[5] 李丽华,肖衡林,唐辉明 ,马 强 ,陈 辉 ,孙 龙 . 轮胎碎片-砂混合土抗剪性能优化试验研究[J]. , 2013, 34(4): 1063-1067.
[6] 于琳琳,徐学燕,邱明国,闫自利,李鹏飞. 冻融作用对饱和粉质黏土抗剪性能的影响[J]. , 2010, 31(8): 2448-2452.
[7] 林传年, 刘泉声, 高 玮, 肖春喜, . 光纤传感技术在锚杆轴力监测中的应用[J]. , 2008, 29(11): 3161-3164.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!