›› 2016, Vol. 37 ›› Issue (7): 2021-2027.doi: 10.16285/j.rsm.2016.07.024

• 岩土工程研究 • 上一篇    下一篇

大松动圈围岩锚网索联合支护参数确定方法探讨

于凤海1，赵同彬1, 2，胡善超1，郭伟耀1   

  1. 1. 山东科技大学 矿山灾害预防控制省部共建国家重点实验室培育基地，山东 青岛 266590； 2. 安徽理工大学 煤矿安全高效开采省部共建教育部重点实验室，安徽 淮南 232001
  • 收稿日期:2015-03-15 出版日期:2016-07-11 发布日期:2018-06-09
  • 作者简介:于凤海，男，1987年生，博士研究生，主要从事矿山岩体力学与巷道支护方面的研究工作
  • 基金资助:

    国家自然科学基金(No. 51274133，No. 51474136，No. 51474137)；山东省泰山学者工程专项经费资助；山东省科技发展计划项目 (No. 2014GSF120002)；煤矿安全高效开采省部共建教育部重点实验室开放基金(No. JYBSYS2014202)。

Discussion on determination method of anchor-net-cable coupling support parameters of surrounding rock in a large broken zone

YU Feng-hai1，ZHAO Tong-bin1, 2，HU Shan-chao1，GUO Wei-yao1   

  1. 1. State Key Laboratory of Mining Disaster Prevention and Control Co-founded by Shandong Province and the Ministry of Science and Technology, Shandong University of Science and Technology, Qingdao, Shandong 266590, China; 2. Key Laboratory of Safe and Effective Coal Mining, Anhui University of Science and Technology, Huainan, Anhui 232001, China
  • Received:2015-03-15 Online:2016-07-11 Published:2018-06-09
  • Supported by:

    This work was supported by the National Natural Science Foundation of China (51274133, 51474136, 51474137), Taishan Scholar Engineering Construction Fund of Shandong Province of China, Shandong Province Science and Technology Development Plan Item(2014GSF120002) and the Open Research Program of Key Laboratory of Safety and High-efficiency Coal Mining, Ministry of Education (JYBSYS2014202).

PDF (Chinese)

931

摘要： 对大松动圈围岩巷道，单一锚杆支护难以实现对整个破裂区围岩的锚固控制，采用锚网索联合支护时，应考虑锚杆支护对联合支护设计的作用。通过分析大松动圈围岩锚杆锚固支护机制，提出量化锚杆支护作用的锚固承载系数，形成锚网索联合支护参数量化计算方法。研究结果表明：锚杆锚固支护后将大松动圈围岩分为浅层锚固区和深层破裂区，浅层锚固区具有一定承载能力，可视作锚索的等效托盘；在锚网索联合支护中，浅层锚固区承载结构稳定的条件是锚固结构承载力大于环向轴力且能够有效控制破裂区围岩；锚固承载系数大小主要取决于浅层锚固区与破裂区和锚杆预紧力与设计锚固力的关系，对于大松动圈围岩其取值范围为0.45～0.75。经现场试验可知，巷道顶底板移近量为273 mm，两帮移近量为393 mm，表面位移曲线趋于平稳，采用该方法得到的锚网索支护参数有效保证了巷道的正常使用。

关键词: 大松动圈, 锚网索联合支护, 浅层锚固区, 锚固承载系数

Abstract: Anchor-net-cable coupling support is widely used in roadways and particularly in large broken zones. Since the anchor is not long enough to support the whole range of surrounding rock in a large broken zone, it should consider the influence of anchor support on the design of a combined supporting when using the anchor-net-cable coupling support. Through systematically analyzing the support mechanism of surrounding rock bolt anchorage in large broken zones, the bolt supporting of anchorage bearing coefficient is proposed. Then, a calculation method to quantitatively determine parameters for anchor-net-cable coupling support is derived. The results show that the strong fractured surrounding rocks are divided into a shallow anchored zone and a deep fracture zone. The former can bear part of the surrounding rock as the cable-pallet, and its stability condition when the bearing capacity is greater than the axial force and the fracture zone is effectively controlled. The bearing coefficient of an anchor is in the range of 0.45-0.75 for the large broken zone, which is depending on the anchorage zone, fracture zone, anchor pre-tightening force and anchoring force. In the field test, the convergences of roof-to-floor and two walls are 273 mm and 393 mm, respectively, and the surface displacement tends to be stable. The proposed method for determination of parameters of anchor-net-cable coupling support effectively ensures its regular applications to the roadways.

Key words: large broken zone, anchor-net-cable coupling support, shallow anchored zone, bearing coefficient of anchor

中图分类号: 

  • TU 353

[1] 华心祝 ，赵少华 ，朱 昊 ，胡华君，. 沿空留巷综合支护技术研究[J]. , 2006, 27(12): 2225-2228.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
版权所有 © 《岩土力学》编辑部
地址：湖北武汉武昌小洪山中国科学院武汉岩土力学研究所(430071)　邮编：200042　电话：027-87198484, 87199252, 87199253, 87198752　E-mail: ytlx@whrsm.ac.cn
本系统由北京玛格泰克科技发展有限公司设计开发