›› 2015, Vol. 36 ›› Issue (S1): 547-552.doi: 10.16285/j.rsm.2015.S1.095

• Geotechnical Engineering • Previous Articles     Next Articles

Jacking force estimation and measured data analysis of 3D curved long distance and large diameter pipe jacking

CHEN Xiao-xiang1, ZHANG Pei-yong1, DING Shi-jun2, TANG Zhi-qiang3   

  1. 1. Fujian Electric Power Survey & Design Institute, Fuzhou, Fujian 350003, China; 2. China Electric Power Research Institute, Beijing 100192, China; 3. State Grid Fujian Electric Power Co., Ltd., Fuzhou, Fujian 350003, China
  • Received:2015-03-10 Online:2015-07-11 Published:2018-06-14

PDF (Chinese)

1283

Abstract: This paper presents the estimation and measured data analysis of the jacking force of a 3D curved pipe with 3.8 meter external diameter and 413 meter long distance. The jacking force consists of the face load and friction resistance; and it is influenced by many factors. The most widely used estimation methods of the jacking force include Chinese cord method; Japanese method and German method; but they all have specific application conditions, which make them have limitations for engineering application; especially when the friction resistance factors are offered by a wide interval. The jacking force are calculated by the above estimation methods in a 3D curved, 413 meter long distance and 3.8 meter external diameter jacking project, 3 intermediate jacking stations are set according to the calculation results. According to the site measuring data during the construction procedure, the composition of the jacking load and its relationship with the jacking distances and the curve radius are analyzed; and the site measured values of frictional coefficient are offer in table. Base on the analysis results, additional frictional coefficient of axis curve pipe jacking is truly exist, and there are deviations between the cord recommended values and the site measured values. but according to this project, the cord recommended values could meet the demands of scheme design in clay or in silt clay. At the end of this paper, suggestions of the jacking force estimation and intermediate jacking station arrangement are proposed, which provide references for similar construction.

Key words: long distance, large diameter, 3D curved pipe jacking, jacking force estimate, site measuring

CLC Number: 

  • TU 443
[1] ZHANG Ding-wen, LIU Zhi-xiang, SHEN Guo-gen, E Jun-yu, . Measurement of earth pressure of shallow buried tunnel with super large diameter and applicability evaluation of calculation method [J]. Rock and Soil Mechanics, 2019, 40(S1): 91-98.
[2] LI Hong-jiang, TONG Li-yuan, LIU Song-yu, BAO Hong-yan, YANG Tao, . Parameter sensitivity of horizontal bearing capacity of large diameter and super-long bored pile [J]. , 2018, 39(5): 1825-1833.
[3] XU Jiang, GONG Wei-ming, ZHANG Qi, DAI Guo-liang, HUO Shao-lei, YANG Chao ，. Numerical simulation and field test study on vertical bearing behavior of large diameter steel of inclined piles [J]. , 2017, 38(8): 2434-2440.
[4] HUANG Xu ，KONG Gang-qiang ，LIU Han-long ，CHARLES W W Ng,. Experimental research on thermomechanical characteristics of PCC energy pile under cyclic temperature field [J]. , 2015, 36(3): 667-673.
[5] LIU Jin-chao , XIONG Gen , ZHU Bin , YING Pan-pan，. Bearing capacity and deflection behaviors of large diameter monopile foundations in sand seabed [J]. , 2015, 36(2): 591-599.
[6] RUI Rui ，YANG Fan ，LIU Peng,. Numerical simulation and assessment of impacts of cofferdam construction on sewage pipe lines [J]. , 2014, 35(1): 273-278.
[7] GAO Meng ，WANG Ying ，GAO Guang-yun ，GU Bao-he ，YANG Cheng-bin . A method for determining tip and side resistances of large diameter pedestal pile [J]. , 2013, 34(3): 797-801.
[8] LI Guang-yao , ZHAO Ke-lie , LU Zu-de . Numerical simulation of size effect on bearing capacity of large diameter rock-socketed piles under different strengths of surrounding rocks [J]. , 2012, 33(S2): 384-388.
[9] FANG Tao , LIU Xin-rong , GENG Da-xin , LUO Zhao , JI Xiao-tuan , ZHENG Ming-xin . Model testing study of vertical bearing behaviors for large diameter pile with variable cross-section (I) [J]. , 2012, 33(10): 2947-2952.
[10] ZHANG Ming-yuan ，LI Sheng-nan ，PENG Wen-tao ，SONG Hua-zhu. Simulation of vertical bearing features for large-diameter and super-long steel pipe pile based on FLAC3D [J]. , 2011, 32(9): 2856-2860.
[11] ZUO Yu-jun，TANG Chun-an，LI Shu-cai ，ZHU Wan-cheng，ZHANG Yi-ping. Numerical analysis of dynamic failure process of inhomogeneous medium based on large diameter SHPB test [J]. , 2011, 32(1): 230-236.
[12] DING Xuan-ming, CHEN Yu-min, KONG Gang-qiang. Frequency domain solution of vertical vibratory response of large diameter pipe pile based on radial invariability assumption [J]. , 2010, 31(S2): 109-114.
[13] DING De-yun, LU Wei-dong, YANG Xiu-ren, LIU Wei-ning, YAN Mei. Study of mechanical performance of metro station constructed by enlarging large diameter shield tunnel [J]. , 2010, 31(S2): 281-287.
[14] DING Wen-qi，YUAN Sen-lin，GAO Xiao-qing，XIE Dong-wu. Research on construction disturbance characteristics caused by super large diameter pipe jacking in electric power tunnel [J]. , 2010, 31(9): 2901-2906.
[15] HUANG Sheng-gen, PENG Cong-wen. Study of deformation characteristics of overlength large diameter piles [J]. , 2009, 30(S2): 308-311.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
[1] CUI Kai, CHEN Wen-wu, ZHANG Jing-ke, HAN Wen-feng, LIANG Shou-yun. Relationships between microstructure parameters and wind erosion rate of multivariate layered soil in slope[J]. , 2009, 30(9): 2741 -2746 .
[2] LI Jia-gui, CHEN Zheng-han, HUANG Xue-feng, LI Jia. In-site test on earth pressure and saturating collapse test for unsaturated loess Q3 on high slope[J]. , 2010, 31(2): 433 -440 .
[3] ZHANG Jian-xin, LIU Shuang-ju, ZHOU Jia-bin. Analysis of influence of foundation pits excavation unloading by top-down method on engineering structures[J]. , 2010, 31(S2): 218 -223 .
[4] BAI Bing, LI Chun-feng. Elastoplastic dynamic responses of close parallel metro tunnels to vibration loading[J]. , 2009, 30(1): 123 -128 .
[5] XUE Yun-liang, LI Shu-lin, LIN Feng, XU Hong-bin. Study of damage constitutive model of SFRC considering effect of damage threshold[J]. , 2009, 30(7): 1987 -1992 .
[6] REN Zhong, Sheng Qian. Study on the disciplinary structure and its evolution of rock mechanics in China[J]. , 2009, 30(S1): 293 -298 .
[7] ZHANG Jun-hui. Analysis of deformation behavior of expressway widening engineering under different foundation treatments[J]. , 2011, 32(4): 1216 -1222 .
[8] WANG Liang-qing, P.H.S.W. Kulatilake, TANG Hui-ming, LIANG Ye , WU Qiong ,. Kinematic analyses of sliding and toppling failure of double free face rock mass slopes[J]. , 2011, 32(S1): 72 -77 .
[9] LI Xu, ZHANG Li-min, AO Guo-dong. Variations of pore structure, void ratio, and water content in soil drying process[J]. , 2011, 32(S1): 100 -105 .
[10] DENG Hua-feng, LI Jian-lin, LIU Jie, ZHU Min, GUO Jing, LU Tao. Research on propagation of compression shear fracture in rocks considering fissure water pressure[J]. , 2011, 32(S1): 297 -0302 .
Copyright © Rock and Soil Mechanics, All Rights Reserved.
Tel: 027-87198484, 87199252, 87199253, 87198752　E-mail: ytlx@whrsm.ac.cn
Powered by Beijing Magtech Co. Ltd