›› 2013, Vol. 34 ›› Issue (S1): 533-539.

• Numerical Analysis • Previous Articles    

Researches on general stability for dump slope based on three-dimensional geologic model

LI Yue1,2,YANG Yong-sheng1,2,MAO Quan-sheng1,2,TANG Kai1   

  1. 1. Institute of Geotechnical Engineering, Sinosteel Maanshan Institute of Mining Research, Maanshan, Anhui 243000, China; 2. State Key Laboratory of Safety and Health for Metal Mine, Sinosteel Maanshan Institute of Mining Research, Maanshan, Anhui 243000,China
  • Received:2013-02-28 Online:2013-08-30 Published:2014-06-09

Abstract: The plane strain analysis method was widely adopted in evaluation of dump slope stability. It is embarrassed that, dumps sometimes destroyed but the safety factor was go over the allowable value. Regardless of those issues had been mentioned frequently, such as mechanical parameters, constitutive model and so on, the spatial clamp effect of convex and divergent effect of concave and slide-body-end effect are also play vital roles in analysis of slope stability. For those reasons, proceed from conditions of plane elevation data, geological section, drilling data and others, Kriging interpolation method, which can obtained a smooth effect of interpolation, was adopted, and then the three-dimensional(3D) geological model of dump was built. Then an interface program, wrote by FISH, was used to import the 3D-model into FLAC3D to discretization and calculation. In this way, the issues mentioned above can be figure out efficiently. Trinity function include 3D geological modeling, model visualization, geotechnical analysis was achieved in a simple and highly efficient way. An example of Jianshan seventh dump of Lanjian Iron Mine, Pangang Group co. Ltd. of China, was concerned by previous mean, 3D stress-strain analysis was carried out, 3D global safety factor was also calculated by 3D strength reduction method. It turned out that the results was accordant to the field investigation and plane strain analysis conclusion. Results calculated by the 3D geological model cannot be affected by dump spatial effect and slide-body-end effect, the general stress-strain pattern, which obtained from the method, can be instructive and meaningful to production management for open-mine dumps.

Key words: waste dump, 3D geological modeling, stability, safety factor, Kriging interpolation, open-mine

CLC Number: 

  • TD 164
[1] ZHU Yan-peng, TAO Jun, YANG Xiao-hui, PENG Jun-guo, WU Qiang, . Design and numerical analyses of high-fill slope strengthened by frame with prestressed anchor-plates [J]. Rock and Soil Mechanics, 2020, 41(2): 612-623.
[2] SU Yong-hua, LI Cheng-cheng. Stability analysis of slope based on Green-Ampt model under heavy rainfall [J]. Rock and Soil Mechanics, 2020, 41(2): 389-398.
[3] LU Hai-feng, MENG Xiang-shuai, YAN Wei, YAO Duo-xi, . Circular sliding solution of mining stability and failure depth of floor layered structure on coal face [J]. Rock and Soil Mechanics, 2020, 41(1): 166-174.
[4] LIU Shun-qing, HUANG Xian-wen, ZHOU Ai-zhao, CAI GUO-jun, JIANG Peng-ming, . A stability analysis method of soil-rock slope based on random block stone model [J]. Rock and Soil Mechanics, 2019, 40(S1): 350-358.
[5] LIU Hong-yan. Influence of macroscopic and mesoscopic flaws on mechanical behavior of rock mass and slope stability [J]. Rock and Soil Mechanics, 2019, 40(S1): 431-439.
[6] NIE Xiu-peng, PANG Huan-ping, SUN Zhi-bin, XIE Song-mei, HOU Chao-qun. Upper bound analysis of seismic stability of 3D reinforced slopes [J]. Rock and Soil Mechanics, 2019, 40(9): 3483-3492.
[7] ZHU Cai-hui, CUI Chen, LAN Kai-jiang, DONG Yong-qiang. The effects of the degradation of brick-clay structure and demolition of embedded buildings on the stability of Yulin City Wall [J]. Rock and Soil Mechanics, 2019, 40(8): 3153-3166.
[8] CHEN Chong, WANG Wei, LÜ Hua-yong, . Stability analysis of slope reinforced with composite anti-slide pile model [J]. Rock and Soil Mechanics, 2019, 40(8): 3207-3217.
[9] CHEN Jian-gong, LI Hui, HE Zi-yong, . Homogeneous soil slope stability analysis based on variational method [J]. Rock and Soil Mechanics, 2019, 40(8): 2931-2937.
[10] ZHANG Hai-na, CHEN Cong-xin, ZHENG Yun, SUN Chao-yi, ZHANG Ya-peng, LIU Xiu-min, . Analysis of flexural toppling failure of rock slopes subjected to the load applied on the top [J]. Rock and Soil Mechanics, 2019, 40(8): 2938-2946.
[11] JIANG Ze-feng, ZHANG Ge, ZHU Da-yong, WANG Jun, . Critical sliding field method for slope under anchorage force and its application [J]. Rock and Soil Mechanics, 2019, 40(7): 2799-2806.
[12] WANG Hong-lei, SUN Zhi-zhong, LIU Yong-zhi, WU Gui-long, . The monitoring analysis of the thermal-mechanical response on embankment with thawed interlayer along Qinghai-Tibet Railway [J]. Rock and Soil Mechanics, 2019, 40(7): 2815-2824.
[13] HAN Tong-chun, LIN Bo-wen, HE Lu, SU Yu-qin, . Three-dimensional slope modelling method and its stability based on coupled GIS and numerical simulation software [J]. Rock and Soil Mechanics, 2019, 40(7): 2855-2865.
[14] CHEN Zheng, HE Ping, YAN Du-min, GAO Hong-jie, NIE Ao-xiang, . Upper-bound limit analysis of tunnel face stability under advanced support [J]. Rock and Soil Mechanics, 2019, 40(6): 2154-2162.
[15] WU Guan-ye, ZHENG Hui-feng, XU Jian-rong. Model test study of stability and failure mechanism of three-dimensional complicated block system slope with deeply reinforcement [J]. Rock and Soil Mechanics, 2019, 40(6): 2369-2378.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
[1] ZHOU Huo-yao,SHI Jian-yong. Test research on soil compacting effect of full scale jacked-in pile in saturated soft clay[J]. , 2009, 30(11): 3291 -3296 .
[2] MA Shao-kun,HUANG Mao-song,HU Ping,QIN Hui-lai. Application of modified logarithmic model for suction strength to bearing capacity of subsoil[J]. , 2010, 31(6): 1853 -1857 .
[3] DONG Yun ,HE Wei-zhong, SUN Wei. Analysis of stability & deformation and destruction mode of road embankment built aside dam[J]. , 2010, 31(8): 2471 -2478 .
[4] YE Bin, YE Guan-lin , NAGAYA Junichi. Dynamic numerical simulation of a new quay wall structure with geosynthetics[J]. , 2010, 31(S2): 442 -446 .
[5] GAO Yan-bin, CUI Yu-jun. Use of microclimate energy analysis method in geotechnical problem analysis[J]. , 2009, 30(2): 433 -439 .
[6] SHI Chong, XU Wei-ya, ZHOU Jia-wen, ZHANG Jin-long. Transmission model of joint interface and its performance of vibration isolation[J]. , 2009, 30(3): 729 -734 .
[7] PANG Da-peng, CHEN Jian-ping, WANG Dan-wei. Application of fractal description of rock mass joint and cracks network to advanced geological forecast of tunnels[J]. , 2009, 30(5): 1415 -1420 .
[8] YANG Rong-wei, CHENG Xiao-hui. Direct shear experiments of photoelastic granular materials[J]. , 2009, 30(S1): 103 -109 .
[9] SUN Bo,ZHOU Zhong-hua,ZHANG Hu-yuan,ZHANG Yong-xia,ZHENG Long. Characteristics and prediction model of surface temperature for rammed earthen architecture ruins[J]. , 2011, 32(3): 867 -871 .
[10] LIN Ping , YE Guan-lin , CHEN Nan , WANG Jian-hua , HASHIMOTO Tadashi. In-situ monitoring method for frozen soil pressure during cross passage construction by freezing method[J]. , 2011, 32(8): 2555 -2560 .