Rock and Soil Mechanics ›› 2020, Vol. 41 ›› Issue (S1): 63-73.doi: 10.16285/j.rsm.2019.1234

• Fundamental Theroy and Experimental Research • Previous Articles     Next Articles

Mohr’s circle analysis and numerical simulation of stress state of pillar under combined compression-shear loading

LUO Bin-yu1, 2, YE Yi-cheng1, 2, 3, HU Nan-yan1, 2, 3, LI Peng-cheng1, 3, CHEN Chang-zhao1, 3   

  1. 1. College of Resources and Environmental Engineering, Wuhan University of Science and Technology, Wuhan, Hubei 430081, China; 2. Industrial Safety Engineering Technology Research Center of Hubei Province, Wuhan, Hubei 430081, China; 3. Hubei Key Laboratory for Efficient Utilization and Agglomeration of Met Allergic Mineral Resource, Wuhan University of Science and Technology, Wuhan, Hubei 430081, China
  • Received:2019-07-14 Revised:2019-10-09 Online:2020-06-19 Published:2020-06-04
  • Supported by:
    This work was supported by the National Natural Science Foundation of China (51574183).

PDF (Chinese)

72

Abstract: The stress state analysis of the pillar in inclined bedded ore-body mining is a key issue to ensure the safe mining. Based on the theory of rock mechanics, a mechanical model of inclined pillars under compression and shear loads is established, and the generalized Mohr circle equations describing the stress state of the pillars under compression-shear loading is derived. The position and radius of the generalized Mohr’s circle center are affected by the dip of the ore body and the loading on pillar, which reveal three types of stress evolution paths of the inclined pillar. These three stress paths are found to satisfy the line, circle and plane equation, respectively. Moreover, three types of control modes on the stress path evolution are presented. Based on the Mohr strength theory, the influences of stress path on pillar stability under three main control modes are analyzed. The inclined pillar is more easily unstable than vertical pillar and details are explained in this paper. Finally, the stress state of pillar obtained by numerical simulation is consistent with that of the general Mohr’s method, demonstrating that the failure mode of pillar is asymmetric hourglass shape. The results provide a new idea for the stability analysis of inclined pillars.

Key words: combined compression-shear loading, inclined pillar, stress state, general Mohr’s circle

CLC Number: 

  • TD31
[1] XU Ri-qing, JIANG Jia-qi, FENG Su-yang, JU Lu-ying, . A rotational plastic potential model and non-associated plastic flow rule [J]. Rock and Soil Mechanics, 2020, 41(5): 1474-1482.
[2] ZHU Jun-gao, JIANG Ming-jie, LU Yang-yang, JI En-yue, LUO Xue-hao, . Experimental study on influence of stress state on at-rest earth pressure coefficient for coarse grained soil [J]. Rock and Soil Mechanics, 2019, 40(3): 827-833.
[3] CHEN Si-li, LI Yan-yu, ZHOU Hui, HU Da-wei. Three-parameter twin ?2 strength criterion based on ultimate stress ratio and its application [J]. , 2018, 39(6): 1948-1954.
[4] TONG Xing, LI Yu-chao, KE Han, WEN Yi-duo, PAN Qian, . Field test on the stress state and consolidation behavior of soil-bentonite cutoff walls [J]. , 2018, 39(6): 2131-2138.
[5] JIANG Jing-shan, CHENG Zhan-lin, ZUO Yong-zhen, DING Hong-shun,. Experimental investigation on strength characteristic of coarse-grained materials in three-dimensional stress state [J]. , 2018, 39(10): 3581-3588.
[6] LIU Jing-shuo, CAO Ping, FAN Jin-xing, ZHANG Chun-yang, WANG Wen-ping, LIU Bin，. A study on rock breaking characteristics and efficiency with TBM cutters in a biaxial state [J]. , 2017, 38(6): 1541-1549.
[7] KONG Zhi-peng, SUN Hai-xia, CHEN Si-li. A nonlinear tri-parameter strength criterion for rock materials and its application [J]. , 2017, 38(12): 3524-3531.
[8] LI Shun-qun, XIA Jin-hong, WANG Xing-xing,. Principle and its application of a three-dimensional earth pressure cell [J]. , 2016, 37(S2): 337-342.
[9] CHU Ya, LIU Song-yu, CAI Guo-jun, . Research and development of calibration chamber model test with in-situ injection device [J]. , 2015, 36(S1): 452-458.
[10] ZHANG Tong-wei，XU Hai-bo，DENG Yong-feng. A study of the correlation between the damage variable and disturbance degree of structural soft clay [J]. , 2015, 36(4): 958-964.
[11] ZHOU Xiao-long ，MA Kang ，QIAN Ming ，LIU De-wen ，ZHAO Qi，. Calculation of passive earth pressures on retaining wall considering soil arching effects of backfill clayey soil [J]. , 2014, 35(S1): 245-250.
[12] HUANG Bin ，CHEN Zhan-lin ，XU Han,. Expansion model of expansive soil and its application to slope engineering [J]. , 2014, 35(12): 3550-3555.
[13] ZHANG Chong-yuan ，WU Man-lu ，LIAO Chun-ting . In-situ stress measurement and study of stress state characteristics of Jinchuan No.3 mine [J]. , 2013, 34(11): 3254-3260.
[14] LI Jie , WANG Ming-yang , FAN Peng-xian , SHI Cun-cheng . Study of loading-unloading states and energy distribution relationship for rock mass [J]. , 2012, 33(S2): 125-132.
[15] LUO Yu-long, WU Qiang, ZHAN Mei-li, SHENG Jin-chang. Study of critical piping hydraulic gradient of suspended cut-off wall and sand gravel foundation under different stress states [J]. , 2012, 33(S1): 73-78.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
Copyright © Rock and Soil Mechanics, All Rights Reserved.
Tel: 027-87198484, 87199252, 87199253, 87198752　E-mail: ytlx@whrsm.ac.cn
Powered by Beijing Magtech Co. Ltd