基于3D-FSM的预紧力端锚数值模拟及其多核并行化研究

doi:10.16285/j.rsm.2016.03.033

›› 2016, Vol. 37 ›› Issue (3): 875-882.doi: 10.16285/j.rsm.2016.03.033

基于3D-FSM的预紧力端锚数值模拟及其多核并行化研究

王翀^{1, 2}，刘承论²

1. 山东科技大学网络与信息中心，山东青岛 266590；2. 山东科技大学矿业与安全工程学院，山东青岛 266590

收稿日期:2015-07-21 出版日期:2016-03-11 发布日期:2018-06-09
作者简介:王翀，男，1980年生，博士研究生，工程师，主要从事岩石力学数值模拟方面的研究。
基金资助:
国家自然科学基金资助项目（No.51479108）

Numerical simulation of pre-tightening force grouted anchor coupled with 3D-FSM and its multi-core parallel computing

WANG Chong^{1, 2}, LIU Cheng-lun²

1. Network and Information Center, Shandong University of Science and Technology, Qingdao, Shandong 266590, China; 2. College of Mining and Safety Engineering, Shandong University of Science and Technology, Qingdao, Shandong 266590, China

Received:2015-07-21 Online:2016-03-11 Published:2018-06-09
Supported by:
This work was supported by the National Natural Science Foundation of China (51479108).

摘要/Abstract

摘要： 在对传统锚杆荷载传递机制分析的基础上，提出了一种考虑托板、锚杆与岩体相互作用的数值模拟方法：通过Kelvin基本解计算出锚杆集中力对围岩的影响，同时就锚杆自由段与相应岩体两端点的位移差相等建立位移方程，结合先前开发的3D-FSM数值模拟系统中的表面受力平衡方程进行联立求解，利用所得结果可以计算域内任意点的应力及位移变化，形成完整的预紧力端锚边界元数值模拟系统。通过与Flac3D系统模拟对比，验证了该系统的可靠性。为提高运算效率，对该系统进行基于OpenMP的多核并行化改进，给出了改进的基本思路和加速比对比图。由于边界元本身具有建模简单、计算区域大、计算精度高等优点，因此，这种模拟方法有很大的应用价值。

关键词: 虚拟应力法, 锚杆支护, Kelvin基本解, 预紧力, OpenMP

Abstract: A new numerical approach is proposed to simulate bolt supporting by considering interactions among anchor plate, anchor arm and rock based on the analysis of traditional load transfer mechanism of the bolt. The effects of concentrated stress from one bolt on the surrounding rock are investigated by employing analytical integral of Kelvin’s solutions. The displacements equations of the anchor free section and the relative section of drilling holes are established according to the same displacements of them along the axis of anchor arm. Coupled with the previous 3D fictitious stress method (FSM) system, a new boundary element simulation system is formed completely on the partially grouted bolt supporting by considering anchor plate, which can be applied to calculate the stress and displacement of an arbitrary point in the rock after bolting. The reliability of the system has been verified by a comparison of numerical results obtained by a commercial software Flac3D. Meanwhile, a multi-core parallel improvement in terms of OpenMP is conducted to improve the operation efficiency. The principal ideas and the comparison chart of speedups are presented in detail. The system has great application value in the course of advantages of boundary element such as simple modelling, large computable domain and high accuracy.

Key words: fictitious stress method (FSM), bolt supporting, kelvin’s solutions, pre-tightening force, OpenMP

中图分类号:

O 242

王翀，刘承论，. 基于3D-FSM的预紧力端锚数值模拟及其多核并行化研究[J]. , 2016, 37(3): 875-882.

WANG Chong , LIU Cheng-lun，. Numerical simulation of pre-tightening force grouted anchor coupled with 3D-FSM and its multi-core parallel computing[J]. , 2016, 37(3): 875-882.

参考文献

相关文章 14

[1]	胡帅伟, 陈士海, . 爆破振动下围岩支护锚杆动力响应解析解[J]. 岩土力学, 2019, 40(1): 281-287.
[2]	韩昌瑞，白世伟，王玉朋，张东焕，. 层状岩体深埋长隧道锚杆支护优化设计[J]. , 2016, 37(S1): 409-414.
[3]	孟强，赵洪波，茹忠亮. 锚杆支护圆形隧洞的等效强度参数及可靠性分析[J]. , 2014, 35(S1): 437-442.
[4]	付晓东，盛谦，张勇慧. 基于OpenMP的非连续变形分析并行计算方法[J]. , 2014, 35(8): 2401-2407.
[5]	言志信，张刘平，江平，段建，任志华 , . 锚固上覆红黏土岩体边坡的地震动力响应[J]. , 2014, 35(3): 753-758.
[6]	周勇，朱彦鹏. 预应力锚杆柔性支护体系的锚杆抗拔力研究[J]. , 2012, 33(2): 415-421.
[7]	张农，李桂臣，阚甲广. 煤巷顶板软弱夹层层位对锚杆支护结构稳定性影响[J]. , 2011, 32(9): 2753-2758.
[8]	钟小春，张金荣，秦建设，朱伟. 盾构隧道纵向等效弯曲刚度的简化计算模型及影响因素分析[J]. , 2011, 32(1): 132-136.
[9]	戴俊，郭相参. 煤矿巷道锚杆支护的参数优化[J]. , 2009, 30(S1): 140-143.
[10]	肖明，叶超，傅志浩. 地下隧洞开挖和支护的三维数值分析计算[J]. , 2007, 28(12): 2501-2505.
[11]	张玉军. 非饱和地质体中水-应力耦合二维有限元方法及对锚杆支护的分析[J]. , 2006, 27(2): 233-237.
[12]	李新平，宋桂红 ,刘巍，彭元平，. 岩体隧道锚固作用分析[J]. , 2005, 26(S2): 131-135.
[13]	龚文惠, 刘涛, 黄燕宏. 顺层路堑边坡锚杆支护稳定性的有限元模拟分析[J]. , 2005, 26(S2): 136-140.
[14]	范秋雁，陈波，沈冰,. 考虑施工过程的基坑锚杆支护模型试验研究[J]. , 2005, 26(12): 1874-1878.

Metrics

Viewed

Full text

Abstract

Cited

Shared

Discussed

基于3D-FSM的预紧力端锚数值模拟及其多核并行化研究

Numerical simulation of pre-tightening force grouted anchor coupled with 3D-FSM and its multi-core parallel computing

PDF (Chinese)

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 14

Metrics

本文评价

推荐阅读 0