›› 2005, Vol. 26 ›› Issue (S2): 119-122.

• 基础理论与实验研究 • 上一篇    下一篇

巴东县杨家坪煤炭采空区岩体力学性质试验研究

张必勇,徐 俊   

  1. 中国地质大学 研究生院,武汉 430074
  • 收稿日期:2005-05-04 发布日期:2005-12-16
  • 作者简介:张必勇,男,硕士研究生,主要研究滑坡的防治技术和岩土工程地基处理技术

The test research for mechanical characteristics of rock masses in Yangjiaping coal mining worked out area in Badong county

ZHANG Bi-yong, XU Jun   

  1. Graduate School, China University of Geosciences, Wuhan 430074, China
  • Received:2005-05-04 Published:2005-12-16

摘要: 对杨家坪煤炭采空区主要岩层进行了较系统的试验研究,包括岩体结构的野外调查、岩块与结构面室内试验及岩体力学参数经验估算,岩体结构面网络模拟等。对各种试验数据进行了分析整理,得到了岩块、结构面的物理力学性质参数。并用岩体工程分类及Hoek-Brown经验方法对各类岩体的力学参数进行了估算。在分析对比基础上,考虑了岩体所处地质条件,给出了各种岩体的计算参数建议值。有限元计算结果表明,建议参数值能较好地反映采空区岩体的力学性质。

关键词: 煤炭采空区, 岩体结构面, 网络模拟, 岩体工程分类, 参数估算

Abstract: The comprehensive test research including the field investigation of the rock masses structure and the laboratory testing of the rock and the discontinuity, the mechanical parameter estimation of the rock masses, and the network simulation of the discontinuity, for the rock formation in Yangjiaping coal mining worked out area has been carried out. The mechanical parameters of rock and discontinuity can be got base on the analysis of the test result. Then the mechanical parameters of rock masses can be estimated by Hoek-Brown method. The mechanical parameters of all the rock masses which involved in finite element calculation have been put forward associating with the geological condition. The FEM result proves that the mechanical parameters of rock masses is reasonable.

Key words: coal mining worked out area, discontinuity, network simulation, engineering classification of rock masses, parameter estimation

中图分类号: 

  • TU 452
[1] 陈 磊, 赵学胜, 汤益先, 张 红, . 结合InSAR的幂指数Knothe模型参数拟合与评估[J]. 岩土力学, 2018, 39(S2): 423-431.
[2] 倪卫达,单治钢,刘 晓,. 基于三维节理网络模拟的坝基岩体结构分类研究[J]. , 2018, 39(1): 287-296.
[3] 葛云峰,陈 勇,王亮清,霍少磊,王昌硕,夏 丁,钟 鹏,. 基于点云数据对齐技术的岩体结构面三维吻合度求取[J]. , 2017, 38(11): 3385-3393.
[4] 韩增强 ,王川婴 ,施华堂 ,丁 刚 ,胡 胜 ,王益腾,. 空间坐标系下地下岩体结构面数学描述方法初探[J]. , 2016, 37(S2): 410-414.
[5] 郭 亮,李晓昭,周扬一,李 煜,纪成亮,. 随机与确定耦合的裂隙岩体结构面三维网络模拟[J]. , 2016, 37(9): 2636-2644.
[6] 王智德 ,夏元友 ,夏国邦 ,李敬东 ,陈 东,. 顺层岩质边坡结构面抗剪强度特性试验研究[J]. , 2015, 36(S2): 193-200.
[7] 宋腾蛟,陈剑平,张 文,项良俊,杨俊辉. 基于人工蜂群算法的岩体结构面多参数优势分组研究[J]. , 2015, 36(3): 861-868.
[8] 雍 睿,唐辉明,胡新丽,李长冬,黄 磊. 结构面抗剪强度参数线性拟合方法适用性研究[J]. , 2012, 33(S2): 118-124.
[9] 徐 磊,任青文. 岩体结构面新型本构模型研究[J]. , 2011, 32(S1): 217-224.
[10] 贾 超,王志鹏,朱维申. 节理网络模拟的程序实现及其在地下洞室中的动态响应分析[J]. , 2011, 32(9): 2867-2872.
[11] 文志杰,石永奎,崔增娣,王荣超. 全长黏结型预应力锚杆受力特性研究[J]. , 2010, 31(S1): 177-181.
[12] 张宜虎,周火明,邬爱清. 结构面网络模拟结果后处理研究[J]. , 2009, 30(9): 2855-2861.
[13] 刘艳章 ,盛建龙 ,葛修润 ,王水林 . 基于岩体结构面分布分形维的岩体质量评价[J]. , 2007, 28(5): 971-975.
[14] 吴继敏,孙少锐,魏继红. 应用力学机理的网络模拟预测隧洞超挖问题[J]. , 2004, 25(8): 1220-1224.
[15] 王靖涛;. 模糊集合论在岩体的综合评价和工程分类上的应用[J]. , 1980, 2(2): 33-46.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
[1] 米海珍,高 春. 生石灰膨胀特性的试验研究[J]. , 2010, 31(4): 1253 -1256 .
[2] 何先龙,赵立珍. 基于多重互相关函数分析剪切波速[J]. , 2010, 31(8): 2541 -2545 .
[3] 孙熙平,张宝华,张 强,王笑难. 重力式码头基床遭水流冲刷后的稳定性分析[J]. , 2010, 31(10): 3184 -3190 .
[4] 潘 岳,张 勇,王志强. 煤与瓦斯突出中单个煤壳解体突出的突变理论分析[J]. , 2009, 30(3): 595 -602 .
[5] 付成华,周洪波,陈胜宏. 混凝土喷层支护节理岩体等效力学模型及其应用[J]. , 2009, 30(7): 1967 -1973 .
[6] 樊秀峰,吴振祥,简文彬. 循环荷载下砂岩疲劳损伤过程的声学特性分析[J]. , 2009, 30(S1): 58 -62 .
[7] 詹传妮,王 琛,何昌荣. 不排水条件下砾石土的应变率效应[J]. , 2011, 32(S1): 428 -0432 .
[8] 孟凡兵 ,林从谋 ,蔡丽光 ,李 博. 小净距隧道爆破开挖中夹岩累积损伤计算方法及其应用[J]. , 2011, 32(5): 1491 -1494 .
[9] 杨永香 ,周 健 ,贾敏才 ,胡金虎. 饱和砂土液化特性的可视化试验研究[J]. , 2011, 32(6): 1643 -1648 .
[10] 胡 伟 ,尹振宇 ,DANO Christophe ,HICHER Pierre-yves. 易破碎粒状材料本构研究[J]. , 2011, 32(S2): 159 -165 .