›› 2006, Vol. 27 ›› Issue (1): 127-131.

• Fundamental Theroy and Experimental Research • Previous Articles     Next Articles

Combination of 3-yield surface model with SMP criterion

SHI Zi-gang, LUO Ting   

  1. Department of Civil Engineering, Beihang University, Beijing 100083, China
  • Received:2004-06-25 Online:2006-01-10 Published:2013-10-31

PDF (PC)

1023

Abstract: The 3-yield surface model developed by Shen (1984), is one of the most widely used model in civil engineering in China, which has three surfaces, compression yield surface, shear yield surface and dilatancy yield surface. The SMP criterion (Matsuoka and Nakai, 1974；Matsuoka, 1976) is one of the best criterions for the soil in the world. By using the transformed stresses, the 3-yield surface model is combined with the SMP criterion. The revised 3-yield surface model is the same as the original model in form. Comparisons with the experimental data show that not only it can well describe the stress-strain behaviors of the soil, but also can well describe the bifurcate behavior between the strains and stress. The transformed stress method is simple and effective.

Key words: yield surface, SMP criterion, three-dimensional stresses, transformed stress

CLC Number: 

  • TU 43
  • Please send e-mail to pingzhou3@126.com if you would like to read full paper in English for free. Parts of our published papers have English translations.
[1] TIAN Yu, YAO Yang-ping, LUO Ting. Explanation and modeling of non-coaxiality of soils from anisotropy [J]. , 2018, 39(6): 2035-2042.
[2] LI Lin, LI Jing-pei, YUE Zhu-wen, TANG Jian-hua, . Mechanical mechanism of hole-wall stability of bored pile in saturated clay [J]. , 2016, 37(9): 2496-2504.
[3] Lü Cai-zhong，SUN Ya-li. A generalized SMP criterion for the optimal support of soft rock tunnel and its comparative analysis [J]. , 2016, 37(7): 1956-1962.
[4] SUN Xiang , GUO Xiao-xia , SHAO Long-tan , . A return-mapping algorithm and implementation of thermodynamics-based critical state model [J]. , 2015, 36(S1): 85-93.
[5] ZHONG Zu-liang , WANG Sui , LIU Xin-rong , . Yield criterion of intact structural loess based on integrated structural potential concept [J]. , 2015, 36(11): 3041-3046.
[6] HU Cun ，LIU Hai-xiao,. A cyclic bounding surface plasticity model for saturated clay with initial anisotropy [J]. , 2014, 35(10): 2807-2814.
[7] SHI Jiang-wei，ZHU Jun-gao，ZHANG Dan，ZHOU Xi-wu. Analysis of parameter sensitivity of ellipse-parabola double yield surface model [J]. , 2011, 32(1): 70-76.
[8] DENG An, XIAO Yang. Research on generalized Poisson’s ratio based on elliptic-parabolic yield surfaces model [J]. , 2010, 31(5): 1445-1451.
[9] PAN Xiao-ming, KONG Juan, YANG Zhao, LIU Cheng. Secondary development and application of unified elastoplastic constitutive model to ABAQUS [J]. , 2010, 31(4): 1092-1098.
[10] CHEN Ming-xiang, WANG Bi-fei. Constitutive equations based on internal variable and tensor function representation theorem [J]. , 2010, 31(2): 397-402.
[11] LU De-chun，DU Xiu-li，YAO Yang-ping，GONG Qiu-ming. Linear transformed stress space and its application [J]. , 2010, 31(1): 271-276.
[12] LIU Xin-rong, ZHONG Zu-liang, ZHANG Yong-xing, WANG Ji-ming. Elastoplastic modeling of unsaturated intact Q2 loess with plastic work as hardening parameter [J]. , 2009, 30(5): 1215-1220.
[13] GAO Guang-yun , SHI Gang , GU Zhong-hua , FENG Shi-jin . A simplified elastoplastic constitutive model under undrained cyclic loading [J]. , 2008, 29(5): 1195-1199.
[14] ZHANG Chuan-qing, ZHOU Hui, FENG Xia-ting. Numerical format of elastoplastic constitutive model based on the unified strength theory in FLAC3D [J]. , 2008, 29(3): 596-602.
[15] DENG Chu-jian, ZHENG Ying-ren, ZHU Jian-kai. Formula of intermediate principal stress at failure for Mohr-Coulomb material in plane strain state [J]. , 2008, 29(2): 310-314.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
[1] WU Chang-yu, ZHANG Wei, LI Si-shen, ZHU Guo-sheng. Research on mechanical clogging mechanism of releaf well and its control method[J]. , 2009, 30(10): 3181 -3187 .
[2] HE Fa-guo, CHEN Wen-wu, HAN Wen-feng, ZHANG Jing-ke. Correlation of microstructure indices and performance of sand solidified with polymer material SH[J]. , 2009, 30(12): 3803 -3807 .
[3] LEI Yong-sheng. Research on protective measures of City Wall and Bell Tower due to underneath crossing Xi’an Metro Line No.2[J]. , 2010, 31(1): 223 -228 .
[4] SHANG Shou-ping, SUI Xiao-xi, ZHOU Zhi-jin, LIU Fang-cheng, XIONG Wei. Study of dynamic shear modulus of granulated rubber-sand mixture[J]. , 2010, 31(2): 377 -381 .
[5] XIAO Zhong, WANG Yuan-zhan, JI Chun-ning, HUANG Tai-kun, SHAN Xu. Stability analysis of large cylindrical structure for strengthening soft foundation under wave load[J]. , 2010, 31(8): 2648 -2654 .
[6] CHAI Bo, YIN Kun-long, CHEN Li-xia, LI Yuan-yao. Analysis of slope deformation under control of rock mass structure[J]. , 2009, 30(2): 521 -525 .
[7] ZHAO Hong-bo, RU Zhong-liang, ZHANG Shi-ke. Application of support vector machine to reliability analysis of underground engineering[J]. , 2009, 30(2): 526 -530 .
[8] XU Yang, GAO Qian, LI Xin, LI Jun-hua, JIA Yun-xi. In-situ experimental study of permeability of rock and soil aggregates[J]. , 2009, 30(3): 855 -858 .
[9] SU Guo-shao, ZHANG Ke-shi, Lü Hai-bo. A cooperative optimization method based on particle swarm optimization and Gaussian process for displacement back analysis[J]. , 2011, 32(2): 510 -515 .
[10] DENG Hua-feng，ZHANG Guo-dong，WANG Le-hua，DENG Cheng-jin，GUO Jing，LU Tao. Monitoring and analysis of blasting vibration in diversion tunnel excavation[J]. , 2011, 32(3): 855 -860 .
Copyright © Rock and Soil Mechanics, All Rights Reserved.
Tel: 027-87198484, 87199252, 87199253, 87198752　E-mail: ytlx@whrsm.ac.cn
Powered by Beijing Magtech Co. Ltd