›› 2015, Vol. 36 ›› Issue (6): 1676-1682.doi: 10.16285/j.rsm.2015.06.020

• 基础理论与实验研究 • 上一篇    下一篇

含瓦斯煤相似材料研制及其突出试验应用

王汉鹏1,张庆贺1,袁 亮1,2,薛俊华2,李清川1,周 伟2,李建明1,张 冰1   

  1. 1. 山东大学 岩土与结构工程研究中心,山东 济南 250061;2. 淮南矿业集团 深部煤炭开采与环境保护国家重点实验室,安徽 淮南 232001
  • 收稿日期:2014-09-23 出版日期:2015-06-11 发布日期:2018-06-14
  • 通讯作者: 张庆贺,男,1988年生,博士研究生,主要从事煤与瓦斯突出机制和岩土工程模型试验方面的研究工作。E-mail: zhangqhsdu@163.com E-mail:pcwli@163.com
  • 作者简介:王汉鹏,男,1978年生,博士,副教授,主要从事岩土工程物理模拟和深部岩体力学稳定性分析与控制方法方面的研究工作。
  • 基金资助:

    国家重大仪器设备专项(No.51427804);山东大学自主创新基金(No.2012TS062)

Development of a similar material for methane-bearing coal and its application to outburst experiment

WANG Han-peng1,ZHANG Qing-he1,YUAN Liang1, 2,XUE Jun-hua2,LI Qing-chuan1, ZHOU Wei2,LI Jian-ming1,ZHANG Bing1   

  1. 1. Research Centre of Geotechnical and Structural Engineering, Shandong University, Jinan, Shandong 250061, China; 2. State Key Laboratory of Deep Coal Mining and Environmental Protection, Huainan Mining Group Corporation, Huainan, Anhui 232001, China
  • Received:2014-09-23 Online:2015-06-11 Published:2018-06-14

摘要: 采用相似物理模拟试验研究煤与瓦斯突出机制和规律是目前有效的方法,含瓦斯煤体相似材料是突出定量模拟的关键因素。研制出一种新型的含瓦斯煤体相似材料,该相似材料以一定粒径分布的煤粉为骨料,以腐植酸钠水溶液为胶结剂,混合压制成型后干燥。大量正交配比试验表明:在成型压力15 MPa下,相似材料的重度、孔隙率趋于稳定并与原煤十分接近;相似材料抗压强度高,可调范围达0.5~2.8 MPa,与胶结剂浓度近似呈线性正比关系;吸附解吸试验表明,相似材料的吸附性良好,其与原煤的吸附等温线一致;并且具有材料价格低廉、无毒副作用、配比简单、性能稳定和各物理力学参数调节方便等特点,可用来模拟不同强度原煤。采用相似材料制作的型煤开展了煤与瓦斯突出试验,成功模拟了煤与瓦斯突出现象和过程,证明该相似材料能很好地模拟具有吸附解吸特性的含瓦斯煤体。

关键词: 煤与瓦斯突出, 含瓦斯煤, 相似材料, 试验研制, 突出

Abstract: An effective approach to studying the mechanism and development of coal outburst is to conduct the outburst model tests using similar materials. A new similar material for the methane-bearing coal is developed. After mixing a pulverized with a specified particle size distribution as aggregate and a humid acid sodium aqueous solution as a cementing agent, the similar materials is made by sequentially shaping and drying the mixture. A number of orthogonal-ratio tests show that the similar material is quite similar to the raw coal with regard to bulk density and porosity under a 15 MPa forming pressure; and the material has a high compressive strength ranging from 0.5-2.8 MPa, which varies almost linearly with cementing agent concentration. Adsorption and desorption tests show that the similar material perform very well in regard to adsorption, and its adsorption isotherm agrees with that of the raw coal. The developed similar material possesses such advantages as cost-effectiveness, non-toxicity, easy manufacture, stable performance and flexible functions, and can be used to simulate the behaviors of the raw coal with different strengths, Model tests of methane outburst are carried out using the made similar material, and the phenomenon and processes of methane outburst are successfully revealed; it is shown that the similar material can simulate adsorptive and desorptive behaviors of methane-bearing coals.

Key words: coal and methane outburst, methane-bearing coal, similar material, test development, outburst

中图分类号: 

  • TD844
[1] 许江, 邬君宇, 刘义鑫, 雷娇, . 不同充填度下岩体剪切−渗流耦合试验研究[J]. 岩土力学, 2019, 40(9): 3416-3424.
[2] 储昭飞, 刘保国, 任大瑞, 宋宇, 马强, . 软岩流变相似材料的研制及物理模型试验应用[J]. 岩土力学, 2019, 40(6): 2172-2182.
[3] 袁 亮, 刘业娇, 田志超, 唐春安, 薛俊华, 段昌瑞, 张 寒, . 地面垂直钻孔预抽特厚煤层瓦斯数值试验与应用[J]. 岩土力学, 2019, 40(1): 370-378.
[4] 肖晓春, 丁 鑫, 潘一山, 吕祥锋, 吴 迪, 王 磊, 樊玉峰, . 含瓦斯煤岩真三轴多参量试验系统研制及应用[J]. 岩土力学, 2018, 39(S2): 451-462.
[5] 姚爱军,张剑涛,郭海峰,郭彦非. 地铁盾构隧道上方基坑开挖卸荷-加载影响研究[J]. , 2018, 39(7): 2318-2326.
[6] 段敏克,蒋长宝,俞 欢,陆天宇,钮彬炜,孙东玲,. 分级加-卸载条件下原煤的渗透及能耗特征研究[J]. , 2018, 39(4): 1346-1354.
[7] 亓宪寅,李家卓,王 威,. 基于不同方向模量损失率的含瓦斯煤各向异性渗透模型[J]. , 2018, 39(2): 635-643.
[8] 刘金辉,李文枭,刘宇森,刘保国,. 多孔含水岩层的相似材料配比研究[J]. , 2018, 39(2): 657-664.
[9] 孙阳阳,王 源,张清华,段建立,张文渊,章征林,由泽伟,. 模型相似材料内部应变光纤量测应变传递[J]. , 2018, 39(2): 759-764.
[10] 汪北方,梁 冰,王俊光,孙可明,孙维吉,迟海波,. 煤矿地下水库岩体碎胀特性试验研究[J]. , 2018, 39(11): 4086-4092.
[11] 徐 楚,胡新丽,何春灿,徐 迎,周 昌. 水库型滑坡模型试验相似材料的研制及应用[J]. , 2018, 39(11): 4287-4293.
[12] 岳 哲,叶义成,王其虎,姚 囝,施耀斌. 基于量纲分析的岩石相似材料抗压强度计算模型[J]. , 2018, 39(1): 216-221.
[13] 刘晓云,叶义成,王其虎,张 华,刘艳章,刘 洋,. 单轴压缩下不同强度组合复合岩体相似材料试件力学特性研究[J]. , 2017, 38(S2): 183-190.
[14] 王 鹏,舒 才,施 峰,胡国忠,王宏图,. 不同砂胶比、密度和含水性相似材料力学性质正交试验研究[J]. , 2017, 38(S2): 229-235.
[15] 田 威,裴志茹,韩 女. 基于CT扫描与3D打印技术的岩体三维重构及力学特性初探[J]. , 2017, 38(8): 2297-2305.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
[1] 王 刚,李术才,王明斌. 渗透压力作用下加锚裂隙岩体围岩稳定性研究[J]. , 2009, 30(9): 2843 -2849 .
[2] 刘玉成,曹树刚,刘延保. 可描述地表沉陷动态过程的时间函数模型探讨[J]. , 2010, 31(3): 925 -931 .
[3] 刘恩龙. 岩土破损力学:结构块破损机制与二元介质模型[J]. , 2010, 31(S1): 13 -22 .
[4] 介玉新,杨光华. 基于广义位势理论的弹塑性模型的修正方法[J]. , 2010, 31(S2): 38 -42 .
[5] 杨建民,郑 刚. 基坑降水中渗流破坏归类及抗突涌验算公式评价[J]. , 2009, 30(1): 261 -264 .
[6] 周 华,王国进,傅少君,邹丽春,陈胜宏. 小湾拱坝坝基开挖卸荷松弛效应的有限元分析[J]. , 2009, 30(4): 1175 -1180 .
[7] 叶 飞,朱合华,何 川. 盾构隧道壁后注浆扩散模式及对管片的压力分析[J]. , 2009, 30(5): 1307 -1312 .
[8] 陈 林,张永兴,冉可新. 考虑剪应力作用的挡土墙主动土压力计算[J]. , 2009, 30(S2): 219 -223 .
[9] 罗 强 ,王忠涛 ,栾茂田 ,杨蕴明 ,陈培震. 非共轴本构模型在地基承载力数值计算中若干影响因素的探讨[J]. , 2011, 32(S1): 732 -0737 .
[10] 王云岗 ,章 光 ,胡 琦. 斜桩基础受力特性研究[J]. , 2011, 32(7): 2184 -2190 .