›› 2005, Vol. 26 ›› Issue (9): 1502-1507.

• Fundamental Theroy and Experimental Research • Previous Articles     Next Articles

Development of geomembrane strain gauge and its application (Ⅰ): gauges

GONG Lv-hua1, LI Qing-yun2, BAO Cheng-gang2   

  1. 1. Institute of Rock and Soil Mechanics, Chinese Academy of Sciences, Wuhan 430071, China; 2. Key Laboratory of Geotechnical Mechanics and Engineering of Ministry of Water Resources, wuhan 430010, China
  • Received:2004-11-22 Online:2005-09-10 Published:2013-12-30

Abstract: Geomembrane strain gauge is a new kind of instrument used to measure strain of geomembrane. The key techniques in measuring large strain for the materials with low elastic modulus such as geotextiles and geomembranes were solved in the Chinese National 7th and 8th Five-Year Key Science and Technology Research Project. These techniques involved developing special method to achieve best sticking effect, seeking appropriate glue with the same lower modulus after being solidified to be compatible with geomembrane; developing new method in calibrating the gauge to get the two key parameters ( sensitivity coefficient k, and property index of geomebrane A) and solving problems in installation and protection. The gauge is reliable and durable in rigorous environment. It was used in-situ with good performance to monitor the strain of geomembrane in the 2nd-stage upstream cofferdam for Three Georges Project in May 1998.

Key words: geomembrane strain gauge, glue, calibration, waterproof geomembrane

CLC Number: 

  • TV 41
  • Please send e-mail to pingzhou3@126.com if you would like to read full paper in English for free. Parts of our published papers have English translations.
[1] LIANG Bo, LI Yan-jun, LING Xue-peng, ZHAO Ning-yu, ZHANG Qing-song, . Determination of earth pressure by miniature earth pressure cell in centrifugal model test [J]. Rock and Soil Mechanics, 2019, 40(2): 818-826.
[2] ZHU Yong, FENG Xia-ting, ZHOU Hui, ZHANG Chuan-qing, ZHANG Ming-qiang,. Calibration of partial factors of shear strength parameters using standard deviation feedback method [J]. , 2018, 39(1): 151-157.
[3] ZHANG Hua, ZHANG Feng, YUAN Mi , SHEN Ke. Study of temperature effect on domestic quantitative filter paper’s calibration curves [J]. , 2016, 37(S1): 274-280.
[4] LU Ying-fa. A new constitutive model and its parameter calibration [J]. , 2016, 37(8): 2138-2144.
[5] DAI Feng, WEI Ming-dong, XU Nu-wen, XU Yuan, ZHAO Tao. Progressive fracture mechanism of CCNSCB rock fracture toughness specimens and calibration of wide-range dimensionless stress intensity factors [J]. , 2016, 37(11): 3215-3223.
[6] CHU Ya, LIU Song-yu, CAI Guo-jun, . Research and development of calibration chamber model test with in-situ injection device [J]. , 2015, 36(S1): 452-458.
[7] ZHU Cai-hui, LI Ning, YUAN Ji-guo. Measurement and distribution of earth pressure of high fill in loess gully [J]. , 2015, 36(3): 827-836.
[8] YAN Cheng-zeng,ZHENG Hong,GE Xiu-run. Unified calibration based potential contact force in discrete element method [J]. , 2015, 36(1): 249-256.
[9] JIANG Ming-jing ,DAI Yong-sheng ,WANG Xin-xin ,WANG Chuang ,WU Xiao-feng , . Development of a calibration chamber for cone penetration test and corresponding experimental research [J]. , 2014, 35(7): 2109-2117.
[10] BAI Fu-qing LIU Si-hong YUAN Jiao. Calibration test for total suction wetting curve of filter paper [J]. , 2011, 32(8): 2336-2340.
[11] WANG Wei , XU Wei-ya , . A new method of testing rock properties [J]. , 2008, 29(S1): 538-544.
[12] GONG Lü-hua , LI Qing-yun , BAO Cheng-gang,. Development of geomembrane strain gauge and its application (II): Application [J]. , 2005, 26(12): 2035-2040.
[13] JIA Xue-ming, WANG Qi-zhi. Wide range calibration of the stress intensity factor for the fracture toughness specimen CCNBD [J]. , 2003, 24(6): 907-912.
[14] GU Zhi-meng, CHEN Jian. Structural optimizafion analysis of hydro-photoelectric pressure gauge and its experimental research [J]. , 2003, 24(2): 311-315.
[15] CHENG Jin-ru , SHEN Zhen-yao , LI Man-xi, . Suction calibration for filter paper [J]. , 2002, 23(6): 800-802.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
[1] HU Xiu-qing, CAI Yuan-qiang. Vertical vibration of rigid embedded foundations in saturated soil overlying bedrock[J]. , 2009, 30(12): 3739 -3746 .
[2] CHEN Zheng-han, FANG Xiang-wei, ZHU Yuan-qing, QIN Bing, WEI Xue-wen. Research on meso-structures and their evolution laws of expansive soil and loess[J]. , 2009, 30(1): 1 -11 .
[3] XIA Li-nong, LEI Ming, NIE Chong-jun. Field test of influences of load at pile top on negative skin friction behaviors[J]. , 2009, 30(3): 664 -668 .
[4] WANG Dong-lin, LUAN Mao-tian , YANG Qing. Experimental study of soil-water characteristic curve of remolded unsaturated clay[J]. , 2009, 30(3): 751 -756 .
[5] KONG Gang-qiang, YANG Qing, NIAN Ting-kai, HU Qing-chun. Study of characteristics of compression capacity and negative skin friction for belled wedge pile[J]. , 2011, 32(2): 503 -509 .
[6] CHEN Ming,LU Wen-bo,ZHOU Chuang-bing,LUO Yi. Influence of initial in-situ stress on blasting-induced cracking zone in tunnel excavation[J]. , 2009, 30(8): 2254 -2258 .
[7] ZHANG Hong , ZHENG Ying-ren , YANG Zhen , WANG Qian-yuan , GE Su-ming. Exploration of design methods of support structure in loess tunnel[J]. , 2009, 30(S2): 473 -478 .
[8] XIA Zhen-yao , XU Wen-nian , WANG Le-hua. Research on characteristics of early strength of ecological slope-protected base material of vegetation-growing concrete[J]. , 2011, 32(6): 1719 -1724 .
[9] LIU Han-long, PENG Jie, CHEN Yong-hui , ZHENG Shao-jun . Analysis of 3-D Biot consolidation FEM of expressway’s soft foundation improved by vacuum combined surcharge preloading[J]. , 2003, 24(6): 1029 -1033 .
[10] QIU Xiang-bo , YANG Dong-mei , XU Bang-shu , LI Shu-cai . 3-D FLAC application in stability analysis of ventilator chamber of highway tunnel[J]. , 2003, 24(5): 751 -754 .