循环剪切荷载作用下含二阶起伏体模拟岩石节理力学特性研究

›› 2014, Vol. 299 ›› Issue (2): 371-379.

循环剪切荷载作用下含二阶起伏体模拟岩石节理力学特性研究

朱小明^{1, 2}，李海波²，刘博²

1.甘肃省交通规划勘察设计院有限责任公司，兰州 730030；2.中国科学院武汉岩土力学研究所岩土力学与工程国家重点实验室，武汉 430071

收稿日期:2012-11-19 出版日期:2014-02-11 发布日期:2014-02-18
作者简介:朱小明，男，1982年生，博士，高级工程师，主要从事隧道及地下工程、岩土工程设计和科研方面的研究
基金资助:
国家杰出青年基金资助项目（No. 51025935）；国家自然科学基金青年项目（No. 40872188）。

Study of mechanical characteristics of simulated rock joints with second-order asperity under cyclic shear loading

ZHU Xiao-ming^{1, 2}, LI Hai-bo², LIU Bo²

1. Gansu Province Transportation Planning, Survey and Design Institute Co., Ltd., Lanzhou 730030, China; 2. State Key Laboratory of Geomechanics and Geotechnical Engineering, Institute of Rock and Soil Mechanics, Chinese Academy of Sciences, Wuhan 430071, China

Received:2012-11-19 Online:2014-02-11 Published:2014-02-18

摘要/Abstract

摘要： 利用人工材料浇注含二阶起伏体的模拟岩石节理试样，进行常法向荷载循环剪切试验，研究节理剪切力学特性在循环剪切过程中的劣化规律。试验结果表明：二阶起伏体对节理循环剪切力学特性有重要影响，剪切强度、剪切刚度、剪胀角随剪切循环次数增大而衰减，衰减趋势随着二阶起伏度的增大而加快；法向应力、二阶起伏度较大时，二阶起伏体对剪切力学特性的影响主要体现在第1轮剪切循环中，在随后的剪切循环中影响不明显；法向应力、二阶起伏度较小时，二阶起伏体的影响在前几轮循环剪切过程中均有较清晰的体现。基于Hertz接触力学理论，提出了节理面微凸体球面接触细观模型，揭示了节理循环剪切宏观试验现象的力学机制

关键词: 岩石力学, 节理, 循环剪切, 二阶起伏体, 接触力学

Abstract: Simulated rock joint samples with second-order asperity are made of artificial material. A series of constant normal load (CNL) cyclic shear tests are carried out to study the deterioration law of shear mechanical characteristics during process of cyclic shearing. Based on the experimental results，it can be found that the second-order asperity has an important influence on the shear mechanical properties of joint samples under cyclic shear loading. The shear strength, shear stiffness and dilatancy angle decrease with an increase of shear cycles, and decay more quickly with an increase of second-order asperity height. The influence of second-order asperity on the shear mechanical properties is mainly reflected in the first shear cycle with higher height of second-order asperity under higher level of normal stress, and it has no obvious effect on subsequent shear cycles. On the other hand, the influence is reflected more clearly during the begging of the shear cycles to the joints with smaller height of second-order asperity under lower level of normal stress. Finally, based on the theory of Hertz contact mechanics, a spherical contact microscopic model of asperity on the joint surface is proposed; and the mechanisms of macroscopic phenomenon during cyclic shear tests are revealed by the model.

Key words: rock mechanics, joints, cyclic shear, second-order asperity, contact mechanics

中图分类号:

TU 458+.3

朱小明，李海波，刘博，. 循环剪切荷载作用下含二阶起伏体模拟岩石节理力学特性研究[J]. , 2014, 299(2): 371-379.

ZHU Xiao-ming , LI Hai-bo , LIU Bo，. Study of mechanical characteristics of simulated rock joints with second-order asperity under cyclic shear loading[J]. , 2014, 299(2): 371-379.

参考文献

相关文章 15

[1]	王培涛, 黄正均, 任奋华, 章亮, 蔡美峰, . 基于3D打印的含复杂节理岩石直剪特性及破坏机制研究[J]. 岩土力学, 2020, 41(1): 46-56.
[2]	夏才初, 喻强锋, 钱鑫, 桂洋, 庄小清. 常法向刚度条件下岩石节理剪切−渗流特性试验研究[J]. 岩土力学, 2020, 41(1): 57-66.
[3]	芮圣洁, 国振, 王立忠, 周文杰, 李雨杰, . 钙质砂与钢界面循环剪切刚度与阻尼比的试验研究[J]. 岩土力学, 2020, 41(1): 78-86.
[4]	张艳博, 孙林, 姚旭龙, 梁鹏, 田宝柱, 刘祥鑫, . 花岗岩破裂过程声发射关键信号时频特征试验研究[J]. 岩土力学, 2020, 41(1): 157-165.
[5]	大久保诚介, 汤杨, 许江, 彭守建, 陈灿灿, 严召松, . 3D-DIC系统在岩石力学试验中的应用[J]. 岩土力学, 2019, 40(8): 3263-3273.
[6]	张艳博, 梁鹏, 孙林, 田宝柱, 姚旭龙, 刘祥鑫, . 单轴压缩下饱水花岗岩破裂过程声发射频谱特征试验研究[J]. 岩土力学, 2019, 40(7): 2497-2506.
[7]	马秋峰, 秦跃平, 周天白, 杨小彬. 多孔隙岩石加卸载力学特性及本构模型研究[J]. 岩土力学, 2019, 40(7): 2673-2685.
[8]	田军, 卢高明, 冯夏庭, 李元辉, 张希巍. 主要造岩矿物微波敏感性试验研究[J]. 岩土力学, 2019, 40(6): 2066-2074.
[9]	金俊超, 佘成学, 尚朋阳. 基于应变软化指标的岩石非线性蠕变模型[J]. 岩土力学, 2019, 40(6): 2239-2246.
[10]	许江, 瞿佳美, 刘义鑫, 彭守建, 王威, 吴善康, . 循环剪切荷载作用下充填物对结构面剪切特性影响试验研究[J]. 岩土力学, 2019, 40(5): 1627-1637.
[11]	苏国韶, 燕思周, 闫召富, 翟少彬, 燕柳斌, . 真三轴加载条件下岩爆过程的声发射演化特征[J]. 岩土力学, 2019, 40(5): 1673-1682.
[12]	李书兆, 王忠畅, 贾旭, 贺林林, . 软黏土中张紧式吸力锚循环承载力简化计算方法[J]. 岩土力学, 2019, 40(5): 1704-1712.
[13]	王宇, 艾芊, 李建林, 邓华锋, . 考虑不同影响因素的砂岩损伤特征及其卸荷破坏细观特性研究[J]. 岩土力学, 2019, 40(4): 1341-1350.
[14]	李晓照, 戚承志, 邵珠山, 屈小磊, . 基于细观力学脆性岩石剪切特性演化模型研究[J]. 岩土力学, 2019, 40(4): 1358-1367.
[15]	高青鹏, 曹平, 王飞, 王柱. 压剪作用下多节理类岩试样力学性质及破坏判据[J]. 岩土力学, 2019, 40(3): 1013-1022.

Metrics

Viewed

Full text

Abstract

Cited

Shared

Discussed