Rock and Soil Mechanics ›› 2021, Vol. 42 ›› Issue (2): 519-528.doi: 10.16285/j.rsm.2020.0164

• Geotechnical Engineering • Previous Articles     Next Articles

Predicting TBM penetration rate with the coupled model of partial least squares regression and deep neural network

YAN Chang-bin1, WANG He-jian1, YANG Ji-hua2, CHEN Kui3, ZHOU Jian-jun3, GUO Wei-xin2   

  1. 1. School of Civil Engineering, Zhengzhou University, Zhengzhou, Henan 450001, China; 2. Yellow River Engineering Consulting Co., Ltd, Zhengzhou, Henan 450003, China; 3. State Key Laboratory of Shield Machine and Boring Technology, China Railway Tunnel Group Co., Ltd., Zhengzhou, Henan 450001, China
  • Received:2020-02-22 Revised:2020-11-19 Online:2021-02-10 Published:2021-02-09
  • Supported by:
    This work was supported by the National Natural Science Foundation of China (41972270,U1504523), the Key Science and Technology Research Project of Henan (182102210014) and the Opening Foundation of State Key Laboratory of Shield Machine and Boring Technology (SKLST-2019-K06).

Abstract: The scientific prediction of the TBM penetration rate is of great significance to the selection of hydraulic tunnel construction methods, construction schedule and cost estimation. In view of the high nonlinearity, fuzziness and complexity of TBM excavation process, and in order to improve the prediction accuracy and computational efficiency, the partial least squares regression (PLSR) has been applied to extract the principal components of the influencing parameters. Then the deep neural network (DNN) is employed to train and forecast the TBM penetration rate. A prediction model of TBM penetration rate based on the coupled method of PLSR and DNN is proposed. Based on the measured data of the double-shield TBM construction of a water conveyance tunnel in the Lanzhou water source construction project, six impact parameters including the rock uniaxial compressive strength, rock uniaxial tensile strength, cutter head thrust, cutter head speed, rock mass integrity coefficient and rock Cerchar abrasiveness index are selected to verify the prediction reasonability of the model. The fitting and prediction accuracy of the different prediction methods are compared and analyzed. The research results show that the PLSR can effectively overcome the problem of multiple collinearity between the independent variables. The extracted principal components are trained as the input layer of the DNN, which simplifies the structure of the neural network. The PLSR-DNN coupled model effectively avoids the over-fitting and inadequate fitting problems. It has the characteristics of fast convergence, stable solution and high fitting accuracy. The average relative fitting error of the PLSR-DNN prediction model is 2.96%, and the average relative prediction error is 3.27%. The fitting accuracy and prediction accuracy of the PLSR-DNN prediction model is significantly higher than those of PLSR model alone, BP neural network model and SVR model, respectively.

Key words: tunnel boring machine, penetration rate, partial least squares regression, deep neural network, coupling prediction model

CLC Number: 

  • TU 94,TV 554
[1] SHI Lin-ken, ZHOU Hui, SONG Ming, LU Jing-jing, ZHANG Chuan-qing, LU Xin-jing, . Physical experimental study on excavation disturbance of TBM in deep composite strata [J]. Rock and Soil Mechanics, 2020, 41(6): 1933-1943.
[2] LIU He, LIU Quan-sheng, TANG Xu-hai, LUO Ci-you, WAN Wen-kai, CHEN Lei, PAN Yu-cong, . Identification of the interaction loads between TBM shield and surrounding rock [J]. Rock and Soil Mechanics, 2019, 40(12): 4946-4954.
[3] LIU Quan-sheng, PENG Xing-xin, HUANG Xing, LEI Guang-feng, WEI Lai, LIU He,. Monitoring shield stress of tunnel boring machine and jamming warning [J]. , 2018, 39(9): 3406-3414.
[4] ZHAI Shu-fang, ZHOU Xiao-ping, BI Jing, . Numerical study of rock fragmentation by TBM cutters using general particle dynamics (GPD) [J]. , 2018, 39(7): 2699-2707.
[5] DAI Xiao-ru, WANG Jian-hua, FAN Yi-fei, . Issues of numerical simulation of the spudcan penetration based on CEL method [J]. , 2018, 39(6): 2278-2286.
[6] LIU Quan-sheng, ZHAO Yi-fan, ZHANG Xiao-ping, KONG Xiao-xuan. Study and discussion on point load test for evaluating rock strength of TBM tunnel constructed in limestone [J]. , 2018, 39(3): 977-984.
[7] CHEN Wei-zhong, MA Chi-shuai, TIAN Hong-ming, YANG Jian-ping,. Discussion on rockburst predictive method applying to TBM tunnel construction [J]. , 2017, 38(S2): 241-249.
[8] MA Chi-shuai, CHEN Wei-zhong, TIAN Hong-ming, YANG Jian-ping,. Discussion on rock strength estimating method based on TBM parameters [J]. , 2017, 38(S2): 295-303.
[9] LIU Quan-sheng, LIU Qi, LIU Xue-wei, SUN Lei, ZHANG Xiao-bo, JI Jie,. Experimental study on penetration failure of soft-hard interbedded rock mass under a wedge indenter [J]. , 2017, 38(7): 1849-1855.
[10] HUANG Xing, LIU Quan-sheng, PENG Xing-xin, LEI Guang-feng, WEI Lai,. Analysis and comprehensive prevention-control for TBM jamming induced by squeezing deformation of surrounding rock around water diversion tunnel from Datong river into Huangshui river [J]. , 2017, 38(10): 2962-2972.
[11] JI Pei-Qi, ZHANG Xiao-Ping, ZHANG Qi,. Partide flow code analysis of effect of ductility-brittleness change on TBM cutters rock fragmentation process and its failure mode [J]. , 2016, 37(S2): 724-734.
[12] LIU Quan-sheng ,PAN Yu-cong,KONG Xiao-xuan,LIU Jian-ping,. Experimental investigation on mudstone fragmentation characteristics in indentation process by TBM disc cutter [J]. , 2016, 37(S1): 166-174.
[13] CHENG Jian-long, YANG Sheng-qi, PAN Yu-cong, Tian Wen-Ling, ZHAO Wei-sheng ,. Study of features of surrounding rock deformation and stress field in squeezing ground excavation by double shield TBM [J]. , 2016, 37(S1): 371-380.
[14] TAN Qing , YI Nian-en , XIA Yi-min , ZHU Yi , ZHANG Xu-hui , LING Nai-kuang , . Study of calculation equation of TBM disc cutter optimal spacing [J]. , 2016, 37(3): 883-892.
[15] ZHOU Jian-jun , YANG Zhen-xing , . Discussion on key issues of TBM construction for long and deep tunnels [J]. , 2014, 35(S2): 299-305.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
[1] YAO Yang-ping, HOU Wei. Basic mechanical behavior of soils and their elastoplastic modeling[J]. , 2009, 30(10): 2881 -2902 .
[2] XU Su-chao, FENG Xia-ting, CHEN Bing-rui. Experimental study of skarn under uniaxial cyclic loading and unloading test and acoustic emission characteristics[J]. , 2009, 30(10): 2929 -2934 .
[3] ZHANG Li-ting, QI Qing-lan, WEI Jing HUO Qian, ZHOU Guo-bin. Variation of void ratio in course of consolidation of warping clay[J]. , 2009, 30(10): 2935 -2939 .
[4] ZHANG Qi-yi. Study of failure patterns of foundation under combined loading[J]. , 2009, 30(10): 2940 -2944 .
[5] YI Jun, JIANG Yong-dong, XUAN Xue-fu, LUO Yun, ZHANG Yu. A liquid-solid dynamic coupling modelof ultrasound enhanced coalbed gas desorption and flow[J]. , 2009, 30(10): 2945 -2949 .
[6] LU Zheng, YAO Hai-lin, LUO Xing-wen, HU Meng-ling. 3D dynamic responses of layered ground under vehicle loads[J]. , 2009, 30(10): 2965 -2970 .
[7] SUN Yong. Research on calculation method of double-row anti-sliding structure under sliding surface[J]. , 2009, 30(10): 2971 -2977 .
[8] CHU Xi-hua, XU Yuan-jie. Studies on transformation from M-C criterion to Drucker-Prager criterions based on distortion energy density[J]. , 2009, 30(10): 2985 -2990 .
[9] LI Lei, ZHU Wei, LIN Cheng, T. OHKI. Study of wet and dry properties of solidified sludge[J]. , 2009, 30(10): 3001 -3004 .
[10] ZHANG Ming-yi, LIU Jun-wei, YU Xiu-xia. Field test study of time effect on ultimate bearing capacity of jacked pipe pile in soft clay[J]. , 2009, 30(10): 3005 -3008 .