岩土力学 ›› 2022, Vol. 43 ›› Issue (S1): 55-66.doi: 10.16285/j.rsm.2022.0029

• 基础理论与实验研究 • 上一篇    下一篇

差异含水率下全风化混合花岗岩抗剪强度 与微观结构试验研究

汤华1,严松1, 2,杨兴洪3,吴振君1   

  1. 1. 中国科学院武汉岩土力学研究所 岩土力学与工程国家重点实验室,湖北 武汉 430071;2. 中国科学院大学,北京 100049; 3. 云南交投集团公路建设有限公司,云南 昆明 650200
  • 收稿日期:2022-01-06 修回日期:2022-05-26 出版日期:2022-06-30 发布日期:2022-07-13
  • 通讯作者: 严松,男,1994年生,硕士研究生,主要从事特殊土工程性质的研究。E-mail: songYan_whrsm@163.com E-mail:htang@whrsm.ac.cn
  • 作者简介:汤华,男,1978年生,博士,研究员,博士生导师,主要从事工程地质方面的研究工作。
  • 基金资助:
    云交科教(2018)45号。

Shear strength and microstructure of completely decomposed migmatitic granite under different water contents

TANG Hua1, YAN Song1, 2, YANG Xing-hong3, WU Zhen-jun1   

  1. 1. State Key Laboratory of Geomechanics and Geotechnical Engineering, Institute of Rock and Soil Mechanics, Chinese Academy of Sciences, Wuhan, Hubei 430071, China; 2. University of Chinese Academy of Sciences, Beijing 100049, China; 3. Yunnan Communication Investment & Construction Group Highway Construction Co., Ltd., Kunming, Yunnan 650200, China
  • Received:2022-01-06 Revised:2022-05-26 Online:2022-06-30 Published:2022-07-13
  • Supported by:
    This work was supported by the Department of Transport of Yunnan Province (2018 No. 45).

摘要: 全风化混合花岗岩是一类成因极为特殊的岩石,当前对其力学性质和微观结构研究极少。为探究临沧全风化混合花岗岩宏观强度特性与微观结构间的联系,对不同含水率试样开展三轴试验和扫描电镜测试,提取计算表征颗粒和孔隙尺寸、形态与定向特征的微观结构参数,对比分析这些微观结构参数的变化规律,揭示了控制全风化混合花岗岩宏观强度特性的微观机制。研究结果表明:随着含水率升高,试样应力−应变曲线表现出差异化的硬化特征,抗剪强度显著劣化,内摩擦角呈线性趋势衰减,而黏聚力则上下波动;低含水率状态下,试样孔隙分布以微、小孔为主,颗粒形态多为角状和次角状的长条形且具有一定的定向性;随着含水率升高,孔隙含量呈上升趋势,形成了分布均匀的蜂窝状中、大孔且在轴向荷载作用下更容易被压缩,颗粒的形态向圆形发展,整体分布表现为混乱无序,定向性较差。全风化混合花岗岩的力学性质表现本质上是微观颗粒、孔隙结构相互作用的结果,含水率升高弱化了粗颗粒间的摩擦性,黏土颗粒遇水产生不均匀膨胀,在微观层面上直接导致孔隙的贯通、粗化以及充填结构的损伤、破坏,继而在宏观层面上表现出力学性能下降。研究成果为全风化混合花岗岩力学性质及微观结构损伤演化的认知提供了有益参考。

关键词: 全风化混合花岗岩, 抗剪强度, 微观结构, 含水率, 颗粒, 孔隙

Abstract: Completely decomposed migmatitic granite(CDMG)is a kind of rock with special genesis, but there is little research on its mechanical properties and microstructure. In order to explore the relationship between macroscopic strength characteristics and microstructure of Lincang CDMG, triaxial tests and scanning electron microscopy tests were carried out on samples with different moisture contents, and the microstructure parameters that characterized the size, morphology and orientation of particles and pores were extracted and calculated. By investigating these microstructure parameters, the micro mechanism controlling the macroscopic strength characteristics of CDMG is revealed. The results show that with the increase of moisture content, the stress-strain curve of the sample exhibits a dissimilar hardening effect, the shear strength deteriorates significantly, the internal friction angle decreases linearly, and the cohesion fluctuates up and down. Under the condition of low moisture content, the samples are mainly characterized by micro and small pores, and the particle morphology is mostly angular and sub-angular strip with certain orientation. With the increase of moisture content, the pore content shows an upward trend, forming evenly distributed honeycomb medium and large pores, which are easier to be compressed under axial load. The shape of particles develops to be round, and the overall distribution is disorderly and poorly oriented. Comprehensive analysis of the above results shows that the mechanical properties of CDMG are essentially the result of the interaction between microscopic particles and pore structure. The increase of moisture content weakens the friction between coarse particles, resulting in uneven expansion of clay particles, which leads to pore connection and coarsening and damage of filling structure at the micro level, and then shows mechanical properties reduction at the macro level. The research results provide useful reference for the cognition of mechanical properties and microstructure damage evolution of CDMG.

Key words: completely decomposed migmatitic granite, shear strength, microstructure, moisture content, particle, pore

中图分类号: 

  • TU443
[1] 刘宽, 叶万军, 高海军, 董琪, . 酸碱污染黄土抗剪强度演化规律及微观机制[J]. 岩土力学, 2022, 43(S1): 1-12.
[2] 岑夺丰, 刘畅, 黄达. 灰岩层面拉剪力学特性及层面起伏效应研究[J]. 岩土力学, 2022, 43(S1): 77-87.
[3] 张磊, 田苗苗, 卢硕, 李明雪, 李菁华, . 不同含水率煤体液氮致裂渗透率变化规律 及应力敏感性分析[J]. 岩土力学, 2022, 43(S1): 107-116.
[4] 曾立峰, 邵龙潭, 郭晓霞, . 土中有效应力概念的起源与发展[J]. 岩土力学, 2022, 43(S1): 127-144.
[5] 李丽华, 方亚男, 肖衡林, 李文涛, 曹毓, 徐可, . 赤泥复合物固化/稳定化镉污染土特性研究[J]. 岩土力学, 2022, 43(S1): 193-202.
[6] 刘杰, 崔瑜瑜, 卢正, 姚海林, . 分散土分散性影响因素及其判别方法初探[J]. 岩土力学, 2022, 43(S1): 237-244.
[7] 申嘉伟, 周博, 付茹, 库泉, 汪华斌, . 钙质砂单颗粒破碎强度和模式的试验研究[J]. 岩土力学, 2022, 43(S1): 312-320.
[8] 高敏, 何绍衡, 夏唐代, 丁智, 王新刚, 张琼方, . 复杂应力路径下钙质砂颗粒破碎及抗剪强度特性[J]. 岩土力学, 2022, 43(S1): 321-330.
[9] 潘振辉, 肖涛, 李萍, . 压实度与制样含水率对压实黄土微结 构及水力特性的影响[J]. 岩土力学, 2022, 43(S1): 357-366.
[10] 欧孝夺, 甘雨, 潘鑫, 江杰, 覃英宏, . 重塑膨胀岩热传导性能及影响因素试验研究[J]. 岩土力学, 2022, 43(S1): 367-374.
[11] 胡训健, 卞康, 刘建, 谢正勇, 陈明, 李冰洋, 岑越, . 离散裂隙网络对岩石力学性质和声发射特性 影响的颗粒流分析[J]. 岩土力学, 2022, 43(S1): 542-552.
[12] 王嘉璐, 张升, 童晨曦, 戴邵衡, 黎章. 基于染色标定的钙质砂颗粒破碎级配 转移矩阵试验研究[J]. 岩土力学, 2022, 43(8): 2222-2232.
[13] 郑威威, 洪义, 王立忠, . 含气软黏土的不排水抗剪强度计算模型[J]. 岩土力学, 2022, 43(8): 2233-2240.
[14] 程建龙, 邹清友, 杨圣奇, 李晓昭, 梁泉, 曲磊, 梅炎, . 水力切缝上方TBM滚刀贯入破坏机制模拟研究[J]. 岩土力学, 2022, 43(8): 2317-2326.
[15] 刘观仕, 赵守道, 牟智, 莫燕坤, 赵青松, . 结构性对膨胀土收缩特性影响的试验研究[J]. 岩土力学, 2022, 43(7): 1772-1780.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
[1] 姚仰平,侯 伟. 土的基本力学特性及其弹塑性描述[J]. , 2009, 30(10): 2881 -2902 .
[2] 徐金明,羌培,张鹏飞. 粉质黏土图像的纹理特征分析[J]. , 2009, 30(10): 2903 -2907 .
[3] 向天兵,冯夏庭,陈炳瑞,江 权,张传庆. 三向应力状态下单结构面岩石试样破坏机制与真三轴试验研究[J]. , 2009, 30(10): 2908 -2916 .
[4] 石玉玲,门玉明,彭建兵,黄强兵,刘洪佳. 地裂缝对不同结构形式桥梁桥面的破坏试验研究[J]. , 2009, 30(10): 2917 -2922 .
[5] 夏栋舟,何益斌,刘建华. 土-结构动力相互作用体系阻尼及地震反应分析[J]. , 2009, 30(10): 2923 -2928 .
[6] 徐速超,冯夏庭,陈炳瑞. 矽卡岩单轴循环加卸载试验及声发射特性研究[J]. , 2009, 30(10): 2929 -2934 .
[7] 张力霆,齐清兰,魏静,霍倩,周国斌. 淤填黏土固结过程中孔隙比的变化规律[J]. , 2009, 30(10): 2935 -2939 .
[8] 张其一. 复合加载模式下地基失效机制研究[J]. , 2009, 30(10): 2940 -2944 .
[9] 易 俊,姜永东,鲜学福,罗 云,张 瑜. 声场促进煤层气渗流的应力-温度-渗流压力场的流固动态耦合模型[J]. , 2009, 30(10): 2945 -2949 .
[10] 陶干强,杨仕教,任凤玉. 崩落矿岩散粒体流动性能试验研究[J]. , 2009, 30(10): 2950 -2954 .